Asymmetrical Buckling of Prestressed Tapered Arches
Publication: Journal of Engineering Mechanics
Volume 115, Issue 9
Abstract
Prestressed arches with different cross‐sectional forms (tapered and prismatic) are investigated by formulating the problem as a two‐point nonlinear boundary‐value problem. The arches are subjected to a constant live load and the intensity of structural self‐weight is increased to determine symmetric and asymmetric limit loads, bifurcation points and postbuckling equilibrium paths. The investigation uses an algorithm based on a shooting method to solve the system of governing coupled nonlinear differential equations. It is shown that symmetric limit loads of tapered‐out arches with tapering angle and asymmetric limit loads of tapered‐in arches are higher than their equivalent prismatic arches. Also for tapered‐in arches with asymmetric buckling does hot occur with symmetry being the controlling behavior.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chini, S. A. (1986). “Nonlinear stability analysis of prestressed domes using the finite element method,” thesis presented to the University of Maryland, at College Park, Md., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
2.
Chini, S. A., and Wolde‐Tinsae, A. M. (1988a). “Buckling test of prestressed arches in centrifuge.” J. Engrg. Mech., ASCE, 114(6), 1063–1075.
3.
Chini, S. A., and Wolde‐Tinsae, A. M. (1988b). “Critical load and buckling of arch formworks.” J. Engrg. Mech., ASCE, 114(9), 1435–1453.
4.
Chini, S. A., and Wolde‐Tinsae, A. M. (1988c). “Effect of prestressing on elastica arches.” J. of Engrg. Mech., ASCE, 114(10), 1791–1800.
5.
Herzog, T. (1976). Pneumatic structures, a handbook of inflatable architecture. Oxford University Press, New York, N.Y.
6.
Kennedy, J. S., and Aggarwal, A. S. (1971). “Effects of weight on large deflection of arches.” J. Engrg. Mech. Div., ASCE, 97(3), 637–644.
7.
Proc. of the First International Colloquium on Pneumatic Structures (1967). Stuttgart, Germany.
8.
Wolde‐Tinsae, A. M. (1986). “Prebuckled sandwich domes and superdomes.” International Symp. on Membrane Structures and Space Frames, Osaka, Japan, 345–352.
9.
Wolde‐Tinsae, A. M., and Assaad, M. C. (1984). “Nonlinear stability of prebuckled tapered arches.” J. Engrg. Mech., ASCE, 110(1), 84–94.
10.
Wolde‐Tinsae, A. M., and Huddleston, J. V. (1977). “Three‐dimensional stability of prestressed arches.” J. Engrg. Mech., ASCE, 103(5), 855–867.
11.
Wolde‐Tinsae, A. M., and Huddleston, J. V. (1981). “Nonlinear three‐dimensional analysis of prebuckled domes.” Int. J. Comp. and Struct., 14(3–4), 215–228.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: Sep 1, 1989
Published in print: Sep 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.