Developing Acceptance-Sampling Methods for Quality Construction
Publication: Journal of Construction Engineering and Management
Volume 121, Issue 2
Abstract
An acceptance-sampling method plays an important role in designing quality-assurance (QA) specifications. It applies statistics to specify the requirements of (1) how many measurements are needed; and (2) how to make an acceptance or rejection decision based on measured data. The key function of the acceptance-sampling method is to guide the decision between accepting or rejecting the quality of the products. The purpose of this paper is to present four acceptance-sampling methods, including (1) variable–single-sampling method; (2) quality-index–sampling method; (3) attribute–double-sampling method; and (4) attribute–proportion-sampling method. In this paper, the theories will be derived and the applications of the four developed quality-acceptance–sampling methods will be described. The advantages and disadvantages of using different sampling methods are compared. The application of the developed quality-acceptance-sampling methods is illustrated using bridge-painting examples.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abdum-Nur, A. E. (1981). “Contractual relationships—An essential ingredient of the quality-assurance systems.”Transp. Res. Rec. 792, Transp. Res. Board, Washington, D.C., 1–2.
2.
“Asphalt cost control without quality loss.” (1990). Better Roads, 60(2), 36–38.
3.
Blaschke, B. C. (1989). “Specifications and constructibility.”Proc., Constr. Cong. I—Excellence in the Constr. Proj., ASCE, New York, N.Y., 87–92.
4.
Bower, D. (1991). “Task force on innovative contracting practices.”Transp. Res. Circular, No. 386, Transp. Res. Board, Washington, D.C., 28–30.
5.
Burati, J. L. Jr., and Hughes, C. S. (1990). Highway material engineering module I: Material control and acceptance—quality assurance . U.S. Dept. of Transp., Washington, D.C.
6.
Burr, W. (1976). Statistical quality control method . Marcel Dekker Inc., New York, N.Y.
7.
Chang, L.-M., and Hsie, M. (1992a). “Development of quality assurance specification for steel bridge painting contract.”Joint Hwy. Res. Proj., FHWA/IN/JHRP/92/10, Purdue Univ., West Lafayette, Ind.
8.
Chang, L.-M., and Hsie, M. (1992b). “Realistic specifications for steel bridge painting, materials.”Perf. and Prevention of Deficiencies and Failures: 1992 Mat. Engr. Cong., ASCE, New York, N.Y. 299–310.
9.
Erickson, J.(1989). “Meeting the quality management issue on highway construction.”J. Profl. Issues in Engrg., ASCE, 115(2), 162–167.
10.
Gendell, D. S., and Masuda, A.(1988). “Highway specifications: Link to quality.”J. Profl. Issues in Engrg., ASCE, 114(1), 17–26.
11.
Gentry, C., and Yrjanson, W. A. (1987). “Specifications for quality control: A case study.”Transp. Res. Rec. 1126, Transp. Res. Board, Washington, D.C., 37–41.
12.
Harp, D. (1991). “Task force on innovative contracting practices.”Transp. Res. Circular, No. 386, Transp. Res. Board, Washington, D.C., 43–46.
13.
Lynn, C. (1989). “Development of a contract quality assurance program within the Department of Transportation.”Transp. Res. Rec. 1234, Transp. Res. Board, Washington, D.C., 39–47.
14.
Neter, J., Wasserman, W., and Whitmore, G. A. (1988). Applied statistics . Allyn and Bacon, Boston, Mass.
15.
O'Brien, J. J. (1989). Construction inspection handbook: Quality assurance quality control. Van Nostrand Reinhold, New York, N.Y.
16.
Tewari, N.(1986). “Quality assurance through plant management for flexible road construction project.”Indian Highways, 14(12), 34–41.
17.
Wadsworth, M. H., Stephens, K. S. A., and Godfrey, B. (1986). Modern method for quality control and improvement . John Wiley & Sons, Inc., New York, N.Y.
18.
Weed, M. R. (1989). Statistical specification development, 2nd Ed., New Jersey DOT, Trenton, N.J.
19.
Weseman, W. A., and Erickson, J. K. (1988). “Future of quality assurance.”Engineering 21st century highways. Hwy. Div., ASCE, New York, N.Y., 120–127.
20.
Willenbrock, H. J., and Kopac, A. P. (1977). “Development of price-adjustment systems for statistically based highway construction specifications.”Transp. Res. Rec. 652, Transp. Res. Board, Washington, D.C., 52–58.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Jun 1, 1995
Published in print: Jun 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.