Bubbleless Fiber Aerator for Surface Waters
Publication: Journal of Environmental Engineering
Volume 122, Issue 7
Abstract
The concept of bubbleless aeration with microporous hollow fiber membranes is tested in a system that does not require external energy input, other than pressurizing oxygen, and is designed to add oxygen to surface waters. Microporous hollow fiber membranes, potted at one end and connected to an oxygen supply, with the other end individually sealed, were installed vertically in a flume to simulate their performance in rivers and lakes. The gas-filled fibers tend to rise vertically due to buoyancy, while bending downstream due to the drag force exerted by the flowing water. When operated at differential pressures of up to 3 atm during the experiments, this cross-flow configuration resulted in high rates of gas transfer with no supplemental energy input. Gas-transfer coefficients were found to depend on cross-flow velocity and internal gas pressure for the tested fibers. Two possible applications for passive hollow fiber membrane aeration are considered, and contrasted with traditional methods of aeration.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ahmed, T., and Semmens, M. J. (1992a). “The use of sealed end fibers for bubbleless membrane aeration: experimental studies.”J. Membrane Sci., Vol. 69, 1–10.
2.
Ahmed, T., and Semmens, M. J. (1992b). “The use of independently sealed microporous hollow fiber membranes for oxygenation of water: model development.”J. Membrane Sci. Vol. 69, 11–20.
3.
Ahmed, T., and Semmens, M. J.(1996). “Use of transverse flow hollow fibers for bubbleless membrane aeration.”Water Res., 30(2), 440–446.
4.
Ahmed, T., Oakley, B. T., Semmens, M. J., and Gulliver, J. S.(1996). “Nonlinear deflection of polypropylene hollow fiber membranes in tranverse flow.”Water Res., 30(2), 431–439.
5.
Ashley, K. I. (1988). “Hypolimnetic aeration research in British Columbia.”Veh. Int. Verein. Limnol., Stuttgart, Germany, 23(Jan.), 215–219.
6.
Cote, P., Bersillon, J. L., and Huyerd, A. (1989). “Bubble-free aeration using membranes: mass transfer analysis.”J. Membrane Sci., Vol. 47, 91–105.
7.
Eckert, E. R., and Drake, R. M. (1972). Analysis of heat and mass transfer . McGraw-Hill Book Co., Inc., New York, N.Y.
8.
Fast, A. W., and Lorenzen, M. (1976). “Synoptic survey of hypolimnetic aeration.”J. Envir. Engrg., ASCE, Vol. 102(6), 1161–1174.
9.
Hanratty, T. (1991). “Effect of gas flow on physical absorption.”Air-water transfer, S. C. Wilhelms and J. S. Gulliver, eds., ASCE, New York, N.Y., 10–33.
10.
Macaitis, W. et al. (1991). “Sidestream elevated pool aeration station design.”Air-water mass transfer, S. C. Wilhelms and J. S. Gulliver, eds., ASCE, New York, N.Y., 670–681.
11.
McQueen, D. J., and Lean, D. R. S.(1986). “Hypolimnetic aeration: an overview.”Water Pollution Res. J. Canada, 21(2), 205–217.
12.
Oakley, B. T. (1994). “A passive membrane aerator,” MS thesis, Univ. of Minnesota, Minneapolis, Minn.
13.
Semmens, M. J., Ahmed, T., and Voss, M. A. (1991). “Field tests on a bubbleless membrane aerator.”Air-water mass transfer, S. C. Wilhelms and J. S. Gulliver, eds., ASCE, New York, N.Y., 694–705.
14.
Wright, F. M. (1986). Fluid mechanics . McGraw-Hill Book Co., Inc., New York, N.Y.
15.
Yang, M. C., and Cussler, E. L. (1986). “Designing hollow-fiber contractors.”AIChE J., Vol. 32(11), 1910–1916.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Jul 1, 1996
Published in print: Jul 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.