Critical Review of Thin‐Plate Stability Equations
Publication: Journal of Engineering Mechanics
Volume 118, Issue 3
Abstract
The formulation of the stability equations for continuously supported thin plates is reexamined. It is shown that the middle‐surface stress changes due to bending must be taken into account in a correct uncoupling of the equilibrium equations. The apparent absence of these stress changes in the final linear stability equations is shown to be a consequence of a little‐known orthogonality condition between the middle‐surface stresses in the plane configuration of the plate and the stress changes due to bending. With the knowledge of this orthogonality condition, previous inextensional arguments used in connection with plate stability are reassessed. A weighted‐integral approach is outlined for the stability of supported rectangular plates with generally distributed edge loadings. This is used to show practically how the stress changes associated with buckling can be determined from the linear eigenvalue solution without the need for further integration.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bauer, L., and Riess, E. L. (1965). “Non‐linear buckling of rectangular plates.” J. Society of Industrial and Applied Math, 13(3), 603–626.
2.
Berger, M. S. (1967). “On von Karman's equations and the buckling of a thin elastic plate. I: The Clamped plate.” Communications on pure and Applied Mathematics, XX(4), 687–719.
3.
Brush, D. O., and Almroth, B. O. (1975). Buckling of bars, plates and shells, McGraw‐Hill Book Co., Inc., New York, N.Y.
4.
Friedrichs, K. O., and Stoker, J. J. (1941). “The non‐linear boundary value problem of the buckled plate.” American J. Math, 63(4), 839–888.
5.
Hopkins, H. G. (1949). “Elastic stability of infinite strips.” Proc., Cambridge Philosophical Society, Cambridge, England, 45(IV), 587–594.
6.
Khan, M. Z., and Walker, A. C. (1972). “Buckling of plates subjected to localized edge loading.” The Struct. Engr., London, England, 50(6), 225–232.
7.
Legget, D. M. A. (1937). “The effect of two isolation forces on the elastic stability of a flat rectangular plate.” Proc., Cambridge philosophical Society, Cambridge, England, 33(III), 325–339.
8.
Timoshenko, S. P., and Gere, J. M. (1961).Theory of elastic stability, 2nd Ed., McGraw‐Hill Book Co., Inc., New York, N.Y., 387–389.
9.
von Kármán, T. (1910). “Festigkeits Probleme in Maschinenbau.” Encyklopadie der Mathematischen Wissenschaften, BG Teubner, Leipzig, Germany, IV, 311–385.
10.
Washizu, K. (1975). Variational methods in elasticity and plasticity. Pergamon Press, London, England.
11.
Yamaki, N. (1953a). “Buckling of a rectangular plate under locally distributed forces applied to the opposite edges.” Report 1, Institute of High Speed Mechanics, Tokyo University, Japan, 3(26), 71–98.
12.
Yamaki, N. (1953b). “Buckling of a rectangular plate under locally distributed forces applied to the opposite edges.” Report 2, Institute of High Speed Mechanics, Tokyo University, Japan, 3(27), 89–98.
13.
Yamaki, N. (1954). “Buckling of a rectangular plate under locally distributed forces applied to the opposite edges.” Report 3, Institute of High Speed Mechanics, Tokyo University, Japan, 4(34), 55–71.
14.
Yamaki, N. (1955). “Buckling of a rectangular plate under locally distributed forces applied to the opposite edges.” Report 4, Institute of High Speed Mechanics, Tokyo University, Japan, 5(48), 159–174.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Mar 1, 1992
Published in print: Mar 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.