Analyses of Instability in Mobile Cranes due to Ground Penetration by Outriggers
Publication: Journal of Construction Engineering and Management
Volume 131, Issue 6
Abstract
This study focuses on the phenomenon of ground instability causing mobile cranes to overturn. Four outriggers usually support a mobile crane in order to restrict pitching during hoisting operations. Nevertheless, the crane may become quite unstable if the outriggers should happen to sink into the bearing ground. In this paper, various types of analysis, including experiments, were performed in order to investigate the influence of ground penetration by outriggers on the stability of mobile cranes. Through study of the results of experimentation and simulation, it has been clarified that mobile cranes become highly unstable as a result of rapid penetration. It was found that an index of relative instability had a linear relationship to the common logarithm of an index for brittle failure as derived from the load–settlement curve for ground penetration. Finally, a method of evaluating the risk of mobile-crane overturning is proposed by using the maximum value of both the supporting surface’s failure risk and the kinetic risk due to ground penetration.
Get full access to this article
View all available purchase options and get full access to this article.
References
Beliveau, Y., Dixit, S., and Dal, T. (1993). “Dynamic damping of payload motion for cranes.” J. Constr. Eng. Manage., 119(3), 631–644.
Bernold, L. E., Lorenc, S. J., and Luces, E. (1997). “Intelligent technology for truck crane accident prevention.” J. Constr. Eng. Manage., 123(3), 276–284.
British Standards Institution (BSI). (1991a). “Code of practice for safe use of crane, Part 2: Inspection, testing and examination.” BS 7121, 3–6.
British Standards Institution (BSI). (1991b). “Code of practice for safe use of crane, Part 2: Inspection, testing and examination.” BS 7121, 13–14.
British Standards Institution (BSI). (2000). “Code of practice for safe use of crane, Part 3: Mobile crane.” BS 7121, 14–16.
Cook, R. D., Malkus, D. S., and Plesha, M. E. (1989). “Concept and applications of finite element analysis,” 3rd Ed., Wiley, New York, 408–409.
Finnie, I. M. S. (1993). “Performance of shallow foundations in calcareous soil.” Dissertation, Doctor of Philosophy, Univ. of Western Australia.
Hambly, E. C. (1990). “Overturning instability.” J. Geotech. Eng., 116(4), 704–709.
Hambly, E. C. (1985). “Punch-through instability of jack-up on seabed.” J. Geotech. Eng., 111(5), 545–550.
Ingram, W. B., and Dutt, R. N. (1987). “Discussion of ‘Punching through instability of jack up on seabed’ by E. C. Hambly.” J. Geotech. Eng., 113(4), pp. 402–403.
International Organization for Standardization (ISO). (1991). “Mobile cranes, determination of stability.” ISO 4305, 1–3, Genova, Switzerland.
Ito, H. (1994). “General statement of mobile crane.” Kajima shuppan-kai, 47–49 (in Japanese), Minato-ku, Tokyo, Japan.
Japan Crane Association (JCA). (1998). “Japanese legislation for cranes and mobile cranes.” 30, 138, and 139, Shinagawa-ku, Tokyo, Japan.
Japan Crane Association (JCA). (2002). “A year book of crane in 1994 edition.” 39 (in Japanese), Shingawa-ku, Tokyo, Japan.
Labour Standard Bureau, Ministry of Labour, Japan. (1978). “Writ of Ministry of Labour No.45.” Ordinance on Safety of Crane and Similar Equipment (in Japanese), Chiyoda-ku, Tokyo, Japan.
Maeda, Y., and Inoue, I. (1973). “Physical modeling of the dynamic limiting equilibrium.” Journal of Japan Society for Safety Engineering, 12(3), 198–202 (in Japanese).
Rajagopalan, K. S. (1988). “Supports for traveling cranes: Case history.” J. Constr. Eng. Manage., 114(1), 114–120.
Standards Association of Australia (SAA). (1993a). “Cranes-safe use, Part 1: General requirements.” AS2550.1-1993, 9 and 32, Homebush, New South Wales, Australia.
Standards Association of Australia (SAA). (1993b). “Cranes-safe use, Part 5: Mobile and vehicle-loading cranes.” AS2550.5-1993, 4 and 5, Homebush, New South Wales, Australia.
Standards Association of Australia (SAA). (1995). “Cranes (including hoist and winches), Part 5: Mobile and vehicle-loading cranes.” AS1418.5-1995, 8–23, Homebush, New South Wales, Australia.
Tamate, S., Horii, N., Toyosawa, Y., Suemasa, N., and Takano, Y. (1998a). “Instability of mobile cranes due to penetration of outriggers.” J. Geotech. Eng., 596/3–43, 163–174 (in Japanese).
Tamate, S., Horii, N., Toyosawa, Y., Suemasa, N., and Takano, Y. (1998b). “Simulating the overturning of mobile cranes due to penetration of outriggers.” Proc., Centrifuge 98, 901–906.
U.S. Department of Labor, Occupational Safety and Health Administration. (1994). “Mobile crane inspection guidelines for OSHA compli-ance officers, Chapter 2: Mobile cranes, Section 2.1: Lifting principles.” ⟨http://www.osha.gov/SLTC/cranehoistsafety/mobilecrane/mobilecrane.html⟩ (Aug. 22, 2003).
U.S. Department of Labor, Occupational Safety and Health Administration. (2000). “Part 1910—Occupational safety and health standards, subpart N—Material handling and storage, 1910.180—Crawler, locomotive and truck crane.” ⟨http://www.osha.gov/pls/oshaweb/owadisp.show̱document?p̱table=STANDARDS&p̱id=9831⟩ (Aug. 22, 2003).
Zaretsky, A. A., and Shapiro, H. I. (1997). “Overturning stability of a free standing crane under dynamic loading.” SAE Technical Paper Series, Society of Automotive Engineers, No. 972721, 1–9, United States.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Aug 26, 2003
Accepted: Jun 28, 2004
Published online: Jun 1, 2005
Published in print: Jun 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.