Three‐Degree‐of‐Freedom Model for Galloping. Part I: Formulation
This article has a reply.
VIEW THE REPLYPublication: Journal of Engineering Mechanics
Volume 119, Issue 12
Abstract
A three‐degree‐of‐freedom model is developed to comprehensively describe and predict different galloping behavior observed on a single iced, electrical transmission line. Interactions are accommodated between a line's plunge, twist, and swing in the along‐wind direction. Eccentricity of the cross section is also considered and the longitudinal static stiffnesses of adjacent spans are included. The initiating conditions for galloping are derived in closed form. For the parameters causing galloping, perturbation techniques are employed to derive the governing bifurcation equations under the assumption of a weak nonlinearity. A total of 10 (one nonresonant and nine internal resonant) plausible cases are considered. Two different time averaging approaches are used for different cases to simplify the algebra in deriving the explicit solutions. Aerodynamic effects are incorporated in the structural stiffness matrix to improve accuracy and to extend the range of application of the perturbation. A robust criterion is developed to assess the reliability of the solutions. Explicit periodic and quasiperiodic states and their stability conditions are computed in a companion paper.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Blevins, R. D. (1974). “Flow induced vibration,” Ph.D. thesis, California Inst. of Tech., Pasadena, Calif.
2.
Blevins, R. D. (1990). Flow‐induced vibration. 2nd Ed., Van Nostrand Reinhold Co., New York, N.Y.
3.
Blevins, R. D., and Iwan, W. D. (1974). “The galloping response of a two‐degree‐of‐freedom system.” J. Appl. Mech. Trans. ASME, 96(3), 1113–1118.
4.
Clough, R. W., and Penzien, J. (1975). Dynamics of structures. McGraw‐Hill, New York, N.Y.
5.
Den Hartog, J. P. (1932). “Transmission line vibration due to sleet.” AIEE Trans., 51, part 4, 1074–1086.
6.
Desai, Y. M., Popplewell, N., Shah, A. H., and Buragohain, D. N. (1988). “Geometric nonlinear static analysis of cable supported structures.” Comput. Struct., 29(6), 1001–1009.
7.
Desai, Y. M., Popplewell, N., Shah, A. H., and Chan, J. K. (1989). “Static and dynamic behaviour of mechanical components associated with electrical transmission lines III: Part A—Theoretical perspective.” Shock Vib. Digest., 21(12), 3–8.
8.
Desai, Y. M., Shah, A. H., and Popplewell, N. (1990). “Galloping analysis for two‐degree‐of‐freedom oscillator.” J. Engrg. Mech., ASCE, 116(12), 2583–2602.
9.
EPRI Transmission Line Reference Book. (1979). Wind‐Induced Conductor Motion. Electric Power Res. Inst., Palo Alto, Calif.
10.
Gortemaker, P. C. M. (1984). “Galloping conductors and evaluation of the effectiveness of in‐span dampers.” Kema Sci. Tech. Report, 2(4), 27–39.
11.
Irvine, H. M. (1981). Cable structures. MIT Press, Cambridge, Mass.
12.
Jones, K. F. (1992). “Coupled vertical and horizontal galloping.” J. Engrg. Mech., ASCE, 118(1), 92–107.
13.
Mathur, R. K., Shah, A. H., Trainor, P. G. S., and Popplewell, N. (1987). “Dynamics of a guyed transmission tower system.” IEEE Trans., PWRD, Power Delivery, 2(3), 908–916.
14.
McConnell, K. G., and Chang, C. N. (1986). “A study of the axial‐torsional coupling effect on a sagged transmission line.” Experimental Mech., 26(4), 324–329.
15.
“Modelling of conductor galloping.” (1992). Tech. Report, No. 321 T 672, Canadian Electrical Association, Montreal, Quebec, Canada.
16.
Nayfeh, A. H., and Mook, D. T. (1979). Nonlinear oscillations. Wiley, New York, N.Y.
17.
Novak, M. (1972). “Galloping oscillations of prismatic structures.” J. Engrg. Mech., ASCE, 88(1), 27–45.
18.
Parkinson, G. V. (1989). “Phenomena and modeling of flow‐induced vibrations of bluff bodies.” Prog. Aerospace Sci., 26, 169–224.
19.
Parkinson, G. V., and Smith, J. D. (1964). “The square prison as an aeroelastic nonlinear oscillator.” Q. J. Mech. Appl. Math., 17(2), 225–239.
20.
Sanders, J. A., and Verhulst, F. (1985). Averaging methods in nonlinear dynamical systems. Springer‐Verlag, New York, N.Y.
21.
Veletsos, A. S., and Darbre, G. R. (1983). “Dynamic stiffness of parabolic cables.” Int. J. Earthquake Engrg. Struct. Dynamics, 11(3), 367–401.
22.
Yu, P., Desai, Y. M., Popplewell, N., and Shah, A. H. (1993). “Three‐degree‐of‐freedom model for galloping. Part II: Solutions.” J. Engrg. Mech., ASCE, 119(12), 2426–2448.
23.
Yu, P., Desai, Y. M., Popplewell, N., Shah, A. H., Havard, D. G., and Chan, J. K. (1991). “Simple modeling of the galloping of electrical transmission lines: An overview.” Presented at the Canadian Electrical Association Meeting, Canadian Electrical Association, Montreal, Quebec, Canada.
24.
Yu, P., and Huseyin, K. (1988). “A perturbation analysis of interactive static and dynamic bifurcations.” IEEE Trans. Autom. Contr., 33(1), 28–41.
25.
Yu, P., Shah, A. H., and Popplewell, N. (1992). “Inertially coupled galloping of iced conductors.” J. Appl. Mech., Trans. ASME, 59(1), 140–145.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Aug 20, 1992
Published online: Dec 1, 1993
Published in print: Dec 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.