Inlet-Structure Design for Final Clarifiers
Publication: Journal of Environmental Engineering
Volume 121, Issue 8
Abstract
A final-clarifier inlet design for improving the flow conditions and the settling efficiency is described. Numerical simulations and experiments are introduced in order to model and analyze the flow field as well as to evaluate the design criteria. It is demonstrated that inlet structures of primary and secondary clarifiers cannot be optimized by the same procedure. Although primary-clarifier inlet design is mainly concerned with dissipation of kinetic energy, secondary-clarifier inlet design requires the consideration of density effects on the flow field as well as flocculation properties of the activated sludge. The suggested design includes (1) an inlet expanding over the whole width of the tank, positioned at the bottom, and with a relatively low aperture height in order to reduce potential energy flux; (2) a series of angle bars beyond the inlet for dissipation of kinetic energy and decrease of velocity fluctuations; and (3) dimensioning the inlet volume as flocculation chamber. The introduced inlet design must be tested in the future in either full-scale or pilot-scale tanks with activated sludge.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adams, E. W., and Rodi, W. (1988). “Prediction of density-driven flows in settling basins.”Rep. SFB 210/T/41, Univ. of Karlsruhe, Karlsruhe, Germany.
2.
Altinakar, S., Graf, W. H., and Hopfinger, E. J.(1990). “Weakly depositing turbidity current on a small slope.”J. Hydr. Res., 28(1), 55–80.
3.
Anderson, N. E.(1945). “Design of settling tanks for activated sludge.”Sewage Works J., 17(1), 50–63.
4.
Blevins, R. D. (1984). Applied fluid dynamics handbook . Van Nostrad Reinhold Co., New York, N.Y.
5.
Bretscher, U., Hager, W., and Hager, W. H. (1984). “Untersuchungen über die Strömungs- und Feststoff-Verteilungen in Nachklärbecken.”gwf-wasser/abwasser, Münich, Germany, 125(2), 81–90 (in German).
6.
Bretscher, U., Krebs, P., and Hager, W. H.(1992). “Improvement of flow in final settling tanks.”J. Envir. Engrg., ASCE, 118(3), 307–321.
7.
Camp, T. R., and Stein, P. C.(1943). “Velocity gradients and internal work in fluid motion.”J. Boston Soc. of Civ. Engrs., 30(4), 219–237.
8.
Fischerström, C. N. H., Isgard, E., and Larsen, I. (1967). “Settling of activated sludge in horizontal tanks.”J. Sanit. Engrg. Div., ASCE, 93(SA3), 73–83.
9.
Fitch, E. B., and Lutz, W. A.(1960). “Feedwells for density stabilization.”J. WPCF, 32(2), 147–156.
10.
Hazen, A. (1904). “On sedimentation.”Trans. ASCE, Paper No. 980, 45–71.
11.
Hermann, F. (1990). “Experimente zur Dynamik von Staublawinen in der Auslaufzone.”Rep. No. 107, Lab. of Hydr., Hydro., and Glaciology, ETH Zürich, Switzerland.
12.
Imam, E. H. H. (1981). “Numerical modelling of rectangular clarifiers,” dissertation, Univ. of Windsor, Ontario, Canada.
13.
Imam, E., McCorquodale, J. A., and Bewtra, J. K.(1983). “Numerical modeling of sedimentation tanks.”J. Hydr. Engrg., ASCE, 109(12), 1740–1754.
14.
Knop, E. (1952). “Ueber den Einfluß der Strömung auf Flockung und Absetzvorgänge in Klärbecken.”Gesundheits-Ingenieur, Munich, Germany, 73(9/10), 157–163 (in German).
15.
Knop, E.(1966). “Design studies for the Emscher mouth treatment plant.”J. WPCF, 38(7), 1194–1207.
16.
Krebs, P. (1989). “Modellierung von Strömungen in rechteckigen Nachklärbecken.”Gas-Wasser-Abwasser, Zürich, Switzerland, 69(11), 718–728 (in German).
17.
Krebs, P. (1991a). “The hydraulics of final settling tanks.”Water Sci. and Tech., 23(4-6), 1037–1046.
18.
Krebs, P. (1991b). “Density currents in final settling tanks.”Proc., 14th IAHR Cong., A713-A720, Int. Assoc. for Hydr. Res. (IAHR), Delft, The Netherlands.
19.
Krebs, P., Vischer, D., and Gujer, W. (1992). “Improvement of secondary clarifiers efficiency by porous walls.”Water Sci. and Tech., 26(5-6), 1147–1156.
20.
Kynch, G. J.(1952). “A theory on sedimentation.”Trans., Faraday Soc., London, England, 48, 166–176.
21.
Larsen, P. (1977). “On the hydraulics of rectangular settling basins.”Rep. No. 1001, Dept. of Water Resour. Engrg., Lund Inst. of Technol., Lund, Sweden.
22.
Launder, B. E., and Spalding, D. B.(1974). “The numerical computation of turbulent flows.”Computer Methods in Appl. Mech. and Engrg., 2, 207–209.
23.
Lyn, D. A. (1992). “Laboruntersuchungen der Strömungsverhältnisse in einem längsdurchströmten Modellabsetzbecken.”Rep. SFB 210/T/82, Univ. of Karlsruhe, Karlsruhe, Germany (in German).
24.
Lyn, D. A., and Rodi, W.(1990). “Turbulence measurements in model settling tank.”J. Hydr. Engrg., ASCE, 116(1), 3–21.
25.
Lyn, D. A., Stamou, A. I., and Rodi, W.(1992). “Density currents and shear-induced flocculation in sedimentation tanks.”J. Hydr. Engrg., ASCE, 118(6), 849–867.
26.
McCorquodale, J. A., and Zhou, S.(1993). “Effects of hydraulic and solids loading on clarifier performance.”J. Hydr. Res., 31(4), 461–478.
27.
Merkel, W. (1971). “Die Bemessung horizontal durchströmter Nachklärbecken von Belebungsanlagen.”gwf-wasser/abwasser, Munich, Germany, 112(12), 596–600 (in German).
28.
Parker, D. S., Kaufman, W. J., and Jenkins, D.(1971). “Physical conditioning of activated sludge floc.”J. WPCE, 43(9), 1817–1833.
29.
Rodi, W. (1980). Turbulence models and their applications in hydraulics—a state of the art paper . Int. Assoc. for Hydr. Res. (IAHR), Delft, The Netherlands.
30.
Rosten, H. I., and Spalding, D. B. (1987). “The PHOENICS reference manual.”Rep. TR200, Cham Ltd., London, England.
31.
Simpson, J. E. (1987). Gravity currents in the environment and the laboratory . Ellis Horwood Ltd., Chichester, England.
32.
Szalai, L., Krebs, P., and Rodi, W.(1994). “Simulation of flow in circular clarifiers with and without swirl.”J. Hydr. Engrg., ASCE, 120(1), 4–21.
33.
Takács, I., Patry, G. G., and Nolasco, D.(1991). “A dynamic model of the clarification-thickening process.”Water Res., 25(10), 1263–1271.
34.
Valentin, F. (1988). “Zur Problematik der verzögerten Bewegung in Rundbecken mit zentrischer Beaufschlagung.”Rep. No. 50, Institut für Hydraulik und Gewässerkunde, TU München, Germany, 57–90 (in German).
35.
Weidner, J. (1967). “Zufluß, Durchfluß und Absetzwirkung zweckmäßig gestalteter Rechteckbecken.”Rep. No. 30, Institut für Siedlungswasserwirtschaft, Univ. of Stuttgart, Stuttgart, Germany (in German).
36.
Wiegmann, H., and Müller-Neuhaus, G. (1951). “Zwei neue Kläranlagen der Emschergenossenschaft.”Die Wasserwirtschaft, Stuttgart, Germany, 42(3), 61–67 (in German).
37.
Zhou, S., and McCorquodale, J. A.(1992). “Modeling of rectangular settling tanks.”J. Hydr. Engrg., ASCE, 118(10), 1391–1405.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Aug 1, 1995
Published in print: Aug 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.