Mixing in Distribution System Storage Tanks: Its Effect on Water Quality
Publication: Journal of Environmental Engineering
Volume 122, Issue 9
Abstract
Nearly all distribution systems in the United States include storage tanks and reservoirs. They are the most visible components of a water distribution system but are generally the least understood in terms of their impact on water quality. Long residence times in storage tanks can have negative impacts on water quality in drinking water distribution systems, including the loss of chlorine residuals and the regrowth of microorganisms. It is generally accepted that complete mixing maximizes water quality but little is understood about mixing regimes in general. This paper demonstrates the use of compartment models to characterize mixing in three tanks. It was found that the mixing regimes in these tanks were well characterized by compartment-type models and that these tanks were not completely mixed, contrary to conventional wisdom. It is clear that much more research is needed in order to truly understand mixing regimes in tanks and reservoirs and that this understanding, if properly applied, can have a positive impact on water quality.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Boulos, P. F., Altman, T., Jarrige, P. A., and Collevati, F.(1995a). “Discrete simulation approach for network water quality models.”J. Water Resour. Plng. and Mgmt., ASCE, 121(1), 49–60.
2.
Clark, R. M., and Coyle, J. A.(1990). “Measuring and modeling variations in distribution system water quality.”J. Am. Water Works Assn., 82(8), 40–53.
3.
Clark, R. M., Adams, J. Q., and Miltner, R. M.(1987). “Cost and performance modeling for regulatory decision making.”Water, 28(3), 20–27.
4.
Clark, R. M., Ehreth, D. J., and Convery, J. J.(1991a). “Water legislation in the U.S.: an overview of the safe drinking water act.”Toxicology and Industrial Health, 7(516), 43–52.
5.
Clark, R. M., Grayman, W. M., Goodrich, J. A., Deininger, R. A., and Hess, A. F. (1991b). “Field-testing distribution water quality models.”J. Am. Water Works Assn., 67–75.
6.
Danckwerts, P. V.(1958). “Continuous flow systems.”Chemical Engrg. Sci., 2(1), 1–18.
7.
Germeles, A. E. (1975). “Forced plumes and mixing of liquids in tanks.”Fluid Mech., 71(Part 3), 601–623.
8.
Grayman, W. M., and Clark, R. M.(1993). “Using computer models to determine the effect of storage on water quality.”J. Am. Water Works Assn., 85(7), 67–77.
9.
Kennedy, M. S., Moegling, S., Sarikelli, S., and Suravallop, K.(1993). “Assessing the effects of storage tank design.”J. Am. Water Works Assn., 85(7), 78–88.
10.
Kirmeyer, G. J., Richards, W., and Smith, C. D. (1994). “An assessment of the condition of North American water distribution systems and associated research needs.”Rep., AWWA Res. Found., Denver, Colo.
11.
Mau, R., Boulos, P., Clark, R., Grayman, W., Tekippe, R., and Trussel, R.(1995). “Explicit mathematical models of distribution system storage water quality.”J. Hydr. Engrg., ASCE, 121(10), 699–709.
Information & Authors
Information
Published In
Journal of Environmental Engineering
Volume 122 • Issue 9 • September 1996
Pages: 814 - 821
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Sep 1, 1996
Published in print: Sep 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.