Sea‐Ice Indentation in Creeping Mode
Publication: Journal of Engineering Mechanics
Volume 113, Issue 7
Abstract
A finite element method of analysis is developed and applied to the study of global and local pressures generated on a cylindrical indenter during sea‐ice deformations in the creeping mode. Numerical simulations are performed under plane stress conditions to assess the influence of interface adfreeze and friction, material constants for a multiaxial power‐law creep model, indenter diameter, and ice‐sheet velocity on predicted pressures. The results are compared with those based on approximate methods of analysis. Stress, strain rate, and strain contours are obtained in addition to the distribution of interface pressures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Baligh, M. M. (1984). “The strain path method.” Res. Rep. R84‐01, No. 761, Dept. of Civ. Engrg., M.I.T., Cambridge, Mass., Jan., 47 pp.
2.
Bruen, F. J., and Vivatrat, V. (1984). “Ice force prediction based on strain‐rate field.” Third Int. Symp. on Offshore Mech. and Arctic Engrg., New Orleans, La., 7 pp.
3.
Bruen, F. J., et al. (1982). “Selection of local design ice pressures for Arctic systems.” Offshore Technology Conf., Paper OTC 4334, 417–435.
4.
Croasdale, K. R., Morgenstern, M. R., and Nuttall, J. B. (1977). “Indentation tests to investigate ice pressures on vertical piers.” J. Glaciology, 19(81), 310–312.
5.
Frederking, R., and Gold, L. W. (1975). “Experimental study of edge loading of ice plates.” Can. Geotech. J., 12(4), 456–463.
6.
Gershunov, E. M. (1984). “Shear strength of adfreeze bond and its effect on global ice load applied to mobile offshore drilling units under Arctic conditions.” Offshore Technology Conf., Paper OTC 4687, 357–362.
7.
Glen, J. W. (1955). “The creep of polycrystalline ice.” Proc. Roy. Soc. London, Ser. A, 228(1175), 519–538.
8.
Haynes, F. D. (1973). “Tensile strength of ice under triaxial stresses.” USA CRREL Res. Rep. 312, 21 pp.
9.
Hughes, T. J. R., and Taylor, R. L. (1978). “Unconditionally stable algorithms for quasi‐static elasto/visco‐plastic finite element analysis.” Comput. and Structs., 8, 169–173.
10.
Krieg, R. D. (1977). “Numerical integration of some new unified plasticity‐creep formulations.” SMIRT‐4, M6/4.
11.
Michel, S., and Toussaint, N. (1977). “Mechanisms and theory of indentation of ice plates.” J. Glaciology, 19(81), 285–300.
12.
Oksanen, P. (1981). “Friction and adhesion of ice.” IAHR Ice Symp., Quebec, Canada, 628–640.
13.
Palmer, A. C. (1967). “Creep‐velocity bounds and glacier‐flow problems.” J. Glaciology, 6(46), 479–488.
14.
Ponter, A. R. S., et al. (1983). “The force exerted by a moving ice sheet on an offshore structure: part I the creep mode.” Cold Reg. Sci. and Tech., 8, 109–118.
15.
Ralston, T. D. (1978). “An analysis of ice sheet indentation.” IAHR Ice Symp., Lulea, Sweden, 13–31.
16.
Sanderson, T. J. O. (1984). “Theoretical and measured ice forces on wide structures.” Proc. 7th Int. Symp. on Ice, IAHR, Hamburg, Germany, 32 pp.
17.
Shyam Sunder, S., and Ting, S.‐K. (1985). “Ductile to brittle transition in sea ice under uniaxial loading.” Proc. of the 8th Int. Conf. on Port and Ocean Engrg. under Arctic Conditions, Narssarssuaq, Greenland, Sep., 12 pp.
18.
Snyder, M. D., and Bathe, K. J. (1981). “A solution procedure for thermo‐elastic‐plastic and creep problems.” Nucl. Engrg. and Des., 64, 49–80.
19.
Ting, S.‐K., and Shyam Sunder, S. (1985). “Sea ice indentation accounting for strain‐rate variation.” Proc. of the ASCE Specialty Conf.: Arctic '85—Civ. Engrg. in the Arctic Offshore, San Francisco, Calif., Mar., 11 pp.
20.
Vivatrat, V., and Chen, V. L. (1985). “Ice load prediction with the use of a rate‐dependent anisotropic constitutive law.” Proc. ASCE Specialty Conf.: Arctic '85—Civ. Engrg. in the Arctic Offshore, San Francisco, Calif., Mar., 11 pp.
21.
Wang, Y. S. (1982). “A rate‐dependent stress‐strain relationship for sea ice.” First Int. Symp. on Offshore Mech. and Arctic Engrg., New Orleans, La., 243–248.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Jul 1, 1987
Published in print: Jul 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.