Simplified Model for the Class-I Settling Tanks Design
Publication: Journal of Environmental Engineering
Volume 131, Issue 12
Abstract
The purpose of this paper is to simplify the original one-dimensional mathematical model that is used to simulate the performance of nonuniform particle sizes in Class-I settling tanks. This paper shows that the modified model is both efficient and economical. The model is capable of providing such information as removal efficiency, particle size distributions in sludge and effluent suspension, and the thickness of bottom sludge. If the desired removal efficiency is provided, a simple equation from the simplified model can be used to calculate the length of the tank. Moreover, the model is quite straightforward and does not require a computer program to obtain results. It deals with only one parameter, the sediment coefficient , which shows great advantages. Here is taken as 1.2 for the Class-I settling tanks, however calibration is still recommended. Effluent information, which is important for further treatment units, can be calculated directly from the simplified model. The simplified model is qualitatively reasonable in comparison with other models.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
This research was supported in part by the Natural Science and Engineering Research Council of Canada.
References
Adams, E. W., and Rodi, W. (1990). “Modeling flow and mixing in sedimentation tanks.” J. Hydraul. Eng., 116(7), 895–913.
Camp, T. R. (1946). “Sedimentation and the design of settling tanks.” ASCE Trans., III, 895–952.
El-Baroudi, H. M. (1969). “Characterization of settling tanks by eddy diffusion.” J. Sanit. Eng. Div., Am. Soc. Civ. Eng., 95(3), 527–544.
Guo, Q. C., and Jin, Y. C. (2001). “Estimating coefficients in 1D depth-averaged sediment transport model.” Can. J. Civ. Eng., 28, 536–540.
Han, Q. (1980). “A study on the non-equilibrium transport of suspended sediment.” Proc., 1st Int. Symp. on River Sedimentation, Beijing.
Horvath, I. (1994). Hydraulics in water and waste-water treatment technology, Wiley, U.K.
Imam, E., McCorquodale, J. A., and Bewtra, J. K. (1983). “Numerical modeling of sedimentation tanks.” J. Hydraul. Eng., 109(12), 1740–1754.
Jin, Y. C., Guo, Q. C., and Viraraghavan, T. (2000). “Modeling Class I settling tanks.” J. Environ. Eng., 126(8), 754–760.
Ostendorf, D. W., and Botkin, B. C. (1987). “Sediment diffusion in primary shallow rectangular clarifiers.” J. Environ. Eng., 113(3), 595–611.
Schamber, D. R., and Larock, B. E. (1981). “Numerical analysis of flow in sedimentation basins.” J. Hydraul. Div., Am. Soc. Civ. Eng., 107(5), 575–591.
Swamee, P. K., and Tyagi, A. (1996). “Design of Class-I sedimentation tanks.” J. Environ. Eng., 122(1), 71–73.
Tchobanoglous, G., and Burton, F. L. (1990). Wastewater engineering: Treatment, disposal, and Reuse, McGraw-Hill, New York.
van Rijn, L. C. (1984). “Sediment transport, Part II: Suspended load transport.” J. Hydraul. Eng., 110(11), 1613–1641.
van Rijn, L. C. (1989). “Handbook: Sediment transport by currents and waves.” Rep. No. H461, Delft Hydraulics, Delft, The Netherlands.
Zhou, S., and McCorquodale, J. A. (1992). “Modeling of rectangular settling tanks.” J. Hydraul. Eng., 118(10), 1391–1405.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jun 13, 2002
Accepted: Feb 10, 2005
Published online: Dec 1, 2005
Published in print: Dec 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.