A Thermoplastic BEM Analysis for Substructured Axisymmetric Bodies
Publication: Journal of Engineering Mechanics
Volume 113, Issue 12
Abstract
A boundary element formulation for thermoplastic analysis of axisymmetric bodies subjected to axisymmetric loads is developed. This formulation is implemented in a multiregion system that utilizes quadratic isoparametric shape functions to model the geometry and field variables of the boundary and domain of a body. The kernel functions are presented in an appendix and the singularities associated with these kernels are discussed. New techniques are described to calculate the coefficients associated with the singular nodes. An iterative procedure known as the initial stress algorithm is adopted for the incremental thermoplastic analysis. An advanced implementation of the algorithm includes a time‐saving feature which reduces the number of iterations needed for convergence by utilizing the past history of initial stress rates to estimate the values of the initial stress rates of the next load increment.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bakr, A. A., and Fenner, R. T. (1983). “Boundary integral equation analysis of axisymmetric thermoelastic problems.” J. Strain Analysis, 18(4), 239–251.
2.
Banerjee, P. K., and Butterfield, R. (1981). Boundary element methods in engineering science, McGraw‐Hill Book Co., London, England.
3.
Banerjee, P. K., and Raveendra, S. T. (1986). “Advanced boundary element analysis of two and three‐dimensional problems of elastoplasticity.” Internat. J. Num. Methods in Engrg., 23(6), 985–1002.
4.
Boley, B. A., and Weiner, J. H. (1960). Theory of thermal stresses. John Wiley and Sons, New York, N.Y.
5.
Cathie, D. N., and Banerjee, P. K. (1980). “Boundary element methods for axisymmetric plasticity.” Innovative numerical methods for the applied engineering science, R. P. Shaw, W. Pilkey, B. Pilkey, R. Wilson, Al. Lakis, A. Chaudovet, and C. Marino, eds., University of Virginia Press.
6.
Cruse, T. A. (1974). “An improved boundary integral equation method for three‐dimensional elastic stress analysis.” Internat. J. Computers and Struct., 4(4), 741–757.
7.
Cruse, T. A., Snow, D. W., and Wilson, R. B. (1977). “Numerical solutions in axisymmetric elasticity.” Computers and Struct., 7(3), 445–451.
8.
Dinno, K. S., and Gill, S. S. (1965). “An experimental investigation into the plastic behavior of flush nozzles in spherical pressure vessels.” Internat. J. Mech. Sci., 7(12), 817–839.
9.
Henry, D. P., Pape, D. A., and Banerjee, P. K. (1987). “New axisymmetric BEM formulation for body forces using particular integrals.” J. Engrg. Mech., ASCE, 113(5), 671–688.
10.
Hill, R. (1950). The mathematical theory of plasticity. Oxford University Press, London, England.
11.
Kermanidis, T. (1975). “A numerical solution for axially symmetrical elasticity problems.” Internat. J. Solids and Struct., 11(4), 493–500.
12.
Nigam, R. K. (1979). “The boundary integral equation method for electrostatic problems involving axisymmetric geometry and arbitrary boundary,” thesis presented to the University of Kentucky, at Lexington, Ky., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
13.
Sarihan, V., and Mukherjee, S. (1982) “Axisymmetric viscoplastic deformation by the boundary element method.” Internat. J. Solids and Struct., 18(12), 1113–1128.
14.
Swedlow, J. L., and Cruse, T. A. (1971). “Formulation of boundary integral equations for three‐dimensional elastoplastic flow.” Internat. J. Solids and Struct., 7(12), 1673–1683.
15.
Zienkiewicz, O. C. (1977). The Finite element method. McGraw‐Hill, Book Co., London, England.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Dec 1, 1987
Published in print: Dec 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.