Exterior Cladding Methods: A Technoeconomic Analysis
Publication: Journal of Construction Engineering and Management
Volume 122, Issue 3
Abstract
The continual development in building components and the significant increase in the proportion of high-rise building lead to an extended use of new methods of exterior cladding. The selection of a cladding system incorporates various aspects, among which the more significant are: physical and visual performance, life span of the cladding, and economic considerations. This paper focuses on the systematic examination and comparison of four different categories of cladding methods based on technological and economic criteria. The categories of claddings are: cementitious stucco, synthetic finish stucco, ceramic, and natural stone. The economic analysis, based on life-cycle cost (LCC) and on life-span estimates was arrived at by an analysis following on-site observations. It is shown that in “noncorrosive” environments, cementitious stucco is preferable to alternatives, particularly in low-rise buildings. In “corrosive” environments, synthetic and ceramic mosaic claddings are preferable to the alternatives examined.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, E. (1990). Fundamentals of building construction materials and methods . John Wiley & Sons, Inc., New York, N.Y.
2.
Ashurst, J., and Ashurst, N. (1989). Practical building conservation—mortars, plasters and renders . Gower Technical Press Ltd., Hants, England.
3.
British Standard Institution. (1976). “Code of practice, external rendered finishes.”British Standard 5262, London, England.
4.
Brookes, A. J. (1990). Cladding of buildings . Longman Group (FE) Ltd., London, England.
5.
Bull, J. W. (ed.) (1993). Life cycle costing for construction. Blackie Academic & Professional, Glasgow, Scotland.
6.
Calenzani, L. (1990). The architect handbook of marble granite and stone. Vol 2: Overview of the Italian stone industry . Van Nostrand Reinhold, New York, N.Y.
7.
Corbella, E. (1990). The architect handbook of marble granite and stone. Vol. 1: Technical guide . Van Nostrand Reinhold, New York, N.Y.
8.
Dell'Isola, A. J. (1983). Life cycle cost data . McGraw-Hill Book Co., Inc., New York, N.Y.
9.
Dinsdale, A. (1973). “External ceramic tiling.”Proc., British Ceramic Res. Symp., British Ceramic Res. Assn., Stoke-On-Trent, England, 1–12.
10.
Friedman, J. P., and Harris, J. C. (1985). “A critical comparison of office building facade materials: brick versus glass.”Proc., North American Masonry, 44.1–44.16.
11.
Italian Association of Ceramic Tiles Manufacturers. (1979). Italian ceramic floor and wall tile . Assopiasirelle, Modena, Italy.
12.
Means. (1995). Means site work cost data . Robert Snow Means Co., Inc., Kingston, Mass.
13.
Monks, W. (1992). External rendering. British Cement Assn., Wexham Springs, England.
14.
Puterman, M. (1990). “Durability and deterioration of exterior building paints—characterization and testing specification.”Tech. Rep., Nat. Build. Res. Inst., Technion—Israel Inst. of Technol., Haifa, Israel (in Hebrew).
15.
Shohet, I. M. (1995). “Comparison of exterior cladding systems in building.”Tech. Rep., Nat. Build. Res. Inst., Technion—Israel Inst. of Technol., Haifa, Israel (in Hebrew).
16.
Soroka, I., and Carmel, D.(1987). “Durability of external renderings in a marine environment.”Durability of Build. Mat., 5(1), 61–72.
17.
Taylor, H. P. J. (1992). Precast concrete cladding . British Library Cataloguing in Publication Data, London, England.
18.
Uher, T. E.(1985). “Wall tiling on calcium silicate masonry.”J. Australian Ceramic Soc., 21(2), 35–40.
19.
Yegerman, H., Baum, H., and Carmel, D. (1990). “The effect of the distance from the sea shore on the amount of chlorides in the exterior mortar.”Tech. Rep., Nat. Build. Res. Inst., Technion—Israel Inst. of Technol., Haifa, Israel (in Hebrew).
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Sep 1, 1996
Published in print: Sep 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.