Load‐Space Formulation for Time‐Dependent Structural Reliability
Publication: Journal of Engineering Mechanics
Volume 118, Issue 5
Abstract
A Monte Carlo procedure for reliability estimation of structural systems, subject to multiparameter time‐varying loading and formulated in the space of the load processes, is described. For most realistic reliability problems, this space is of low order, significantly simplifying the required multidimensional integration. The structural resistance is considered to be time‐ and structural‐behavior‐invariant, and is described only in terms of time‐independent, random‐variable strength parameters. The integration to obtain both the outcrossing rate and the zero‐time failure probability is performed using directional simulation of a general type. Example applications are given for loadings modeled as continuous Gaussian processes and for a two‐bay, rigid‐plastic, portal frame structure. Both completely dependent member resistances and member resistances having a given correlation structure are considered. The effect of changes in member strength variance on zero‐time failure probability and outcrossing rate is described. The rate of convergence of the simulation results is noted.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bolotin, V. V. (1981). Wahrscheinlichkeitsmethoden zur Berechnung von Konstruktionen. VEB Verlag fuer Bauwesen, Berlin, Germany (in German).
2.
Chen, Y. M., Schueller, G. I., and Bourgund, U. (1988). “Reliability of large structural systems under time varying loads.” Probabilistic Methods in Civ. Engrg., P.‐T. D. Spanos, Ed., ASCE, New York, N.Y., 420–423.
3.
Corotis, R. B., and Nafday, A. M. (1989). “Structural system reliability using linear programming and simulation.” J. Struct. Engrg., ASCE, 115(10), 2435–2447.
4.
Ditlevsen, O. (1983). “Gaussian outcrossings from safe convex polyhedrons.” J. Engrg. Mech., ASCE, 109(1), 127–148.
5.
Ditlevsen, O., and Bjerager, P. (1986). “Methods of structural systems reliability.” Struct. Safety, 3(3/4), 195–229.
6.
Ditlevsen, O., Bjerager, P., Olsen, R., and Hasofer, A. M. (1988). “Directional simulation in Gaussian processes.” Probabilistic Engrg. Mech., 3(4), 207–217.
7.
Ditlevsen, O., Melchers, R. E., and Gluver, H. (1989). “General multi‐dimensional probability integration by directional simulation.” DCAMM Report No. 392, Tech. Univ. of Denmark, Lyngby, Denmark.
8.
Lin, T. S., and Corotis, R. B. (1985). “Reliability of ductile systems with random strengths.” J. Struct. Engrg., ASCE, 111(6), 1306–1325.
9.
Madsen, H. O., and Zadeh, M. (1987). “Reliability of plates under combined loading.” Proc. Marine Struct. Reliability Symp., Society of Naval Architects and Marine Engineers, 185–191.
10.
Melchers, R. E. (1987). Structural reliability analysis and prediction. Ellis Horwood/John Wiley and Sons, Chichester, England.
11.
Melchers, R. E. (1989). “Load space formulation for structural reliability calculation.” Research Report No. 044.11.1989, Dept. of Civ. Engrg. and Surveying. Univ. of Newcastle, New South Wales, Australia.
12.
Melchers, R. E. (1990). “Radial importance sampling for structural reliability.” J. Engrg. Mech., ASCE, 116(1), 189–203.
13.
Schwarz, R. F. (1980). “Beitrag zur Bestimmung der Zuverlassigheit nicht linearer Strukturen unter Berucksichtigung kombinierter Stochastischer Einwirkungen,” doctoral thesis, Technical University, Munich, Germany.
14.
Wen, Y. K. (1977). “Statistical combination of extreme loads.” J. Struct. Div., ASCE, 103(5), 1079–1093.
15.
Wen, Y. K., and Chen, H. C. (1986). “System reliability under multiple hazards.” Report No. 526, Structural Research Series, Dept. of Civ. Engrg., Univ. of Illinois, Urbana, Ill.
16.
Wen, Y. K., and Chen, H. C. (1987). “On fast integration for time variant structural reliability.” Probabilistic Engrg. Mech., 2(3), 156–162.
17.
Wen, Y. K., and Chen, H. C. (1989). “System reliability under time varying loads: I.” J. Engrg. Mech., ASCE, 115(4), 8089–823.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 118 • Issue 5 • May 1992
Pages: 853 - 870
Copyright
Copyright © 1992 ASCE.
History
Published online: May 1, 1992
Published in print: May 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.