Minimizing Construction-Related Hazards in Airport Expansion Projects
Publication: Journal of Construction Engineering and Management
Volume 132, Issue 6
Abstract
Airport expansion projects often require the presence and movement of construction labor and equipment near critical airport traffic areas. This close proximity between construction activities and airport operations needs to be carefully considered during the planning of construction site layouts in order to minimize and eliminate all potential construction-related hazards to aviation safety. This paper presents the development of a multiobjective optimization model for planning airport construction site layouts that is capable of minimizing construction-related hazards and minimizing site layout costs, simultaneously. The model incorporates newly developed optimization functions and metrics that enable: (1) maximizing the control of hazardous construction debris near airport traffic areas; (2) minimizing site layout costs including the travel cost of construction resources and the cost of debris control measures on airport sites; and (3) satisfying all operational safety constraints required by the federal aviation administration as well as other practical site layout constraints. The model is implemented using a multiobjective genetic algorithm and an application example is analyzed to demonstrate the use of the model and its capabilities in optimizing construction site layouts in airport expansion projects.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
The writers gratefully acknowledge the financial support provided for this research project by the National Science Foundation under NSF CAREER Award No. NSFCMS 0238470.
References
Air Nav (AN). (2004). “Phoenix Sky Harbor International Airport.” ⟨http://www.airnav.com/airport/KPHX⟩ (October 29, 2004).
Boeing. (2004). “Foreign object debris.” ⟨http://www.boeing.com/commercial/aeromagazine/aero_01/textonly/s01txt.html⟩ (August 30, 2004).
Caterpillar (CAT). (2005). “Caterpillar: TH350B Telehandlers.” ⟨http://cmms.cat.com/cmms/servlet/cat.dcs.cmms.servlet.GetModelSummary?dsfFlag=0&&classid=406&langid=en&rgnid=NACD&view=cat&prdname=TH350B&prdid=TH350B-NACD&familyid=480&subfamilyid=267&subfamilyheader=Telehandlers⟩ (March 2005).
Cheng, M., and O’Connor, J. (1996). “ArcSite: Enhanced GIS for construction site layout.” J. Constr. Eng. Manage., 122(4), 329–336.
Deb, K. (2001). Multi-objective optimization using evolutionary algorithms, Wiley, New York.
Deb, K., Agrawal, S., Pratab, A., and Meyarivan, T. (2000). “A fast elitist nondominated sorting genetic algorithm for multi-objective optimization: NSGA-II.” KanGAL Rep. No. 200001, Indian Institute of Technology, Kanpur, India.
El-Rayes, K., and Hyari, K. (2005). “Optimal lighting arrangements for nighttime highway construction projects.” J. Constr. Eng. Manage., 131(12), 1292–1300.
El-Rayes, K., and Kandil, A. (2005). “Time-cost-quality trade-off analysis for highway construction.” J. Constr. Eng. Manage., 131(4), 477–486.
Federal Aviation Administration (FAA). (1987). “A model zoning ordinance to limit height of objects around airports.” Advisory Circular No. 150/5190-4A, U.S. Dept. of Transportation, Washington, D.C.
Federal Aviation Administration (FAA). (1989). “Airport design.” Advisory Circular No. 150/5300-13, U.S. Dept. of Transportation, Washington, D.C.
Federal Aviation Administration (FAA). (1996). “Debris hazards at civil airports.” Advisory Circular No. 150/5380-5B, U.S. Dept. of Transportation, Washington, D.C.
Federal Aviation Administration (FAA). (2001b). “American capacity enhancement plan: Building capacity today for the skies of tomorrow.” ACE Plan 2001, Office of System Capacity, Washington, D.C.
Federal Aviation Administration (FAA). (2001a). “A commitment to security: Federal Aviation Administration civil aviation security strategic plan 2001–2004.” Office of System Capacity, Washington, D.C.
Federal Aviation Administration (FAA). (2003). “Operational safety on airports during construction.” Advisory Circular No. 150/5370-2E, U.S. Dept. of Transportation, Washington, D.C.
Hegazy, T., and Elbeltagi, E. (1999). “EvoSite: Evolution-based model for site layout planning.” J. Comput. Civ. Eng., 13(3), 198–206.
Hyari, K., and El-Rayes, K. (2006). “Optimal Planning and Scheduling for Repetitive Construction Projects.” J. Manage. Eng., 22(1), 11–19.
Kandil, A., and El-Rayes, K. (2005). “Parallel computing framework for optimizing construction planning in large-scale projects.” J. Comput. Civ. Eng., 19(3), 304–312.
Li, H., and Love, P. E. D. (1998). “Site-level facilities layout using genetic algorithms.” J. Comput. Civ. Eng., 12(4), 227–231.
Means, R. S. (2005). “Building construction cost data 2005.” R. S. Means, Kingston, Mass.
Tommelein, I. D., Levitt, R. E., and Hayes-Roth, B. (1992). “Sight plan model for site layout.” J. Constr. Eng. Manage., 118(4), 749–766.
Tommelein, I. D., and Zouein, P. P. (1993). “Interactive dynamic layout planning.” J. Constr. Eng. Manage., 119(2), 266–287.
Yeh, I. (1995). “Construction-site layout using annealed neural networks.” J. Comput. Civ. Eng., 9(3), 201–208.
Zitzler, E., and Thiele, L. (1999). “Multiobjective evolutionary algorithms: A comparative case study and the strength Pareto approach.” IEEE Trans. Evol. Comput., 3(4), 257–271.
Zouein, P. P., and Tommelein, I. D., (1999). “Dynamic layout planning using a hybrid incremental solution method.” J. Constr. Eng. Manage., 125(6), 400–408.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: May 18, 2005
Accepted: Oct 19, 2005
Published online: Jun 1, 2006
Published in print: Jun 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.