Coupled Temperature/Capillary Potential Variations in Unsaturated Soil
Publication: Journal of Engineering Mechanics
Volume 117, Issue 11
Abstract
A new form of a capillary potential/temperature formulation of heat and mass transfer in unsaturated soil is presented. Moisture transfer in both the vapor and liquid phases and heat transfer by means of conduction and latent heat of vaporization effects are accommodated in a one‐dimensional approach. A numerical solution of the complete formulation is then developed, based on the use of the finite‐element method, to describe spatial variations and a finite‐difference time‐stepping scheme to model transient behavior. The application of the model is then presented, making use of material parameters that have been independently established for all the soil properties specified in the formulation. A comprehensive, consistent approach is therefore claimed to be proposed. The results obtained are shown to be qualitatively correct throughout, conforming with physically realistic behavior. For a number of aspects of the work, it proved possible to examine precisely the validity of the results achieved, and in all those cases the model was found to be valid. Comparisons of the solutions with those obtained from other numerical approaches yield excellent correlations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alonso, E. E., Gens, A., and Hight, D. W. (1987). “Special problem soils—general report (session 5).” Proc., 9th European Conf. on Soil Mech. and Found. Engrg., E. T. Hanrahan, T. L. L. Orr, and T. F. Widdis, eds., Dublin, Ireland, 3, 1087–1146.
2.
Booker, J. R., and Saavidou, C. (1985). “Consolidation around a point heat source.” Int. J. Num. and Anal. Methods Geomech., 9(2), 173–184.
3.
Carslaw, H. S., and Jaeger, J. C. (1959). Conduction of heat in solids. Oxford University Press, Oxford, England.
4.
Cheung, S. C. H., and Gray, M. N. (1990). “Coupled flow of heat and mass in clay materials and its significance to barrier performance.” Proc., Annual Conf. of the Canadian Society for Civ. Engrg., Engineering in our environment, Supplementary Volume, Ground Water and Engineering Materials, Canadian Society for Civ. Engrg. Hamiltan, Canada. 18–27.
5.
Comini, G., and Lewis, R. W. (1976). “A numerical solution of two‐dimensional problems involving heat and mass transfer.” Int. J. of Heat and Mass Transfer, 19(12), 1387–1392.
6.
de Vries, D. A. (1958). “Simultaneous transfer of heat and moisture in porous media.” Trans. American Geophys. Union, 39(5), 909–916.
7.
de Vries, D. A. (1966). Physics of plant environment, 2nd Ed., North Holland Publishing Company, Amsterdam, The Netherlands.
8.
Edlefsen, N. E., and Anderson, A. B. C. (1943). “Thermodynamics of soil moisture.” Hilgardia, 15(2), 31–298.
9.
Ewen, J., and Thomas, H. R. (1989). “Heating unsaturated medium sand.” Geotechnique, London, England, 39(3), 455–470.
10.
Gaudu, R., and Bacon, G. (1979). “Numerical simulation of heat and mass transfer in unsaturated porous media.” Proc., 1st. Int. Conf. on Num. Methods in Thermal Problems, Swansea, Wales, 1122–1130.
11.
Hueckel, T., and Pellegrini, R. (1989). “Modelling of thermal failure of saturated clays.” Proc., 3rd Int. Symp. on Num. Models in Geomech., Niagara Falls, Canada, Elsevier Applied Science, London, England, 81–90.
12.
Kaye, G. W. C., and Laby, T. M. (1973). Tables of physical and chemical constants, 14th Ed., Longman, Harlow, England.
13.
Lewis, R. W., Majorana, C. E., and Schrefler, B. A. (1986). “A coupled finite element model for the consolidation of non‐isothermal elastoplastic porous media.” Transport in Porous Media, 1(2), 155–178.
14.
Neerdeal, B., Voet, M., Meynendonckx, P., Dardaine, M., Gatabin, C., and Plas, F. (1989). “The Bacchus experiment at the Hades underground research facility at Mol, Belgium.” NEA/CEC Workshop on Sealing of radiaoctive waste repositories, Braunschweig, Germany.
15.
Philip, J. R., and de Vries, D. A. (1957). “Moisture movement in porous materials under temperature gradients.” Trans. American Geophysical Union, 38(2), 222–232.
16.
Preece, R. J. (1975). “The measurement and calculation of physical properties of cable bedding sands. Part 2: specific thermal capacity, thermal conductivity and temperature ratio across ‘air’ filled pores.” C.E.G.B. Laboratory Note No. RD/L/N 231/74, Leatherhead, England.
17.
Thomas, H. R., Morgan, K., and Lewis, R. W. (1980). “A fully non‐linear analysis of heat and mass transfer problems in porous bodies.” Int. J. for Num. Methods in Engrg., 15(9), 1381–1393.
18.
Thomas, H. R. (1987). “Non‐linear analysis of heat and moisture transfer in unsaturated soils.” J. Engrg. Mech., ASCE, 113(8), 1163–1180.
19.
Thomas, H. R., and Li, C. L. W. (1991). “Parallel computing solution of coupled flow processes in soil.” J. Computing in Civ. Engrg., 5(4), 428–443.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 117 • Issue 11 • November 1991
Pages: 2475 - 2491
Copyright
Copyright © 1991 ASCE.
History
Published online: Nov 1, 1991
Published in print: Nov 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.