Measurement of Turbulent Flow in Standard Jar Test Apparatus
Publication: Journal of Environmental Engineering
Volume 121, Issue 12
Abstract
Although the jar test has long been used in coagulation and flocculation, there is little available information on vessel hydrodynamics. Vessel-average parameters such as the root-mean-square velocity gradient, , have traditionally been used for hydraulic simultude between the jar test and the full scale. With the recognition that vessel-average parameters may not truly represent hydraulic conditions within a vessel, there is a need to characterize jar test hydrodynamics. Analysis of turbulent flow in a standard jar test apparatus was completed using a two-dimensional laser doppler anemometer. Three dimensional velocity measurements were used to determine the general flow field, dissipation rates, and turbulent length scales within the jar. Substantial variations in turbulent characteristics were found to occur within the vessel. Scaling relations were developed for various turbulent parameters. Values for scaling constants were found to be different than those reported for the Rushton turbine, which is by far the most studied mixing impeller. For example, “scaling constants” for local turbulent dissipation rates in the impeller zone were found to be in the order of five times less than the Rushton turbine. This result is significant because many researchers have accounted for inhomogeneties in mixing characteristics within the jar test apparatus by using findings from available data on the Rushton turbine.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Water Works Association (AWWA). (1990). Water quality and treatment, 4th Ed., McGraw-Hill, Inc., New York, N.Y.
2.
Armstrong, S. G., and Ruszkowski, S. (1988). “The flow field in the discharge stream of disk turbines.”Proc., 6th Eur. Conf. on Mixing, Springer-Verlag KG, Berlin, Germany, 1–6.
3.
Bertrand, J., Couderc, J. P., and Angelino, H.(1980a). “Power consumption, pumping capacity and turbulence intensity in baffled stirred tanks: comparison between several turbines.”Chem. Engrg. Sci., 35, 2157–2163.
4.
Bertrand, J., Couderc, J. P., and Angelino, H. (1980b). “Ecoulement dans le Courant de Refoulement d'une Turbine a Disque et Six Plates Dans une Cuve Munie de Chicanes.”Chem. Engrg. J., 19, 113–123 (in French).
5.
Camp, T. R.(1969). “Hydraulics of mixing tank.”J. Boston Soc. Civ. Engrg., 56(1), 1–11.
6.
Camp, T. R., and Stein, P. C. (1943). “Velocity gradient and internal work in fluid motion.”J. Boston Soc. Civ. Engrg., 30(10), 219– 237.
7.
Clark, M. M.(1985). “Critique of Camp and Stein's RMS velocity gradient.”J. Envir. Engrg., ASCE, 111(6), 741–754.
8.
Clark, M. M., et al. (1994). Selection and design of mixing processes for coagulation . Am. Water Works Assoc. Res. Found. and Am. Water Works Assoc., Denver, Colo.
9.
Cleasby, J. L.(1984). “Is velocity gradient a valid turbulent flocculation parameter?”J. Envir. Engrg., ASCE, 110(5), 875–897.
10.
Cooper, R. G., and Wolf, D.(1968). “Velocity profiles and pumping capacities for turbine-type impellers.”Can. J. Chem. Engrg., 46, 94–100.
11.
Cornwell, D. A., and Bishop, M. M.(1983). “Determining velocity gradients in laboratory and full-scale systems.”J. AWWA, 75, 470–475.
12.
Costes, J., and Couderc, J. P. (1982). “Pumping capacity and turbulence intensity in baffled stirred tanks; influence of the size of the pilot unit.”Proc., 4th Eur. Conf. on Mixing, Springer-Verlag KG, Berlin, Germany, 25–24.
13.
Cutter, L. A.(1966). “Flow and turbulence in a stirred tank.”AIChE J., 12, 35–45.
14.
Fort, I., and Mala, J.(1982). “Hydraulic characteristics of turbine impeller.”Coll. Czech. Chem. Comm., 47, 421–432.
15.
Gregory, J.(1989). “Fundamentals of flocculation.”Critical Rev. in Envir. Control, 19(3), 185–230.
16.
Gunkel, A. A., and Weber, M. E.(1975). “Flow phenomena in stirred tanks I: the impeller stream.”AIChE J., 21, 931–949.
17.
Han, M., and Lawler, D. F.(1992). “The (relative) insignificance of G in flocculation.”J. AWWA, 84(10), 79–91.
18.
Hanson, A. T., and Cleasby, J. L.(1990). “The effects of temperature on turbulent flocculation: Fluid dynamics and chemistry.”J. AWWA, 82(11), 56–73.
19.
Hekestad, G.(1965). “A generalized Taylor hypothesis with application for high Reynolds number turbulent shear flows.”J. Appl. Mech., 32, 735–739.
20.
Hinze, J. O. (1987). Turbulence, an introduction to its mechanisms and theory, 2nd Ed., McGraw-Hill Classic Textbook Reissue, McGraw-Hill, New York, N.Y.
21.
Hudson, H. E. Jr. (1981). Water clarification processes: practical design and evaluation . Van Nostrand Reinhold Co., New York, N.Y.
22.
Hudson, H. E. Jr., and Wagner, E. G.(1981). “Conduct and use of jar tests.”J. AWWA, 73(4), 218–224.
23.
Keller, D. B. A. (1985). “To determine the pumping capacity of a disk turbine impeller at different Reynolds numbers.”Proc., 5th Eur. Conf. on Mixing, Springer-Verlag KG, Berlin, Germany, 25–34.
24.
Kolar, V., Filip, P., and Curev, A. G.(1982). “The swirling radial jet.”Appl. Sci. Res., 39, 329–335.
25.
Komasawa, I. R., Kuboi, R., and Otake, T.(1974). “Fluid and particle motion in turbulent dispersion. I: measurement of turbulence of liquid by continual pursuit of tracer particle motion.”Chem. Engrg. Sci., 29, 641–650.
26.
Kresta, S. M., and Wood, P. E. (1991). “Prediction of the three dimensional turbulent flow in stirred tanks.”AIChE J., 37, 448– 460.
27.
Kresta, S. M., and Wood, P. E. (1993). “The flow field produced by a pitched blade turbine: characterization of the turbulence and estimation of the dissipation rate.”Chem. Engrg. Sci., 48(10), 1761– 1774.
28.
Mahouast, M., Cognet, G., and David, R.(1987). “Analysis of turbulent mixing in a CFSTR from LDV measurements.”Proc., ASME 3rd Int. Symp. on Laser Anemometry, Am. Soc. of Mech. Engrs. (ASME), New York, N.Y., FED, 55, 157–166.
29.
Mahouast, M., David, R., and Cognet, G. (1988). “Periodic phenomena generated in the discharge flow by a Rushton turbine in a CSTR and investigation of the Reynolds stresses.”Proc., 6th Eur. Conf. on Mixing, Springer-Verlag KG, Berlin, Germany, 23–28.
30.
Nouri, J. M., Whitelaw, J. H., and Yianneskis, K. (1987). “The scaling of the flow field with impeller size and rotational speed in a stirred reactor.”Proc., 2nd Int. Conf. on Laser Anemometry-Adv. and Applications, Springer-Verlag KG, Berlin, Germany, 489–500.
31.
Saffman, P. G., and Turner, J. S.(1956). “On the collision of drops in turbulent clouds.”J. Fluid Mech., 1, 16–28.
32.
Smoluchowski, M. W.(1916). “Versuch einer Mathematischen Theorie der Koagulations Kinetik Kolloider Losungen.”Zeitschrift f. Physik. Chemie, 92, 126.
33.
Tambo, N., and Hozumi, H.(1979). “Physical characteristics of flocs. II: strength of floc.”Water Res., 13, 421–427.
34.
Van der Molen, K., and Van Maanen, H. R. E.(1978). “Laser doppler measurements of the turbulent flow in stirred vessels to establish scaling rules.”Chem. Engrg. Sci., 33, 1161–1168.
35.
van Doorn, M. (1981). “On Taylor's hypothesis in turbulent shear flows.”Internal note 811123, Univ. of Missouri-Rolla, Mo.
36.
Van't Riet, K., Bruijn, W., and Smith, J. M.(1976). “Real and pseudo-turbulence in the discharge stream from a Rushton turbine.”Chem. Engrg. Sci., 31, 407–412.
37.
Weetman, R. J., and Oldshue, J. Y. (1988). “Power, flow, and shear characteristics of mixing impellers.”Proc., 6th Eur. Conf. on Mixing, Springer-Verlag KG, Berlin, Germany, 43–50.
38.
Wong, C. W., and Huang, C. T. (1988). “Flow characteristics and mechanical efficiency in baffled stirred tanks with turbine impellers.”Proc., 6th Eur. Conf. on Mixing, Springer-Verlag KG, Berlin, Germany.
39.
Wu, H., and Patterson, G. K.(1989). “Laser doppler measurements of turbulent flow parameters in a stirred mixer.”Chem. Engrg. Sci., 44, 2207–2221.
40.
Wu, H., Patterson, G. K., and van Doorn, M.(1989). “Distribution of turbulence energy dissipation rates in a Rushton turbine stirred mixer.”Experiments in Fluids, 8, 153–160.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Dec 1, 1995
Published in print: Dec 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.