Three-Dimensional Combustion Modeling in Municipal Solid-Waste Incinerator
Publication: Journal of Environmental Engineering
Volume 125, Issue 2
Abstract
Three-dimensional flame structures and mixing behaviors of turbulent burning flows in a municipal solid-waste incinerator are investigated by finite-element simulation. The modified κ-ε turbulence model together with wall functions was adopted. Devolatilization of solid wastes was simulated by gaseous methane (CH4) nonuniformly distributed along the inclined grate. The combustion process was considered as two-step stoichiometric reactions when primary underfire air entered and mixed with methane gas in the first combustion chamber. The mixing-controlled eddy-dissipation model was employed for predicting the reaction rates of CH4, O2, CO2, and CO. Results show that the grate is covered by cone-shaped flames that are bent and aligned with the flow directions. Additional mixing in the second combustion chamber can enhance the oxidation and can be improved by provision of more excess air or by the injection of secondary overfire air. Combustion efficiency up to 99.97% and an exit temperature around 1,100–1,300 K can be achieved at 100–150% excess air. Reasonable agreements are achieved between numerical predictions and available in-situ measurements.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Brooks, A. N., and Hughes, T. J. R. ( 1982). “Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations.” Comp. Methods in Appl. Mech. and Engrg., 32, 199–259.
2.
Chen, K. S., and Tong, C. H. (1997). “Modeling of turbulent burning flow and performance evaluation of municipal solid incinerator.”J. Envir. Engrg., ASCE, 123(11), 1150–1157.
3.
Dellinger B., Rubey, W. A., Hall, D. L., and Graham, J. L. ( 1986). “Incinerability of hazardous wastes.” Haz. Wastes and Haz. Mat., 3, 139–150.
4.
FIDAP 7.5 updated manual . (1995). Fluid Dynamics International, Evanston, Ill.
5.
Flagan, R. C., and Seinfeld, J. H. ( 1988). Fundamentals of air pollution engineering . Prentice-Hall, Englewood Cliffs, N.J.
6.
Hwang, C. C. ( 1997). “A study of combustion efficiency and organic products of a municipal waste incinerator,” MS thesis, Institute of Environmental Engineering, National Sun Yat-Sen University, Kaohsiung, Taiwan, Republic of China.
7.
Kilgroe, J. D., Nelson, L. P., Schindler, P. J., and Lanier, W. S. ( 1990). “Combustion control of organic emissions from municipal waste combustors.” Combustion Sci. Technol., 74, 223–244.
8.
Kuo, K. K. ( 1986). Principles of combustion. Wiley, New York.
9.
Lee, K. C. ( 1988). “Research areas for improved incineration system performance.” J. Air Pollution Control Assoc., 38(12), 1542–1550.
10.
Magnussen, B. F., and Hjertager, B. W. ( 1976). “On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion.” 16th Symp. (Int.) on Combustion, The Combustion Institute, Pittsburgh, 719–729.
11.
Ravichandran, M., and Gouldin, F. C. ( 1992). “Numerical simulation of incinerator overfire mixing.” Combustion Sci. Technol., 85, 165–185.
12.
Ravichandran, M., and Gouldin, F. C. ( 1993). “Residence time calculations using the numerical simulation of incinerator flows.” Combustion Sci. Technol., 91, 257–269.
13.
Theodore, L., and Reynolds, J. ( 1987). Introduction to hazardous waste incineration. Wiley, New York.
14.
Tillman, D. A., Rossi, A. J., and Vick, K. M. ( 1989). Incineration of municipal and hazardous solid wastes. Academic, New York.
15.
Tsai, Y. C. ( 1997). “Investigations of three dimensional flame structure and combustion efficiency in a municipal waste incinerator,” MS thesis, Institute of Environmental Engineering, National Sun Yat-Sen University, Kaohsiung, Taiwan, Republic of China.
16.
Yakhot, V., Orszag, S. A., Thangam, S., Gatski, T. B., and Speziale, C. G. ( 1992). “Development of turbulence models for shear flows by a double expansion technique.” Phys. of Fluids—A, 4(7), 1510–1520.
Information & Authors
Information
Published In
History
Received: Dec 2, 1997
Published online: Feb 1, 1999
Published in print: Feb 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.