Evaluation of Lead-Bearing Phases in Municipal Waste Combustor Fly Ash
Publication: Journal of Environmental Engineering
Volume 122, Issue 1
Abstract
The understanding of the physical and chemical processes involved in the transport of heavy metals during municipal waste combustion is incomplete. As part of efforts to improve this understanding this research focuses on determining the composition, morphology, and distribution of lead-bearing phases in municipal solid-waste combustor fly ash. This research uses scanning electron microscopy coupled with energy dispersive spectrometry, an electron microprobe analyzer, and digital imaging software to automatically search, locate, and evaluate lead-bearing phases. Results indicate the presence of lead in several types of particles with various compositions and morphologies. Lead was observed in two forms including Pb-Cl rich inclusions that exhibit no specific crystal habit and in lower concentrations in K-Cl-Pb and Na-Cl-Pb inclusions that exhibit a cubic habit. Several elements including K, Na, S, Ca, Cl, and Zn were common to all lead-bearing phases. Although previous leaching studies have indicated lead to be predominant in the smaller-size ash particles, lead identified in this study was found to be reasonably well distributed throughout all size fractions studied. Results obtained in this study are a necessary part of engineering efforts to improve the process of municipal waste combustion including the control and transport of heavy metals.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Brunner, P. H., and Monch, H.(1986). “The flux of metals through municipal solid waste incinerators.”Waste Mgmt. and Res., 4, 170–178.
2.
Cahill, C. A., and Newland, L. W.(1982). “Comparative efficiencies of trace metal extraction from municipal incinerator ashes.”Int. J. Envir. Anal. Chem., 11, 227–239.
3.
Clapp, T. L., Magee, J. F. II, Ahlert, R. C., and Kosson, D. S.(1988). “Municipal solid waste composition and the behavior of metals in incinerator ashes.”Envir. Progress, 7, 22–30.
4.
Davison, R. L., Natusch, D. F. S., Wallace, J. R., and Evans, C. A.(1974). “Trace elements in fly ash: dependence of concentration on particle size.”Envir. Sci. and Technol., 8(13), 1107–1113.
5.
Eighmy, T. T., Domingo, D., Krzanowski, J. R., Stampfli, D., and Eusden, D. (1993). “The speciation of elements in incineration residues.”Proc., Municipal Waste Combustion Conf., Williamsburg, Va.
6.
Environmental almanac. (1994). World Resources Institute, Houghton Mifflin Company, Boston, Mass.
7.
Federal register. (1990). Volume 55(261), 11798–11877.
8.
Federal register. (1980). Volume 45(98), 33127–33129.
9.
Fernandez, M. A., Martinez, L., Segarra, M., Garcia, J. C., and Espiell, F. (1992). “Behavior of heavy metals in the combustion gases of urban waste incinerators.”Envir. Sci. and Technol., 26.
10.
Greenberg, R. R., Zoller, W. H., and Gordon, G. E. (1978). “Composition and size distributions of particles released in refuse incineration.”Envir. Sci. and Technol., 12.
11.
Heck, H. H., Korzun, E. A., Shieh, C. S., and Archer, J. (1992). “Sources and fate of lead, cadmium and mercury in the resource recovery process.”Proc., 1st Annu. Solid Waste Res. Symp., Orlando, Fla.
12.
Henry, W. M., Barbour, R. L., Jakobsen, R. J., and Schumacher, P. M. (1983). “Inorganic compound identification of fly ash emissions from municipal incinerators.”Project Summary No. EPA/600/S3-82-095, U.S. Environmental Protection Agency, Washington, D.C.
13.
Hurlbut, C. S. Jr., and Klein, C., eds. (1977). “Manual of mineralogy.” John Wiley & Sons, New York.
14.
Kirby, C. S., and Rimstidt, J. D. (1993). “Mineralogy and surface properties of municipal solid waste ash.”Envir. Sci. and Technol., 27.
15.
Klein, D. H., Andren, A. W., Carter, J. A., Emery, J. F., Feldman, C., Fulkerson, W., Lyon, W. S., Ogle, J. C., Talmi, Y., Van Hook, R. I., and Bolton, N.(1975). “Pathways of thirty-seven trace elements through coal-fired power plant.”Envir. Sci. and Technol., 9(10), 973–979.
16.
Legiec, I. A., Hayes, C. A., and Kosson, D. S. (1989). “Continuous recovery of heavy metals from MSW incinerator ashes.”Envir. Progress, 8.
17.
Ontiveros, J. L., Clapp, T. L., and Kosson, D. S. (1989). “Physical properties and chemical species distributions within municipal waste combuster ashes.”Envir. Progress, 8.
18.
Sawell, S. E., Hetherington, S., Chandler, A. J., Rigo, H. G., Fraser, J. (1993). “The waste analysis, sampling, testing and evaluation program: effects of lead and cadmium spiking of MSW on the characteristics of MSW incinerator residues.”Proc., Municipal Waste Combustion Conf., Williamsburg, Va., March 29–April 2.
19.
Sutter, L. L., Sandell, J. F., and Dewey, G. R. (1994). “Applications of electron microprobe and mineral liberation analysis techniques to municipal solid waste combustor fly ash.”Proc., Minerals, Metals, and Mat. Soc.—Int. Symp. on Extraction and Processing for the Treatment and Minimization of Wastes, San Francisco, Calif., February 27–March 3.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Jan 1, 1996
Published in print: Jan 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.