Frame Buckling Analysis with Full Consideration of Joint Compatibilities
Publication: Journal of Engineering Mechanics
Volume 118, Issue 5
Abstract
Previous buckling analyses for three‐dimensional frames based on discrete element formulations have been criticized for the lack of equilibrium at angled joints in the buckling state. While this problem can be overcome through the introduction of the so‐called semitangential rotations and moments, this approach suffers from the drawback that the semitangential definitions are rather artificial. In this paper, it is demonstrated that the so‐called lack of equilibrium for rotated angled joints is not a physical reality, but a result of overlooking compatibility conditions for interconnected elements in the deformed position. One feature of such compatibility conditions is that they are irrelevant to any elastic deformations. In a finite element formulation, they can only be included through the external virtual work terms. In this paper, the procedure for calculating the element forces in a step‐by‐step nonlinear analysis is also discussed. The adequacy of the present approach is confirmed in the numerical study.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Argyris, J. H., Hilbert, O., Malejannakis, G. A., and Scharpf, D. W. (1979). “On the geometrical stiffness of a beam in space—A consistent v.w. approach.” Comput. Methods Appl. Mech. Engrg., 20, 105–131.
2.
Bathe, K. J., Ramm, E., and Wilson, E. L. (1975). “Finite element formulation for large deformation dynamic analysis.” Int. J. Numer. Methods Engrg., 9, 353–8.
3.
Elias, Z. M. (1986). Theory and methods of structural analysis. John Wiley & Sons, New York, N.Y.
4.
Leu, L. J., and Yang, Y. B. (1990). “Effects of rigid body and stretching on nonlinear analyses of trusses.” J. Struct. Engrg., ASCE, 116(10), 2582–2598.
5.
Malvern, L. E. (1969). Introduction to the mechanics of a continuum medium. Prentice‐Hall, Englewood Cliffs, N.J.
6.
Reissner, E. (1973). “On one‐dimensional large‐displacement finite‐strain beam theory.” Studies in applied mathematics, 52(2), MIT, Cambridge, Mass.
7.
Simo, J. C., and Vu‐Quoc, L. (1986). “A three‐dimensional finite‐strain rod model. Part II: Computational aspects.” Comput. Methods Appl. Mech. Engrg., 58, 79–115.
8.
Yang, Y. B. (1984). “Linear and nonlinear analysis of space frames with nonuniform torsion using interactive computer graphics,” thesis presented to Cornell Univ., at Ithaca, N.Y., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
9.
Yang, Y. B., and Chiou, H. T. (1987). “Rigid body motion test for nonlinear analysis with beam elements.” J. Engrg. Mech., ASCE, 113(9), 1404–1419.
10.
Yang, Y. B., and Kuo, S. R. (1991). “Consistent frame buckling analysis by finite element method.” J. Struct. Engrg., ASCE, 117(4), 1053–1069.
11.
Yang, Y. B., Kuo, S. R., and Cherng, Y. D. (1989). “Curved beam elements for nonlinear analysis.” J. Engrg. Mech., ASCE, 115(4), 840–855.
12.
Yang, Y. B., and McGuire, W. (1986a). “Stiffness matrix for geometric nonlinear analysis.” J. Struct. Engrg., ASCE, 112(4), 853–877.
13.
Yang, Y. B., and McGuire, W. (1986b). “Joint rotation and geometric nonlinear analysis.” J. Struct. Engrg., ASCE, 112(4), 879–905.
14.
Yang, Y. B., and Shieh, M. S. (1990). “Solution method for nonlinear problems with multiple critical points.” AIAA J., 28(12), 2110–2116.
15.
Yang, Y. B., and Shue, C. C. (1989). “Theory of stability for framed structures—Nonconservative systems.” Proc. Nat. Science Council, Part A; Physical Science and Engrg., Taipei, Taiwan, R.O.C., 13(4), 202–210.
16.
Ziegler, H. (1977). Principles of structural stability. 2d Ed., Birkhauser Verlag Basel, Stuttgart, Germany.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: May 1, 1992
Published in print: May 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.