Modeling Human Performance in Reinforced Concrete Beam Construction
Publication: Journal of Construction Engineering and Management
Volume 119, Issue 1
Abstract
A significant portion of performance failures are due to human error in the construction stage of a structural engineering project. Statistical studies indicate that the construction of in‐situ reinforced concrete elements is most prone to error, and that most errors are committed by contractors (either site staff or workmen). Results are reported herein of a survey investigating the error rate and error magnitude of contractor construction errors, and the frequency of engineering inspections and their influence on construction errors. The survey recipients were practicing structural engineers. Probabilistic models have been proposed for the distribution of error rates and error magnitudes, and include within them the influence of inspections. It was found that engineering inspections reduced the initial on‐site construction error content by approximately two orders of magnitude. The models provide construction task performance information that can be incorporated into a probabilistic risk analysis of reinforced‐concrete construction.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Apostolakis, G. (1982). “Data analysis in risk assessments.” Nuclear Engrg. and Design, 71, 375–381.
2.
Australian concrete structures code AS3600. (1988). Standards Assoc. of Australia, Sydney, Australia.
3.
Brown, C. B., and Yin, X. (1988). “Error in structural engineering.” J. Struct. Engrg., 114(11), 2575–2593.
4.
Building code requirements for reinforced concrete ACI 318‐83. (1986). Am. Concrete Inst., Detroit, Mich.
5.
Building code of Australia. (1990). Australian Uniform Build. Regulations Co‐Ordinating Council, Canberra, ACT, Australia.
6.
Davis, K., Ledbetter, W. B., and Burati, J. L. (1989). “Measuring design and construction quality costs.” J. Constr. Engrg. and Mgmt., ASCE, 115(3), 385–400.
7.
Eldukair, Z. A., and Ayyub, B. M. (1991). “Analysis of recent U.S. structural and construction failures.” J. Perf. Constr. Fac., ASCE, 5(1), 57–73.
8.
Ellingwood, B. (1987). “Design and construction error affects on structural reliability.” J. Struct. Engrg., ASCE, 113(2), 409–422.
9.
Ford, J. S. (1984). “Construction inspection—can you afford not to do it?”, Professional inspection of construction, S. B. Quinn, ed., ASCE, New York, N.Y., 27–41.
10.
Fraczek, J. (1979). “ACI survey of concrete structure errors.” Concrete Int., 1(12), 14–20.
11.
Ingles, O. G., and Nawar, G. (1983). “Evaluation of engineering practice in Australia.” IABSE Workshop on Quality Assurance within the building process, Int. Assoc. for Bridge and Struct. Engrg., Zurich, Switzerland, 111–116.
12.
Jubelin, K. (1983). “Quality supervision of on‐site building operations.” Seminar: quality supervision of on‐site building operations, Build. Sci. Forum of Australia, Sydney, N.S.W., 1–6.
13.
McCaffer, R. (1989). “An historical perspective.” Quality assurance in construction, Institute of Civil Engineers (ICE), Thomas Telford, London, England.
14.
Melchers, R. E. (1978). “The influence of control processes in structural engineering.” Inst. of Civ. Engrs., Part 2, 65, 791–807.
15.
Moody, R. S. (1986). “The communication gap—where does the buck stop.” Seminar: building science—passed or failed?, Building Science Forum of Australia, Sydney, N.S.W.
16.
Peterson, C., and Miller, A. (1964). “Mode, median, and mean as optimal strategies.” J. of Experimental Psychology, 68(4), 363–367.
17.
“Quality Systems.” (1987). ISO 9000 to ISO 9004‐1987, International Standards Organization.
18.
Quinn, S. B. (1984). “Professional inspection and construction—who needs it!” Professional inspection of construction, S. B. Quinn, ed., ASCE, New York, N.Y., 1–3.
19.
Reactor safety study: an assessment of accident risks in U.S. nuclear power plants. (1975). WASH‐1400, NUREG‐75/014, U.S. Nuclear Regulatory Commission, Washington, D.C.
20.
Seaver, D. A., and Stillwell, W. G. (1983). “Procedure for using expert judgement to estimate human error probabilities in nuclear power plant operations.” NUREG/CR‐2743, U.S. Nuclear Regulatory Commission, Washington, D.C.
21.
Stewart, M. G., and Melchers, R. E. (1989a). “Error control in member design.” Struct. Safety, 6(1), 11–24.
22.
Stewart, M. G., and Melchers, R. E. (1989b). “Checking models in structural design.” J. Struct. Engrg., ASCE, 115(6), 1309–1324.
23.
Stewart, M. G. (1991). “The occurrence and detection of errors in reinforced concrete beam construction.” Research rep. No. 063.05.91, Dept. of Civ. Engrg. and Surveying, The University of Newcastle, Newcastle, Australia.
24.
Stewart, M. G. (1992). “A human reliability analysis of reinforced concrete beam construction.” Civ. Engrg. Systems, 9.
25.
Swain, A. D., and Guttman, H. E. (1983). “Handbook of human reliability analysis with emphasis on nuclear power plant applications.” NUREG/CR‐1278, U.S. Nuclear Regulatory Commission, Washington, D.C.
26.
Turkstra, C., Knoll, F., and Allen, D. E. (1983). “Organization of the design‐construction process.” IABSE workshop on quality assurance within the building process, Int. Assoc. for Bridge and Struct. Engrg., Zurich, Switzerland, 47, 77–86.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Aug 28, 1992
Published online: Mar 1, 1993
Published in print: Mar 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.