Effect of Shear on Simple Buckling Problem
Publication: Journal of Engineering Mechanics
Volume 119, Issue 5
Abstract
The present note studies the buckling behavior of a hinged‐hinged column, taking into consideration the effect of shear deformation. The approach taken is an extension of the method proposed by Timoshenko and Gere in 1961. In this approach, the axial force is assumed to act in the direction tangent to the deformed axis of the member, and the shear force is assumed to act in the direction normal to the deformed axis. The same constitutive equation as Timoshenko and Gere is used. Further analysis differs in the following: (1) a different shear‐correction factor was used; and (2) the assumption that displacements are small was not used. As a result of latter assumption, the differential equations presented in the note are nonlinear. The solution to this equation yields not only the critical force, but the buckled shape of the rod, as well. The buckled shape is obtained by numerical integration. It is shown that by decreasing the shear stiffness (under the constant compressive force) the maximum deflection increases and, at a certain value, the possibility for higher buckling modes appears.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Antman, S. S., and Rosenfeld, G. (1978). “Global behavior of buckled states of nonlinearly elastic rods.” SIAM Rev., 20, 513–566.
2.
Atanackovic, T. M., Djukic, D. S., and Jones, S. E. (1991). “Effect of shear on stability and nonlinear behavior of a rotating rod.” Arch. Appl. Mech., 61, 285–294.
3.
Buchanan, G. R., Huang, J. C., and Cheng, T. K. M. (1970). “Effect of shear on nonlinear behavior of elastic bars.” J. Appl. Mech., 37, 212–215.
4.
DaDeppo, D. A., and Schmidt, R. (1972). “Large deflections of elastic arches and beams with shear deformation.” Indust. Math., 22, 17–34.
5.
Gjelsvik, A. (1991). “Stability of built‐up columns.” J. Engrg. Mech., ASCE, 117(6), 1331–1345.
6.
Goto, J., Yoshimitsu, T., and Obata, M. (1990). “Elliptic integral solutions of plane elastica with axial and shear deformations.” Int. J. Solids Struct., 26, 375–390.
7.
Huddelston, J. V. (1972). “Effect of shear deformation on the elastica with axial strain.” Int. J. Numer. Methods in Engrg., 4, 433–444.
8.
Rehfield, L. W., and Murthy, L. N. (1982). “Toward a new engineering theory of bending: fundamentals.” AIAA J., 20, 693–699.
9.
Renton, J. D. (1991). “Generalized beam theory applied to shear stiffness.” Int. J. Solids Struct., 27, 1955–1967.
10.
Schmidt, R., and DaDeppo, D. A. (1971). “Nonlinear theory of arches with transverse shear deformation and rotary inertia.” Int. Math., 21, 33–49.
11.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability. McGraw‐Hill Co., Inc., New York, N.Y.
12.
Volmir, A. S. (1967). Stability of deformable systems. Nauka, Moscow, Russia (in Russian).
13.
Ziegler, H. (1977). Principles of structural stability. Birkhäuser, Basel, Switzerland.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Aug 11, 1992
Published online: May 1, 1993
Published in print: May 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.