Continuous Value Enhancement Process
Publication: Journal of Construction Engineering and Management
Volume 131, Issue 12
Abstract
The demand for sustainable buildings is an important emerging trend in the building industry. However, the task of delivering these facilities is more difficult than for traditional projects and existing project management techniques struggle to handle the high levels of complexity present. A process-based model, called the continuous value enhancement process (CVEP), was developed to systematically generate and evaluate project alternatives leading to high performance solutions that improve project performance and increase levels of sustainability. Developed specifically to address the challenges facing the Pentagon renovation—which will become the world’s largest green office renovation—CVEP is tested to research its ability to support project management decision making in ways that elevate sustainability and project performance. The key contributions of this model include the integration of sustainable objectives into project management practices, and the development of a metric for measuring the quality and focus of project team decisions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Arditi, D., Elhassan, A., and Toklu, C. (2002). “Constructability analysis in the design firm.” J. Constr. Eng. Manage., 128(2), 117–126.
Austin, S. A., and Thomson, D. S. (1999). “Integral value engineering in design.” Proc., COBRA 99 Conf., Salford, U.K., September, 1999, 1–10.
Construction Industry Institute (CII). (1986). “Constructability—A primer.” Publication 3-1, Austin, Tex.
Construction Industry Institute (CII). (1993). “Constructability implementation guide.” CII Publication 34-1, Austin, Tex.
Dell’Isola, A. (1997). Value engineering: Practical applications…for design, construction, maintenance and operations, RSMeans CMD, Kingston, Mass.
Eisenberg, D., and Reed, W. (2003). “Regenerative design: Toward the re-integration of human systems with nature.” The Pittsburgh Papers: Best of Greenbuild 2003, Pittsburgh, 18–24.
Federal Facilities Council. (2001). “Sustainable federal facilities: A guide to integrating value engineering, life-cycle costing, and sustainable development.” Federal Facilities Council Technical Rep. No. 142, National Research Council, Washington, D.C.
Fisher, M., and Tatum, C. B. (1997). “Characteristics of design-relevant constructability knowledge.” J. Constr. Eng. Manage., 123(3), 253–260.
Green, S., and Popper, P. (1990). Value engineering: The search for unnecessary cost, Charter Institute of Building, Ascot., U.K.
Horman, M. J. (2000). “Process dynamics: buffer management in building project operations.” PhD dissertation, The Univ. of Melbourne, Melbourne, Australia.
Kobet, B., Powers, W., Lee, S., Mondor, C., and Mondor, M. (1999). “Guidelines for creating high-performance green buildings.” Pennsylvania Department of Environmental Protection, Harrisburgh, Pa.
Mendler, S. (2001). “The greening curve: Lessons learned in the design of the new EPA Campus in North Carolina.” EPA 220/K-02-001, U.S. Environmental Protection Agency, Washington, D.C.
Mendler, S., and Odell, W. (2000). The HOK guidebook to sustainable design, Wiley, New York.
Powell, J. (1999). “Action learning for continuous improvement and enhanced innovation in construction.” Proc., 7th Conf. of the International Group for Lean Construction (IGLC-7), Berkeley, Calif.
Pulaski, M., Hewitt, C., Horman, M., and Guy, B. (2003a). “Design for deconstruction: Material reuse and constructability.” The Pittsburgh Papers: Best of Greenbuild 2003, Pittsburgh, 74–81.
Pulaski, M., and Horman, M. (2003). “Constructability knowledge management in sustainable design.” Proc., CIB 2003 International Conf. on Smart and Sustainable Built Environment, Brisbane, Australia.
Pulaski, M., Pohlman, T., Horman, M., and Riley, D. (2003b). “Synergies between sustainable design and constructability at the pentagon.” Proc., ASCE Construction Research Congress, Honolulu.
Reed, W. (2002). “Integrated design.” Building Standards, March–April, 20–24.
Riley, D., Pexton, K., and Drilling, J. (2003). “Defining the role of contractors on green building projects.” Proc., 2003 Construction Research Congress, Honolulu.
Santos, A., Powell, J., and Formoso, C. (2000). “Setting stretch targets for driving continuous improvement in construction.” Work Study, 49(2), 50.
Slaughter, S. (1998). “Models of construction innovation.” J. Constr. Eng. Manage., 124(3), 226–331.
Smith, A. (2003). “Building momentum: National trends and prospects for high-performance green buildings,” U.S. Green Building Council, Washington, D.C.
Soibelman, L., Liu, L., Kirby, J., East, W., Caldas, C., and Lin, K. (2003). “Design review checking system with corporate lessons learned.” J. Constr. Eng. Manage., 129(5), 475–484.
Spear, S., and Bowen, S. K. (1999). “Decoding the DNA of the Toyota production system.” Harvard Bus. Rev., September–October, 96–106.
Staub-French, S. (2003). “Providing cost and constructability feedback to designers.” Proc., 2003 Construction Research Congress, Honolulu.
Watson, D. (1996). Environmental design Charrette workbook, The American Institute of Architects, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Mar 23, 2004
Accepted: May 18, 2005
Published online: Dec 1, 2005
Published in print: Dec 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.