Integration of Simulation with Expert Systems
Publication: Journal of Construction Engineering and Management
Volume 116, Issue 3
Abstract
This paper investigates the integration of simulation with expert systems. Several recent engineering research projects in this field are described. Relevant research in construction is discussed and potential benefits of integrated systems are explored. Integrating simulation with expert systems can produce powerful analytical tools with immediate potential use in construction. A prototype system is developed by integrating an expert‐system shell with a popular construction simulation software. The system developed allows the user to choose suitable earth‐moving equipment (scraper versus truck, shovel versus bulldozer) under a given set of job conditions, select an appropriate simulation file, perform simulation analysis, and output cost and production rates. The expert system acts as an interface between the user and the simulation software. The user can benefit from the power of simulation analysis without having to be a simulation expert. Several issues are identified in the course of system development and described in the paper. An example is presented to demonstrate the system's application. Possible future enhancements and extensions are suggested.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Caterpillar performance handbook. (1984). 15th Ed., Caterpillar Inc., Peoria, Ill. dBSAE III‐plus user's guide. (1986). Ashton Tate, Inc., Torrence, Calif.
2.
Dombroski, E. J. (1987). “Knowledge‐based simulation and the concept of an intelligent simulation object.” Proc. IEEE Systems, Man and Cybernetics, Institute of Electrical and Electronics Engineers, 1, 140–143.
3.
Elmaghraby, A. S., Jagannathan, V., and Ralston, P. (1985). “An expert system for chemical process control.” AI and simulation, W. M. Homes, ed., Soc. for Comp. Simulations, San Diego, Calif., 62–64.
4.
Erickson, S. A., Jr. (1986). “Fusing AI and simulation in military modeling.” Simulation Series, 18(1), 140–150.
5.
Gilmer, J. B., Jr. (1987). “The need for improved modeling techniques for knowledge‐based simulations.” Proc. IEEE Systems, Man and Cybernetics, Institute of Electrical and Electronics Engineers, 1, 281–283.
6.
Halpin, D. W. (1973). “An investigation of the use of simulation networks for modeling construction operations,” dissertation presented to the University of Illinois, Urbana, Ill., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
7.
Harmon, P., and King, D. (1985). Artificial intelligence in business systems: Expert systems. John Wiley and Sons, New York, N.Y.
8.
Hill, T. R., and Roberts, S. D. (1987). “A prototype knowledge‐based simulation support system.” Simulation, 48(4), 152–161.
9.
Kalk, A. (1980). “INSIGHT: Interactive simulation of construction operations using graphical techniques.” Technical Report No. 238, Constr. Inst., Stanford Univ., Stanford, Calif.
10.
Kameny, I., Cammarata, S., and Rethenberg, J. (1987). “Concept for an integrated development environment for knowledge‐based simulations.” Proc. IEEE Systems, Man and Cybernetics, Institute of Electrical and Electronics Engineers, 1, 269–273.
11.
Kim, S. S., et al. (1986). “Survey of the state‐of‐the‐art expert/knowledge based systems in civil engineering.” USA‐CERL Special Report P‐87101, Constr. Engrg. Res. Lab., Urbana, Ill., Oct.
12.
Kornell, J. (1987). “Reflections on using knowledge‐based systems for military simulation.” Simulation, 48(4), 144–148.
13.
Kostem, C., and Maher, M. L., eds. (1986). Expert systems in civil engineering. ASCE, New York, N.Y.
14.
Means heavy construction cost data. (1989). R. S. Means, Inc., Kingston, Mass.
15.
Morgeson, J. D., Colston, E., and Bums, J. R. (1987). “Relevant literature in support of knowledge‐based simulation models.” Proc. IEEE Systems, Man and Cybernetics, Institute of Electrical and Electronics Engineers, 1, 130–134.
16.
Nunnally, S. W. (1977). Managing construction equipment. Prentice‐Hall Inc., Englewood Cliffs, N.J.
17.
Paulson, B. C., et al. (1983). “Simulation and analysis of construction operations.” J. Tech. Topics in Civ. Engrg., ASCE, 109(2), 89–104.
18.
Pereira, F. (1983). C‐Prolog user's manual. Dept. of Arch., Univ. of Edinburgh, Edinburgh, U.K., Mar.
19.
Pritsker, A. A. B. (1986). Introduction to simulation and SLAM II. 3rd Ed., Systems Publishing Corp., West Lafayette, Ind.
20.
Reddy, R. (1987). “Epistemology of knowledge‐based simulation.” Simulation, 48(4), 162–166.
21.
Ritchie, S. G., et al. (1987). “Surface condition expert system for pavement rehabilitation planning.” J. Transp. Engrg., ASCE, 113(2), 155–167.
22.
Roberts, S. D. (1986). Interactive INSIGHT simulation system. SysTech, Inc., Indianapolis, Ind.
23.
Sotoodeh‐Khoo, H. (1987). “Integrated real‐time expert systems and sensor based data acquisition in the automation of construction equipment and operations,” thesis presented to Stanford University, at Stanford, Calif., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
24.
Sotoodeh‐Khoo, H., and Paulson, B. C., Jr. (1989). “Sensors and expert systems in production optimization of earthmoving scrapers.” Proc. 6th Conf. on Computing in Civ. Engrg., ASCE, 303–312.
25.
Teicholz, P. (1963). “A simulation approach to the selection of construction equipment.” Technical Report 26, Constr. Inst., Stanford Univ., Stanford, Calif.
26.
Touran, A. (1989). “Expert system/simulation integration for modeling construction operations.” Proc. 6th Conf. on Computing in Civ. Engrg., ASCE, 330–337.
27.
Touran, A. (1986). “Sludge transportation for the city of Longmont wastewater treatment plant.” Report, submitted to Wastewater Committee, Longmont, Colo., Sep.
28.
Touran, A., and Asai, T. (1987). “Simulation of tunneling operations.” J. Constr. Engrg. and Mgmt., ASCE, 113(4), 554–568.
29.
Touran, A., and Taher, K. H. (1988). “Optimum fleet size determination by queueing and simulation.” Constr. Mgmt. and Economics, 6(4), winter, 295–306.
30.
Waterman, D. A. (1986). A guide to expert systems. Addison Wesley Publishing Co., Reading, Mass.
31.
Willenbrock, J. (1972). “Estimating costs of earthwork via simulation.” J. Constr. Div., ASCE, 98(1), 48–60.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 116 • Issue 3 • September 1990
Pages: 480 - 493
Copyright
Copyright © 1990 ASCE.
History
Published online: Sep 1, 1990
Published in print: Sep 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.