Nonlocal Microplane Model for Fracture, Damage, and Size Effect in Structures
Publication: Journal of Engineering Mechanics
Volume 116, Issue 11
Abstract
A generalized microplane model, which was previously developed to describe tensile cracking and nonlinear triaxial response of brittle‐plastic materials in compression and shear, is implemented in a finite element code. To limit localization instabilities due to strain softening and the consequent spurious mesh‐sensitivity, the recently proposed concept of nonlocal continuum with local strain (nonlocal damage) is adopted and combined with the microplane model. An effective numerical algorithm permitting large loading steps is developed by applying the idea of exponential algorithms previously used for creep. Problems due to non‐symmetry of the tangential stiffness matrix are avoided by using the initial elastic stiffness matrix in the incremental force‐displacement relations. Numerical results demonstrate that the microplane model, which previously has allowed an excellent description of the test data on nonlinear triaxial behavior of concrete as well as unidirectional and multidirectional crack or crack shear, is endowed (in its nonlocal generalization) with the capability of also modeling tensile fracture. The model yields the correct transitional size effect observed in concrete and agrees with the recently proposed size effect law. The formulation is applicable to brittle‐plastic materials in general.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bant, Z. P. (1971). “Numerically stable algorithm with increasing time steps for integral‐type aging creep.” Proc. First Int. Conf. on Struct. Mech. in Reactor Tech., West Berlin, W. Germany, T. A. Jaeger, ed., 4, Part H, 119–126.
2.
Bažant, Z. P., and Wu, S. T. (1974). “Rate‐type creep law of aging concrete based on Maxwell Chain.” Matls. and Structs., RILEM, Paris, France, 7 (37), 45–60.
3.
Bažant, Z. P., and Bhat, P. D. (1976). “Endochronic theory of inelasticity and failure of concrete.” J. Engrg. Mech., ASCE, 102(4), 701–722.
4.
Bažant, Z. P. (1976). “Instability, ductility, and size effect in strain‐softening concrete.” J. Engrg. Mech., ASCE, 102(2), 331–334.
5.
Bažant, Z. P., and Kim, S. S. (1979). “Plastic‐fracturing theory for concrete.” J. Engrg. Mech., ASCE, 105(3), 407–428.
6.
Bažant, Z. P., and Oh, B. H. (1983). “Crack band theory for fracture of concrete.” Matls. and Structs., RILEM, Paris, France, 16 (93), 155–177.
7.
Bažant, Z. P. (1984a). “Size effect in blunt fracture: Concrete, rock, metal.” J. Engrg. Mech., ASCE, 110(4), 518–535.
8.
Bažant, Z. P. (1984b). “Microplane model for strain‐controlled inelastic behavior.” Mechanics of Engineering Materials, C. S. Desai and R. H. Gallagher, eds., John Wiley and Sons, New York, N.Y., 45–59.
9.
Bažant, Z. P. (1984c). “Imbricate continuum and its variational derivation.” J. Engrg. Mech., ASCE, 110(12), 1693–1712.
10.
Bažant, Z. P., and Gambarova, P. G. (1984). “Crack shear in concrete: Crack band microplane model.” J. Struct. Engrg., ASCE, 110(9), 2015–2035.
11.
Bažant, Z. P., Belytschko, T. B., and Chang, T. P. (1984). “Continuum model for strain‐softening.” J. Engrg. Mech., ASCE, 110(12), 1666–1692.
12.
Bažant, Z. P. (1986). “Mechanics of distributed cracking.” Appl. Mech. Rev., 39(5), 675–705.
13.
Bažant, Z. P., and Oh, B. H. (1985). “Microplane model for progressive fracture of concrete and rock.” J. Engrg. Mech., ASCE, 111(4), 559–582.
14.
Bažant, Z. P., and Chern, J. C. (1985). “Strain‐softening with creep and exponential algorithm.” J. Engrg. Mech., ASCE, 111(3), 381–390.
15.
Bažant, Z. P., and Oh, B. H. (1986). “Efficient numerical integration on the surface of a sphere.” Zeitschrift für Angewandte Mathematik und Mechanik (ZAMM), 66 (1), 37–49.
16.
Bažant, Z. P., and Pfeiffer, P. A. (1987). “Determination of fracture energy from size effect and brittleness number.” ACI Matls. J., 84(Nov.), 463–480.
17.
Bažant, Z. P., and Pijaudier‐Cabot, G. (1987). “Modeling of distributed damage by nonlocal continuum with local strain.” Preprints, Fourth Int. Conf. on Numerical Methods in Fracture Mech., San Antonio, Tex., Mar., Pineridge Press, Swansea, United Kingdom, A. R. Luxmore et al., eds., 411–432.
18.
Bažant, Z. P., and Lin, F.‐B., (1988a). “Nonlocal smeared cracking model for concrete fracture.” J. Struct. Engrg., 114(11), 2493–2510.
19.
Bažant, Z. P., and Lin, F.‐B. (1988b). “Nonlocal yield‐limit degradation.” Int. J. Num. Methods Engrg., 26, 1805–1823.
20.
Bažant, Z. P., and Pijaudier‐Cabot, G. (1988). “Nonlocal continuum damage, localization instability and convergence.” ASME J. Appl. Mech., 55, 287–293.
21.
Bažant, Z. P., and Prat, P. C. (1988). “Microplane model for brittle plastic material: I. Theory, II. Verification.” J. Engrg. Mech., ASCE, 114, 1672–1702.
22.
Bažant, Z. P. (1988a). “Stable states and paths of structures with plasticity or damage.” J. Engrg. Mech., ASCE, 114(12), 2013–2034.
23.
Bant, Z. P. (1988b). “Stable states and stable paths of propagation of damage zones and interactive fractures in cracking and damage.” Proc., France‐US Workshop, ENS, Cachan, France, Sep., J. Mazars and Z. P. Bažant, eds., Elsevier, London, United Kingdom, 183–206.
24.
Bant, Z. P., and Belytschko, T. (1988). “Strain‐softening continuum damage: Localization and size effect,” Proc. Second Int. Conf. on Constitutive Laws of Engrg. Matls.: Theory and Applications, Tucson, Ariz., Jan., C. S. Desai et al., eds., Elsevier, New York, N.Y., 11–33.
25.
Cedolin, L., dei Poli, S., and Iori, I. (1983). “Experimental determination of the fracture process zone in concrete.” Cement and Concr. Res. 13, 557–567.
26.
Chen, A. C. T., and Chen, W. F. (1975). “Constitutive relations for concrete.” J. Engrg. Mech., ASCE, 101(4), 465–481.
27.
Dougill, J. W. (1976). “Unstable progressively fracturing solids.” J. Appl. Math. and Physics (ZAMP), 27, 423–436.
28.
Eringen, A. C., and Edelen, D. G. D. (1972). “On nonlocal elasticity.” Int. J. Engrg. Sci., 10, 233–248.4.
29.
Gerstle, K. H., et al. (1980). “Behavior of concrete under multi‐axial stress states.” J. Engrg. Mech., ASCE, 106(6), 1383–1403.
30.
Gerstle, K. H. (1981). “Simple formulation of biaxial concrete behavior.” ACI J., 78(1), 62–68.
31.
Kröner, E. (1968). “Interrelations between various branches of continuum mechanics.” Mechanics of Generalized Continua, E. Klörner, ed., Springer, W. Berlin, W. Germany, 330–340.
32.
Krumhansl, J. A. (1968). “Some considerations of the relations between solid state physics and generalized continuum mechanics.” Mechanics of Generalized Continua, E. Kröner, eds., Springer, W. Berlin, W. Germany, 298–331.
33.
Levin, V. M. (1971). “The relation between mathematical expectation of stress and strain tensors in elastic microheterogenous media.” Prikl. Mat. Mekh., 35, 694–901 (in Russian).
34.
Lin, F. P., et al. (1987). “Concrete model with normality and sequential identification.” Computer and Struct., 26(6), 1011–1026.
35.
Ortiz, M. A. (1985). “A constitutive theory for the inelastic behavior of concrete.” Mech. and Math., 4, 67–93.
36.
Pande, G. H., and Xiong, W. (1982). “An improved multi‐laminate model of jointed rock masses.” Proc. First Int. Symp. Numerical Models in Geomech., Balkema, Rotterdam, the Netherlands, 218–226.
37.
Pijaudier‐Cabot, G., and Bant, Z. P. (1987). “Nonlocal damage theory.” J. Engrg. Mech., ASCE, 113, 1512–1533.
38.
Stroud, A. H. (1971). Approximate calculation of multiple integrals. Prentice‐Hall, Englewood Cliffs, N.J., 296–302.
39.
Taylor, G. I. (1938). “Plastic strain in metals.” J. Inst. Metals, 62, 307–324.
40.
Taylor, R. L., Pister, K. S., and Goudreau, G. L. (1970). “Thermo‐mechanical analysis of visco‐elastic solids.” Int. J. Num. Methods Engrg., 2, 45–60.
41.
Willam, K. J., and Warnke, E. P. (1974). “Constitutive model for the triaxial behavior of concrete.” Seminar on Concrete Structures Subjected to Triaxial Stresses, Int. Assoc. of Bridge and Struct. Engrg. Conf., Bergamo, Italy, May.
42.
Zienkiewicz, O. C., Watson, M., and King, I. P. (1968). “A numerical method of visco‐elastic stress analysis.” Int. J. Mech. Sci., 10, 807–827.
43.
Zienkiewicz, O. C., and Pande, G. N. (1977). “Time‐dependent multi‐laminate model of rocks—A numerical study of deformation and failure of rock masses.” Int. J. Num. Analytical Meth. Geomech., 1, 219–247.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Nov 1, 1990
Published in print: Nov 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.