Synthesis, Characterization, and Coagulation of Polymeric Ferric Sulfate
Publication: Journal of Environmental Engineering
Volume 128, Issue 6
Abstract
This paper proposes a new approach to synthesize polymeric ferric sulfate (PFS). It was found that the basicity and stability of the synthesized PFS varied with the quantity of sulfuric acid used. The minimum amount of sulfuric acid needed for the synthesis of PFS to insure a residual concentration in the product lower than 0.1 wt% is about 31.0 wt% of the stoichiometric requirement. However, to produce a stable product which can be stored for six months, the amount of sulfuric acid should be 51.7 and 62.0 wt% of the stoichiometric requirement for PFS produced at 55 and 85°C, respectively. The structure of PFS depended on the synthesis temperature, as observed through x-ray diffraction and transmission electron microscopy. A comparison of the coagulation performance of PFS and ferric sulfate (FS) showed that PFS is, in general, more effective than FS in reducing the turbidity of Kaolinite suspensions for various conditions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Chinese Administration of Chemical Engineering (CACE). (1992) “Chinese polymeric ferric sulfate quality standard.” HG 2153-91, Beijing.
Dousma, J., and Bruyn, P. L.(1976). “Hydrolysis-precipitation studies of iron solutions. 1. Model for hydrolysis and precipitation from Fe(III) nitrate solutions.” J. Colloid Interface Sci., 59(3), 527–539.
Fan, M. (1997). “A quick method for synthesizing highly efficient flocculant-polymeric ferric sulfate chloride.” Chinese Patent No. ZL 93,120,033.4.
Fan, M. and Zhang, S. (1997). “Comparison of two polymeric ferric sulfate production technology.” Proc., Environ. Conf. for Young Chinese Scientists, Chinese Environmental Protection Association, Beijing, 247–250.
Fan, M., and Zhuang, Y. (1996). “A new approach to flue gas desulfrization and sulfur utilization.” Proc., the Asia-Pacific Conf. on Sustainable Energy and Envir. Tech., World Scientific, Singapore, 188–193.
Gary, K. A. (1998). “The preparation, characterization, and use of inorganic iron (III) polymers for coagulation in water treatment.” PhD thesis, John Hopkins Univ., Baltimore, 123.
Knight, R. J., and Sylva, R. N.(1974). “Precipitation in hydrolysed iron(III) solutions.” J. Inorg. Nucl. Chem., 36, 591–597.
Mikami, Y., and Yanayi, M. (1984). “The manufacturing method of polymeric ferric sulfate Liquid.” Japanese Patent No. 842,085.
Mikami, Y., Yanayi, M., Molita, H., and Tonaiyama, T.(1980). “The manufacturing method of polymeric ferric sulfate liquid.” PPM, 5, 24–32, Tokyo (in Japanese).
Peking University’s analytical chemistry experiment manual. (1993). Beijing Univ., Beijing, 182–185.
Stumm, W., and Morgan, J. J. (1981). Aquatic chemistry, Wiley, New York.
Tang, H., Stumm, W., and Morgan, J. J.(1987a). “The coagulating behaviors of Fe(III) polymers species-I. Performed polymers by base addition.” Water Res., 21(1), 115–121.
Tang, H., Stumm, W., and Morgan, J. J.(1987b). “The coagulating behaviors of Fe(III) polymers species-II. Performed polymers in various concentrations.” Water Res., 21(1), 123–128.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Dec 27, 2000
Accepted: Oct 25, 2001
Published online: May 15, 2002
Published in print: Jun 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.