Iodide-Enhanced Electrokinetic Remediation of Mercury-Contaminated Soils
Publication: Journal of Environmental Engineering
Volume 129, Issue 12
Abstract
This study investigates using an iodide-enhanced solution at the cathode during electrokinetic treatment to optimize the removal of mercury from soils. The experimental program consisted of testing two types of clayey soils, kaolin, and glacial till, that were initially spiked with 500 mg/kg of Hg(II). Experiments were conducted on each soil type at two voltage gradients (1.0 or 1.5 VDC/cm) to evaluate the effect of the voltage gradient when employing a 0.1 M KI solution. Additional experiments were performed on each soil type to assess the effect of using a higher iodide concentration (0.5 M KI) when using a 1.5 VDC/cm voltage gradient. The tests conducted on the kaolin soil showed that when the 0.1 M KI concentration was employed with the 1.0 VDC/cm voltage gradient, approximately 97% of the mercury was removed, leaving a residual concentration of 16 mg/kg in the soil after treatment. The tests conducted on glacial till indicated that it was beneficial to use the higher (0.5 M KI) iodide concentration and the higher (1.5 VDC/cm) voltage gradient to enhance mercury removal, because, under these conditions, a maximum of 77% of the mercury was removed from the glacial till, leaving a residual concentration of 116 mg/kg in soil after electrokinetic treatment. Compared to kaolin, the lower mercury removal from the glacial till soil is attributed to the more complicated soil composition, such as the presence of carbonates and organic matter, which caused Hg(II) to adsorb to the soil and/or exist as an immobile chemical species.
Get full access to this article
View all available purchase options and get full access to this article.
References
Acar, Y. B., and Alshawabkeh, A. N.(1993). “Principles of electrokinetic remediation.” Environ. Sci. Technol., 27(13), 2638–2647.
Alshawabkeh, A. N., and Bricka, M. (2000). “Basics and applications of electrokinetic remediation.” Remediation engineering of contaminated soils, D. L., Wise, D. J., Trantolo, E. J., Cichon, H. I. Inyang, and U. Stottmeister, eds., Marcel Dekker, New York, 95–111.
Chaparro, C. (1999). “Electrokinetic remediation of mercury-contaminated soils.” MS thesis, Univ. of Illinois at Chicago.
Coletta, T. F., Bruell, C. J., Ryan, D. K., and Inyang, H. I.(1997). “Cation-enhanced removal of lead from kaolinite by electrokinetics.” J. Environ. Eng., 123(12), 1227–1233.
Cox, C. D., Matthew, A. S., and Ghosh, M. M.(1996). “Electrokinetic remediation of mercury-contaminated soils using iodine/iodide lixiviant.” Environ. Sci. Technol., 30, 1933–1938.
Eykholt, G. R., and Daniel, D. E.(1994). “Impact of system chemistry on electroosmosis in contaminated soil.” J. Geotech. Eng., 120(5), 796–815.
Gilmour, J. T.(1971). “Inorganic complexes of divalent mercury in natural water systems.” Environ. Lett., 2(3), 143–152.
Hamed, J., and Acar, Y. B.(1991). “Pb (II) removal from kaolinite by electrokinetics.” J. Geotech. Eng., 117(2), 241–271.
Hanke, K. R., Kühnel, V., Stepan, D. J., Fraley, R. H., Robinson, C. M., Charlton, D. S., Gust, H., and Bloom, N. S. (1993). “Critical review of mercury contamination issues relevant to manometers at natural gas industry sites.” Gas Research Institute, GRI-93/0117, Chicago.
Hem, J. D. (1970). “Chemical behavior of mercury in aqueous media.” Mercury in the environment, USGS Paper 713, U.S. Geological Survey, Reston, Va., 19–25.
Li, R. S., and Li, L. Y.(2000). “Enhancement of electrokinetic extraction from lead-spiked soils.” J. Environ. Eng., 126(9), 849–857.
Pamukcu, S., and Wittle, J. K.(1992). “Electrokinetic removal of selected heavy metals from soil.” Environ. Prog., 11(3), 241–250.
Reed, B. E., Carriere, P. C., Thompson, J. C., and Hatfield, J. H.(1996). “Electronic (EK) remediation of a contaminated soil at several Pb concentrations and applied voltages.” J. Soil Contaminat, 5(2), 95–120.
Reddy, K. R., Chaparro, C., and Saichek, R. E.(2003). “Removal of mercury from clayey soils using electrokinetics.” J. Environ. Sci. Health. , A38(2), 307–338.
Reddy, K. R., and Chinthamreddy, S.(2003). “Sequentially enhanced electrokinetic remediation of heavy metals in low buffering clayey soils.” J. Geotech. Geoenviron. Eng., 129(3), 263–277.
Reddy, K. R., Parupudi, U. S., Devulapalli, S. N., and Xu, C. Y.(1997). “Effects of soil composition on the removal of chromium by electrokinetics.” J. Haz. Mater., 55(1–3), 135–158.
Reddy, K. R., and Parupudi, U. S.(1997). “Removal of chromium, nickel and cadmium from clays by in-situ electrokinetic remediation.” J. Soil Contaminat, 6(4), 391–407.
Reddy, K. R., and Shirani, A. B.(1997). “Electrokinetic remediation of metal contaminated glacial tills.” Geotech. Geologic. Eng., 15(1), 3–29.
Schuster, E.(1991). “The behavior of mercury in the soil with special emphasis on complexation and adsorption processes-a review of the literature.” Water, Air, Soil Pollut., 56, 667–680.
Shapiro, A. P., and Probstein, R. F.(1993). “Removal of contaminants from saturated clay by electroosmosis.” Environ. Sci. Technol., 27(2), 282–290.
U.S. Environmental Protection Agency (U.S. EPA). (1991). “Method 245.5, Revision 2.3: Determination of mercury in sediments by cold vapor atomic absorption spectrometry.” Environmental Monitoring Systems Laboratory, Office of Research and Development, Washington, D.C.
U.S. Environmental Protection Agency (U.S. EPA). (1994). “Method 245.1, Revision 3.0: Determination of mercury in water by cold vapor atomic absorption spectrometry.” Environmental Monitoring Systems Laboratory, Office of Research and Development, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Jun 5, 2001
Accepted: Oct 23, 2002
Published online: Nov 14, 2003
Published in print: Dec 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.