Traction Boundary Conditions for Shell Elements
Publication: Journal of Engineering Mechanics
Volume 113, Issue 1
Abstract
Previous authors have reported difficulty in modeling the free warping torsion of slit cylindrical shells using flat triangular shell elements. During the current study it has been determined that the theoretical basis for traction boundary conditions, rigid body motion characteristics of the finite element model, and kinematic mode singularities are all contributing factors to the finite shell element difficulties with the slit cylinder problem. The scope of this paper is concerned with the formal derivation of the thin cylindrical shell traction boundary conditions and their relation to the finite element analysis of the slit cylinder subjected to warping torsion. It is shown that with the foregoing cumbrances resolved, the flat and shallow shell finite elements respond very accurately for cylindrical shell warping problems.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Batoz, J. L., “An Explicit Formulation for an Efficient Triangular Plate‐Bending Element,” International Journal for Numerical Methods in Engineering, Vol. 18, 1982, pp. 1077–1089.
2.
Batoz, J. L., Bathe, K. J., and Ho, L. W., “A Study of Three Node Triangular Plate Bending Elements,” International Journal for Numerical Methods in Engineering, Vol. 15, 1980, pp. 1771–1812.
3.
Belytschko, T. B., et al., “Stress Projection for the Cure of Membrane and Shear Locking in Shell Finite Elements,” Computer Methods in Applied Mechanics and Engineering, Vol. 51, Nos. 1–3, 1985, pp. 221–258.
4.
Carpenter, N. J., Stolarski, H. K., and Belytschko, T. B., “Improvements in 3‐Node Triangular Shell Elements,” International Journal for Numerical Methods in Engineering, Vol. 23, 1986, pp. 1643–1667.
5.
Cook, R. D., Concepts and Applications of Finite Element Analysis, 2nd ed., Wiley, New York, N.Y., 1981.
6.
Dikmen, M., Theory of Thin Elastic Shells, Pitman, New York, N.Y., 1982.
7.
Dym, C. L., Introduction to the theory of Shells, Pergamon, New York, N.Y., 1974.
8.
Flugge, W., Stresses in Shells, Springer‐Verlag, New York, N.Y., 1960.
9.
Gibson, J. E., Linear Elastic Theory of Thin Shells, Pergamon, New York, N.Y., 1965.
10.
Knowles, N. C., Razzaque, A., and Spooner, J. B., “Experience of Finite Element Analysis of Shell Structures,” FETSCM, Cardiff, Wales, Scotland, 1974, pp. 245–262.
11.
Koiter, W. T., The Theory of Thin Elastic Shells, North‐Holland, New York, N.Y., 1960.
12.
Lowe, P. G., and Radok, J. R. M., Thin Shell Theory, P. Noordhoff, Ltd., Groningen, The Netherlands, 1964.
13.
Niordson, F. I., “Theory of Thin Shells,” International Union of Theoretical and Applied Mechanics, Second Symposium, Copenhagen, Denmark, Springer‐Verlag, New York, N.Y., 1967.
14.
Novozhilov, V. V., The Theory of Thin Shells, translated and edited by P. G. Lowe, and J. R. M. Radok, P. Noordhoff, Ltd., Groningen, The Netherlands, 1959.
15.
Pian, T. H. H., “Cylindrical Test Problems,” 26th Structures, Structural Dynamics, and Materials Conference, AIAA/ASME/ASCE/AHS, Orlando, Fla., 1985.
16.
Sanders, J. L., Jr., “Analysis of Circular Cylindrical Shells,” Journal of Applied Mechanics, Vol. 50, 1983, pp. 1165–1170.
17.
Seide, P., Small Elastic Deformations of Thin Shells, Noordhoff, Leyden, The Netherlands, 1975.
18.
Stolarski, H. K., and Belytschko, T. B., “Membrane Locking and Reduced Integration for Curved Elements,” Journal of Applied Mechanics, Vol. 49, 1982, pp. 172–176.
19.
Stolarski, H. K., et al., “A Simple Triangular Curved Shell Element,” Engineering Computations, Vol. 1, 1984, pp. 210–218.
20.
Stolarski, H. K., et al., “A Simple Triangular Curved Shell Element for Collapse Analysis,” Collapse Analysis of Structures, L. J. Sobel and K. Thomas, Eds., ASME, Vol. 84, 1984, pp. 101–122.
21.
Timoshenko, S., and Woinowsky‐Krieger, S., Theory of Plates and Shells, 2nd ed., McGraw‐Hill, New York, N.Y., 1959.
22.
Ugural, A. C., Stresses in Plates and Shells, McGraw‐Hill, New York, N.Y., 1981.
23.
Weaver, W., Jr., and Johnston, P. R., Finite Elements for Structural Analysis, Prentice‐Hall, Englewood Cliffs, N.J., 1984.
24.
Zienkiewicz, O. C., The Finite Element Method, 3rd ed., McGraw‐Hill, New York, N.Y., 1977.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Jan 1, 1987
Published in print: Jan 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.