Stress Analysis of a Blunted Notch in a Clamped Edge
Publication: Journal of Engineering Mechanics
Volume 112, Issue 2
Abstract
A formula for the stress concentration of a rounded notch cut in a clamped edge is derived. In this investigation a notched semi‐infinite plate is subjected to two situations: Uniform tension and uniform shear. The notch has a rounded corner at the end. It is shown that the maximum stress at the tip of a rounded corner can be represented by an infinite series expressed in forms of radius of curvature and the order of Williams stress singularity. The approximate expressions which include only the first few terms of an infinite series are compared with the analytical results. A rational mapping function and complex stress functions are used for the analysis of this displacement boundary value problem.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Hasebe, N., “Stress Analysis of the Cross‐Shaped Plate‐Roundness of Corner and its Stress,” Proceedings of the Japan Society of Civil Engineering, No. 185, 1971, pp. 9–20.
2.
Hasebe, N., “Stress Analysis of a Semi‐Infinite Plate with a Triangular Notch or Mound,” Proceedings of the Japan Society of Civil Engineering, No. 194, 1971, pp. 29–40.
3.
Hasebe, N., and Iida, J., “A Crack Originating from a Triangular Notch on a Rim of a Semi‐Infinite Plate,” Engineering Fracture Mechanics, Vol. 10, 1981, pp. 773–782.
4.
Hasebe, N., “Uniform Tension of a Semi‐Infinite Plate with a Crack at an End of a Stiffened Edge,” Ingenieur Archiv, Vol. 48, 1979, pp. 129–141.
5.
Hasebe, N., and Inohara, S., “Stress Analysis of a Semi‐Infinite Plate with an Oblique Edge Crack,” Ingenieur Archiv, Vol. 49, 1980, pp. 51–62.
6.
Hasebe, N., and Ueda, M., “Crack Originating from a Corner of a Square Hole,” Engineering Fracture Mechanics, Vol. 13, 1984, pp. 913–923.
7.
Muskhelishvili, N. I., “Some Basic Problems of Mathematical Theory of Elasticity,” Noordhoff, The Netherlands, 1963.
8.
Nomura, Y., “Plane Stress of the Plate which has Discontinuity Parts (4th Report, The Case of the Cross‐Shaped Plate),” Transactions of the Japan Society of Mechanical Engineers, Vol. 27, No. 179, 1961, pp. 1025–1035.
9.
Okabayashi, M., and Hasebe, N., “An Investigation of the Elastic Stress Distribution near a Corner of a Two Dimensional Body,” Bulletin of Nagoya Institute of Technology, Vol. 23, 1971, pp. 367–375.
10.
Williams, M. L., “Stress Singularities Resulting from Various Boundary Conditions in Angular Corner of Plate in Extention,” Journal of Applied Mechanics, Vol. 19, 1952, pp. 526–528.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: Feb 1, 1986
Published in print: Feb 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.