Case Study-Based Challenges of Quality Concrete Finishing for Architecturally Complex Structures
This article is a reply.
VIEW THE ORIGINAL ARTICLEThis article has a reply.
VIEW THE REPLYPublication: Journal of Construction Engineering and Management
Volume 133, Issue 3
Abstract
This paper focuses on the procedure utilized in the construction of tilt-up irregular concrete panels that are constructed on-site using concrete slabs and wooden formwork. The case study required high-quality concrete finishing. The erection and installation procedure called for a maximum panel-to-panel joint tolerance of , often joints between panels. To meet precision requirements, the casting slabs were leveled and flattened with laser screed technology and smoothed with chemical solutions. To ensure that the final result met expectations, a mock-up model was built using different types of materials and to simulate site constraints. The architectural design is a composition of precast concrete panels like “Lego” pieces assembled similarly to a jigsaw puzzle. The unique construction process required a state-of-the-art analysis to produce the set quality. Quality conditions as set by the owner included creating a smooth concrete surface on all panels while avoiding damages and reducing equipment and material costs. The proposed methodology is described through its implementation on the case study, which is also described in this paper.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The information gathered and presented in this document is derived from the good practice of engineering and a commitment to improve and enhance a process that satisfied the owner’s desire for excellent results. Special thanks to the Seaview Development Corportation team for providing the opportunity and the means to perform this research, for their help and unconditional support.
References
ASTM. (1996). “Standard test method for determining floor flatness and floor levelness numbers.” ASTM E 1155-96. West Conshohocken, Pa. 1–8.
Canadian Precast Prestressed Concrete Institute (CPCI). (2003). “Benefits and advantages.” ⟨http://www.cpci.ca⟩ (March 17, 2006).
Chithanranjan, N. (1998). “A housing kit for mass housing.” Indian Concrete J., 72(1), 41–46.
Face Construction Technologies, Inc. (2005a). “Dipstick elevation studies.” The Dipstick, Norfolk, Va., 1–6.
Face Construction Technologies, Inc. (2005b). “Dipstick hints and tips—DS2272 version.” The Dipstick, Norfolk, Va., 1–4.
Future Tech Consultants of New York, Inc. (FTC). (2005). “Floor flatness and levelness survey.” ⟨http://www.ftcny.com⟩ (Jan. 5, 2006).
Hanna, A., and Zenon, Z. (2003). “Prefabricated concrete foundations for housing.” Int. J. Housing Science, 27(1), 41–51.
Holl, S. (2004). Steven Holl Architecs, Brooklyn, N.Y., ⟨http://www.stevenholl.com/⟩ (December 10, 2005).
Manrique, J., Al-Hussein, M., Telyas, A., and Funston, G. (2005). “Constructing a unique and complex tilt-up-panel structure utilizing 3D CAD and animation.” 22nd Int. Symp. on Automation and Robotics in Construction—Program and Abstracts, Ferrara, Italy, 98.
Meadow Burk. (2002). Meadow Burke on tilt-up: The complete tilt-up system manual, Meadow Burke Products, Tampa, Fla., 5–81.
Mehta, P. K., and Monteiro, P. J. M. (1993). Concrete structure, properties, and materials, 2nd Ed., Prentice-Hall, Englwood Cliffs, N.J.
National Geographic Society. (2002). “Megastructures: Petronas Towers.” Prime time videos, ⟨www.nationalgeographic.com⟩ (October 4, 2005).
Nox-Crete Products Group. (2003). “Chemical solutions to concrete problems.” Product data and specifications, Omaha, Neb., 1–8.
Nox-Crete Products Group. (2004). “Single source solutions for tilt-up construction.” Product data and specifications, Omaha, Neb., 3–11.
Seaview Development Corp., Inc. (2004). “68 Wheatley mock-up panels installation and fabrication.” ⟨www.seaviewcorp.com⟩ (Sepemtber 15, 2005).
Stephens, J. (1976). Towers, bridges, and other structures. Sterling, New York, 116–141.
Victory Bear. (2004). “Construction products for pre-cast concrete and tilt-up constructions.” ⟨http://www.victorybear.com⟩ (September 22, 2005).
Weimann, M. (2004). “Application of laser light for the fabrication of concrete assembly units.” ⟨www.z-laser.com⟩ (March 2006).
West, M., Court, S., Melo, J., Thomas, D., Vivas, W., Wiebe, C., and Wittman, D. (2002). “Concrete wall panels.” Materials Technology Workshop, Dept. of Architecture, Univ. of Manitoba.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jan 11, 2006
Accepted: May 15, 2006
Published online: Mar 1, 2007
Published in print: Mar 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.