Wind‐Buckling Approach for RC Cooling Towers
Publication: Journal of Engineering Mechanics
Volume 109, Issue 3
Abstract
The equations of the bending and stability theories for the orthotropic shell are solved using the finite element method (FEM). A biaxial material law for concrete and a nearly bilinear stress‐strain diagram for reinforcing steel were considered. Taking a layered ring element the influence of bending moments together with the membrane forces can be followed under increasing load up to the failure of concrete or steel. At each level the buckling factor can be calculated considering the stress dependent orthotropic buckling stiffness. The method of calculation developed is applied to two large cooling tower shells, one under wind load according to German code DIN 1055 and the other one under unusually high wind pressures, as those considered in the U.S.A. According to the wall thickness taken the buckling load factor drops to half or less of the value obtained assuming a linear elastic behavior. This high reduction is mainly due to orthotropy and the descending tangent modulus near the ultimate load.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Berke, G., and Carlson, R. L., “Experimental Studies of the Postbuckling Behavior of Complete Spherical Shells,” Experimental Mechanics, Vol. 8, Dec., 1968, pp. 548–553.
2.
Cole, P. P., Abel, J. F., and Billington, D. P., “Buckling of Cooling‐Tower Shells: Bifurcation Results,” Journal of the Structural Division, ASCE, Vol. 101, No. ST 6, Proc. Paper 11365, June, 1975, pp. 1205–1222.
3.
Der, T. J., and Fidler, R., “A Model Study of the Buckling Behavior of Hyperbolic Shells,” Proceedings, Institution of Civil Engineers, Vol. 41, Sept., 1968, pp. 105–118.
4.
Kupfer, H., “Das Verhalten des Betons unter zweiaxialer Beanspruchung,” Report No. 78, Lehrstuhl für Massivbau der TH München, München, Federal Republic Germany, 1969.
5.
Link, J., “Eine Formulierung des zweiaxialen Verformungsund Bruchverhaltens von Beton und deren Anwendung auf die wirklichkeitsnahe Berechnung von Stahlbetonplatten,” Schriftenreihe des DAfStb, Heft 270, Wilhelm Ernst & Sohn, Berlin‐München, 1976.
6.
Mungan, I., “Buckling Stress States of Hyperboloidal Shells,” Journal of the Structural Division, ASCE, Vol. 102, No. ST10, Proc. Paper 12465, Oct., 1976, pp. 2005–2020.
7.
Mungan, I., “Buckling Stress States of Shells of Revolution,” Proceedings, World Congress and 20th Anniversary of International Association for Shell and Spatial Structures, Madrid, Spain, Sept., 1979, Vol. 1, pp. 1.49–1.65.
8.
Mungan, I., “Buckling Stresses of Stiffened Hyperboloidal Shells,” Journal of the Structural Division, ASCE, Vol. 105, No. ST8, Proc. Paper 14775, Aug., 1979, pp. 1589–1604.
9.
Mungan, I., “Ein Konzept für die Beulbemessung der Kühlturmschalen aus Stahlbeton,” Beton‐und Stahlbetonbau, Vol. 76, Nr.10, Oct., 1981, pp. 229–233.
10.
Mungan, I., “Experimentelle Beuluntersuchungen und Stabilitätsnachweise für Kühlturmschalten,” Konstruktiver Ingenieurbau Berichte Heft 29/3C, Vulkan‐Verlag, Essen, Germany, 1977, pp. 75–80.
11.
“Recommendations for the Design of Hyperbolic or other Similarly Shaped Cooling Towers,” International Association for Shell and Spatial Structures Working Group Nr. 3, Madrid, Spain, 1979.
12.
Shanley, F. R., “Inelastic Column Theory,” Journal of the Aeronautical Sciences, Vol. 14, 1947, pp. 261–267.
13.
Zerna, W., and Mungan, I., “Buckling Stresses of Shells Having Negative Gaussian Curvature,” in Buckling of Shells, A State‐of‐the Art‐Colloquium, Stuttgart, E. Ramm, ed., Springer‐Verlag, Berlin, Heidelberg, N.Y., 1982, pp. 467–485.
14.
Zerna, W., Mungan, I., and Steffen, W., “Bestimmung der Beulsicherheit von Schalen aus Stahlbeton unter Berücksichtigung von physikalisch‐nichtli‐nearen Materialeigenschaften,” Schriftenreihe des DAfStb, Heft 315, Wilhelm Ernst & Sohn, Berlin‐München, Germany, 1980.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Aug 1, 1983
Published in print: Aug 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.