The Impact of Density Differences on the Hydraulic Design of Leveling Systems: The Case of New Large Sea Locks in IJmuiden and Terneuzen
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 150, Issue 1
Abstract
Recent constructions of large sea locks in the Netherlands at IJmuiden and Terneuzen have been accompanied by extensive hydraulic research, including physical scale model tests which took into account the effects of density differences across the lock heads during leveling operations. The case study presented here compares the situations and results from the studies of the two locations, and shows the importance of density effects in an accurate assessment of the hydrodynamic forces on the vessels and subsequently the forces on the mooring lines. Supposedly small differences in the local boundary conditions at the two locations lead to very different results, owing primarily to the differences in propagation of the density currents. Numerical models do not as yet predict this with sufficient accuracy. This further underlines the importance of doing extensive preliminary hydraulic investigations when designing large new shipping locks.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request. In particular, the measurements of waterlevels, density profiles, valves positions, and forces from the model tests presented here are available upon request.
References
Belzner, F., F. Simons, and T. Thorenz. 2018. “An application-oriented model for lock filling processes.” In Proc., PIANC World Congress, 383–401. Brussels, Belgium: PIANC.
Calvo Gobetti, L. E. 2013. “Design of the filling and emptying system of the new panama canal locks.” J. Appl. Water Eng. Res. 1 (1): 28–38. https://doi.org/10.1080/23249676.2013.827899.
Daniel, R. A., and I. Hermans. 2020. “Belgian sea locks – proven solution for a safe navigation access to harbors.” Inzynieria Morska i Geotechnika 4: 188–203.
de Loor, A., O. Weiler, and W. Kortlever. 2013. “Lockfill: A mathematical model for calculating forces on a ship while levelling through the lock head.” In Proc., PIANC SMART Rivers Conf. Brussels, Belgium: PIANC.
De Mulder, T., K. Verelst, J. B. Vercruysse, W. De Cock, and M. Haegeman. 2010. “On hawser force criteria for navigation lock design: Case study of maritime locks in port of antwerp.” Proc., Book of Abstracts, 32th PIANC World Congress, 290a–290b. Brussels, Belgium: PIANC.
Delft Hydraulics. 1958. Scaling rules for research on density currents. [In Dutch.] Rep. No. R0937. Delft, Netherlands: Delft Hydraulics.
Jongeling, T. 2014. Zeetoegang ijmond: Nieuwe zeesluis, analyse van het nivelleringssysteem met behulp van rekenprogramma lockfill [sea entrance ijmond: New sea lock, analysis of the levelling system using the lockfill calculation programme]. [In Dutch.] Rep. No. Utrecht, Netherlands: Rijkswaterstaat.
Kortlever, W. C. D., A. J. Van der Hout, T. S. D. O’Mahoney, A. de Loor, and T. Wijdenes. 2018. “Levelling the new sea locks in the Netherlands: Including the density difference.” In Proc., Book of Abstracts, 34th PIANC World Congress, 127–144. Brussels, Belgium: PIANC.
Monish, B. M. 1938. “Discussion of the passage of turbid water through lake mead.” Trans. Am. Soc. Civ. Eng. 103 (1): 751–755.
Nogueira, H. I. S., P. Van der Ven, T. O’Mahoney, A. De Loor, A. J. Van der Hout, and W. Kortlever. 2018. “Effect of density differences on the forces acting on a moored vessel while operating navigation locks.” J. Hydraul. Eng. 144 (6): 04018021. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001445.
Nogueira, I. S., T. O’Mahoney, A. van der Hout, and W. Kortlever. 2017. “Effect of density differences on the forces acting on a vessel during locking operations.” In Proc., 37th IAHR World Congress, 3710–3719. Madrid, Spain: International Association for Hydro-Environment Engineering and Research (IAHR).
Nogueira, I. S., A. van der Hout, and W. Kortlever. 2019. “Hydraulic research for the new lock in terneuzen.” In Proc., 38th IAHR World Congress, 4131–4143. Madrid, Spain: International Association for Hydro-Environment Engineering and Research (IAHR).
O’Mahoney, T. S. D., and A. De Loor. 2015. “Computational fluid dynamics simulations of the effects of density differences during the filling process in a sea lock.” In Proc., 7th PIANC SMART Rivers Conf. Brussels, Belgium: PIANC.
PIANC. 2009. Innovations in Navigation Lock Design. PIANC Report No 106 by InCom WG 29. Brussels, Belgium: PIANC Secrétariat Général.
Rijkswaterstaat. 2000. Design of Locks: Part 1. Utrecht, Netherlands: Ministry of Transport, Public Works and Water Management.
Rijkswaterstaat. 2010. Technisch achtergronddocument - project zeetoegang ijmond. [In Dutch.] Rep. No. Utrecht: Ministerie van Verkeer en Waterstaat.
Ringers, J. A., and J. Jitta. 1927. Proeven en beschouwingen welke geleid hebben tot het vaststellen van het systeem van vulling en lediging van de kolk der nieuwe schutsluis te ijmuiden [In Dutch.] Rep. No. 23. Netherlands: Rapporten en mededeelingen van den Rijkswaterstaat.
Thorenz, C. 2018. “Can better turbulent mixing reduce density induced ship forces during lockage?” In Proc., Book of Abstracts, 34th PIANC World Congress, 190. Brussels, Belgium: PIANC.
Thorenz, C., and L. Schulze. 2021. “Numerical investigations of ship forces during loackage.” J. Coastal Hydraul. Struct. 1. https://doi.org/10.48438/jchs.2021.0005.
Van der Hout, A. J., H. I. S. Nogueira, W. C. D. Kortlever, and A. D. Schotman. 2018. “Scale model research and field measurements for two new large sea locks in the Netherlands.” In Proc., Book of Abstracts, 34th PIANC World Congress, 402–417. Brussels, Belgium: PIANC.
Van Kleef, E. A. 2010. Troskrachtcriteria in sluizen: Rekenmodel voor scheepsbewegingen en troskrachten [force criteria in locks: Mathematical model for ship movement and mooring forces]. [In Dutch.] Rep. No. Q0225. Delft, Netherlands: Delft Hydraulics.
Vantorre, M., et al. 2016. “A comparison of experimental and numerical behaviour characteristics of a ship entering a lock using benchmark test data.” Int. J. Marit. Eng. 158 (A2): A79–A90.
Verelst, K., J. Vercruysse, T. De Mulder, T. Fahner, W. De Cock, and H. Pauwels. 2015. “Hydraulic design of a filling emptying system for the new Royers lock in the Port of Antwerp (Belgium).” In Proc., 36th IAHR World Congress, 4563–4574. Madrid, Spain: International Association for Hydro-Environment Engineering and Research (IAHR).
Vrijburcht, A. 1991. “Forces on ships in a navigation lock induced by stratified flows.” Ph.D. thesis, Dept. of Civil Engineering and Geosciences, TU Delft.
Vrijer, A. 1991. “Criteria for the mooring forces of ocean-going ships in locks.” In Proc., 17th IAHR Congress. Madrid, Spain: International Association for Hydro-Environment Engineering and Research (IAHR).
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jan 2, 2023
Accepted: Jun 7, 2023
Published online: Sep 18, 2023
Published in print: Jan 1, 2024
Discussion open until: Feb 18, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.