Time‐Delay Compensation in Active Damping of Stuctures
Publication: Journal of Engineering Mechanics
Volume 117, Issue 11
Abstract
With the higher modes being considered in structural vibration control, practical problems such as the effect of the time delay between sensing the structural motion and applying the control force become more pronounced. Instability due to time delay is observed experimentally using a carefully calibrated model of a typical single‐span bridge modeled as a continuous system. The control action is applied using an accelerometer, analog integrator, cable, post, and hydraulic actuator in conjunction with an on‐line digital microcomputer. A practical scheme for time‐delay compensation based on response sampling, curve fitting, and extrapolation is employed. The purposed scheme has the advantage of eliminating the observation spillover that may cause instability in the control system on one hand, and may serve as an almost perfect state estimator on the other hand. The correlation between the analytical and experimental results is presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abdel‐Mooty, M., and Roorda, J. (1991). “Free vibrations of continuous beams with singularities in inertia and stiffness distribution.” Dyn. Stab. Syst., 6(1), 1–16.
2.
Abdel‐Rohman, M. (1985). “Structural control considering time delay effect.” Trans. Can. Soc. Mech. Eng., 9(4), 224–227.
3.
Abdel‐Rohman, M. (1986). “Active control of distributed parameter structures by pointwise control actions.” Dynamic response of structures G. C. Hart, and R. B. Nelson, eds., ASCE, New York, N.Y., 756–763.
4.
Abdel‐Rohman, M. (1987). “Time‐delay effects on actively damped structures.” J. Engrg. Mech., ASCE, 113(11), 1709–1719.
5.
Balas, M. J. (1979). “Direct velocity feedback control of large space structures.” J. Guidance and Control, 2(3), 252–253.
6.
Basharkha, M. A., and Yao, J. T. P. (1984). “Reliability aspects of structural control.” Civ. Eng. Syst., 1, Jun., 224–229.
7.
Camotim, D., and Roorda, J. (1983). “Active vibration control of a simple beam.” Trans. Can. Soc. Mech. Eng., 7(4), 184–189.
8.
Chung, L. L., Reinhorn, A. M., and Soong, T. T. (1986). “An experimental study of active structural control.” Dynamic response of structures, C. Hart, and R. B. Nelson, eds., ASCE New York, N.Y., 795–802.
9.
Chung, L. L., Reinhorn, A. M., and Soong, T. T. (1988a). “Experiments on active control of seismic structures.” J. Engrg. Mech., ASCE, 114(2), 241–256.
10.
Chung, L. L., Lin, R. C., Soong, T. T., and Reinhorn, A. M. (1988b). “Experimental study of active control of MDOF structures under seismic excitations.” Report No. NCEER‐88‐0025, State Univ. of New York at Buffalo, Buffalo, N.Y.
11.
Chung, L. L., Lin, R. C., Soong, T. T., and Reinhorn, A. M. (1989). “Experimental study of active control for MDOF seismic structures.” J. Engrg. Mech., ASCE, 115(8), 1609–1627.
12.
Hammarstrom, L. G., and Gros, K. S. (1980). “Adaptation of optimal control theory to systems with time delay.” Int. J. Control, 32(2), 329–357.
13.
McGreevy, S., Soong, T. T., and Reinhorn, A. M. (1988). “An experimental study of time delay compensation in active structural control.” Proc. 6th Int. Modal Analysis Conf. and Exhibits, Society for Experimental Mechanics, 1733–739.
14.
Ralston, A., and Rabinowitz, P. (1978). A first course in numerical analysis. McGraw‐Hill Book Co., New York, N.Y.
15.
Reinhorn, A. M., and Manolis, G. D. (1985). “Current state of knowledge on structural control.” Shock and Vibration Digest, 17(10), 35–41.
16.
Reinhorn, A. M., and Manolis, G. D. (1989). “Recent advances in structural control.” Shock and Vibration Digest, 21(1), 3–8.
17.
Reinhorn, A. M., Soong, T. T., Lin, R. C., Wang, Y. P., Fukao, Y., Abe, H., and Nakai, M. (1989). “1:4 scale model studies of active tendon systems and active mass dampers for aseismic protection.” Report No. NCEER‐89‐0000, State Univ. of New York at Buffalo, Buffalo, N.Y.
18.
Roorda, J. (1979). “Experiments in feedback control of structures.” Proc. IUTAM Symp. on Struct. Control, International Union of Theoretical and Applied Mechanics, Jun. 4–7, 629–661.
19.
Ross, D. W. (1971). “Controller design for time‐lag systems via a quadratic criterion.” IEEE Trans. Autom. Control, AC‐16, (6), 664–672.
20.
Soong, T. T. (1988). “Active structural control in civil engineering.” Engrg. Struct., 10, Apr., 74–84.
21.
Soong, T. T., Reinhorn, A. M., and Yang, J. N. (1987). “A standardized model for structural control experiments and some experimental results.” Structural control, H. H. E. Leipholz, ed., Martinus Nijhoff, Amsterdam, the Netherlands, 669–693.
22.
Soong, T. T., and Skinner, G. T. (1981). “Experimental study of active structural control.” J. Engrg. Mech. Div., ASCE, 107(6), 1057–1067.
23.
Yao, J. T. P. (1972). “Concept of structural control.” J. Struct. Div., ASCE, 98, 1567–1574.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Nov 1, 1991
Published in print: Nov 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.