Optimized Turning Basin Design for Inland Waterways
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 149, Issue 4
Abstract
Concept design guidelines for ship turning basins are often not met in practice due to environmental, economic, or geotechnical restrictions. In these cases, a detailed design procedure is followed to develop an optimized turning basin geometry within the environmental constraints. Then, real-time ship maneuvering simulations are used to evaluate the maneuvers in the proposed geometry. However, such a detailed design procedure is costly, especially if a large number of simulations are required. To restrict the number of simulations, the waterway authority [Voies navigables de France (VNF)] ordered a study to find a generic and optimal design for a turning basin which could be suitable for the upgrade in the northern part of their inland waterway network. Therefore, the turning maneuvers for two typical inland navigation vessels were simulated in real time under different hydrometeorological conditions. This study was conducted in three stages. First, maneuvers in traditional circular and trapezoidal turning basins of different sizes were executed and analyzed. Second, optimized turning basin geometries were developed. Finally, the turning maneuvers in those optimized geometries were analyzed. Based on the results of this analysis, a stepwise approach was proposed to select an optimized turning basin geometry that was based on the conditions present on site. This stepwise approach for the design of turning basins could reduce the real-time simulations that are required when upgrading a waterway network.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was commissioned by VNF. The simulation studies carried out to develop optimized geometries of turning basins on the Nord-Pas-de-Calais Class V network were financed within the framework of the Seine-Escaut project (MIE cofinancing). The authors wish to thank the Flemish skippers, particularly Julien Vanhoyweghen, who shared their experience and contributed significantly to the proposed solutions to tackle the accessibility bottlenecks in turning basins.
References
Bour, N., et al. 2019. “Multifunctional and multimodal role of waterways: Waterborne, land development and water resources: the case of Seine-Scheldt.” In Smart Rivers 2019 Conf., 19–21. Brussels, Belgium: PIANC.
CESNI. 2021. European standard laying down technical requirements for inland navigation vessels. Strasbourg, France: CESNI.
Eloot, K., G. Delefortrie, and M. Vantorre. 2012. “Inland navigation: assessing the manoeuvring behaviour for real-time simulation purposes.” In Proc., Int. Conf. on Marine Simulation and Ship Manoeuvrability. Harlingen, Netherlands: International Marine Simulator Forum.
Kabir, M., M. J. Kang, X. Wu, and M. Hamidi. 2022. “Study on U-turn behavior of vessels in narrow waterways based on AIS data.” Ocean Eng. 246: 110608. https://doi.org/10.1016/J.OCEANENG.2022.110608.
Kim, S.-W., Y.-S. Lee, and Y.-S. Park. 2012. “A study on the size of turning basin for vessels of arrival & departure in the berths.” J. Fish. Mar. Sci. Educ. 24 (6): 872–883. https://doi.org/10.13000/JFMSE.2012.24.6.872.
Kornacki, J. 2010. “Analysis of the influence of current on the manoeuvres of the turning of the ship on the ports turning-basins.” TransNav 4 (4): 397–402.
Kornacki, J. 2011a. “Ship’s turning in the navigational practice.” TransNav 5(2): 261–267.
Kornacki, J. 2011b. “Simulating method of ship’s turning-basins designing.” TransNav 5 (2): 241–246.
Kornacki, J., and W. Galor. 2007. “Analysis of ships turn manoeuvres in port water area.” TransNav 1 (1): 95–100.
Page, S., M. Mansuy, K. Eloot, M. Candries, and R. Adams. 2023. “Benchmark of turning basin options for the ECMT class V network of Nord-Pas-De-Calais (France).” In Vol. 264 of Proc., PIANC Smart Rivers 2022. Lecture Notes in Civil Engineering, edited by Y. Li, Y. Hu, P. Rigo, F. E. Lefler, and G. Zhao, 311–323. Singapore: Springer.
Paulauskas, V., D. Paulauskas, B. Plačienė, and V. Lukauskas. 2016. “Optimize width of navigational channels and ships turning basins in ports.” Transport 31 (1): 70–75. https://doi.org/10.3846/16484142.2015.1060632.
PIANC. 2014. Harbour approach channels design guidelines. Rep. No. 121. Brussels, Belgium: PIANC.
PIANC. 2019. Design guidelines for inland waterway dimensions. InCom WG141. Brussels, Belgium: PIANC.
PIANC. 2020. Standardisation of inland waterways proposal for the revision of the ECMT 1992 classification. InCom WG 179. Brussels, Belgium: PIANC.
Seo, S.-G. 2017. “Safer and more efficient ship handling with the pivot point concept.” TransNav 10 (4): 605–612. https://doi.org/10.12716/1001.10.04.09.
Verwilligen, J., G. Delefortrie, S. Vos, M. Vantorre, and K. Eloot. 2015. “Validation of mathematical manoeuvring models by full scale measurements.” In Proc., Int. Conf. on Marine Simulation and Ship Manoeuvrability, 1–16. Harlingen, Netherlands: International Marine Simulator Forum.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Oct 14, 2022
Accepted: Jan 19, 2023
Published online: Apr 13, 2023
Published in print: Jul 1, 2023
Discussion open until: Sep 13, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.