Abstract
In the current version of the Highway Capacity Manual (HCM-6), the equal capacity passenger car equivalency (EC-PCE) method is used to account for the effect of trucks for capacity analyses. The EC-PCEs for freeway segments were estimated using a microsimulation-based methodology where a nonlinear regression model (NLRM) with 15 model parameters was used to develop capacity adjustment factor (CAF) models using the microsimulation data as input. The objective of this paper is to introduce a simpler nonlinear regression model with 6 model parameters that can be used for the estimation of CAF values and EC-PCE values for freeway and multilane highway segments. It was found that the proposed model can readily substitute the original model with little loss in fidelity. The CAF formulae developed in this paper can be used to calculate EC-PCE values directly, obviating the need for the HCM-6 EC-PCE tables. Equally important, the simpler models provide the user with a better understanding of the trade-offs between capacity, CAF, and EC-PCE values and the parameters that affect them.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors would like to thank the Nebraska Transportation Center for providing the necessary technical tools used in this research. In addition, the authors would like to acknowledge the Fulbright foundation who supported Dr. Hurtado-Beltran’s Ph.D. work at the University of Nebraska-Lincoln. The contents of this paper reflect the views of the authors, who are responsible for the facts and the accuracy of the information presented herein and are not necessarily representative of any group or agency. The authors confirm contribution to the paper as follows: study conception and design: AH, LR; data collection: AH, LR; analysis and interpretation of results: AH, LR; and draft manuscript preparation: AH, LR. All authors reviewed the results and approved the final version of the manuscript.
References
Bourke, P. 1999. “Interpolation methods.” Miscellaneous: Projection, modelling, rendering. Accessed December 1, 1999. http://paulbourke.net/geometry/transformationprojection/.
Dowling, R., G. List, B. Yang, E. Witzke, and A. Flannery. 2014a. Incorporating truck analysis into the highway capacity manual. Washington, DC: Transportation Research Board.
Dowling, R., G. List, B. Yang, E. Witzke, and A. Flannery. 2014b. Trucks in the freeway analyses of the highway capacity manual. Raleigh, NC: Institute for Transportation Research and Education.
HCM (Highway Capacity Manual). 2016. A guide for multimodal mobility analysis. Washington, DC: Transportation Research Board.
Hurtado-Beltran, A., and L. R. Rilett. 2021a. Alternative regression model structure for the HCM-6 equal-capacity passenger car equivalency methodology. Washington, DC: Transportation Research Record.
Hurtado-Beltran, A., and L. R. Rilett. 2021b. “Impact of capacity definition on the HCM-6 passenger car equivalent values.” J. Transp. Eng. Part A. Syst. 147 (2): 04020159.
Hurtado-Beltran, A., and L. R. Rilett. 2021c. “Impact of CAV truck platooning on HCM-6 capacity and passenger car equivalent values.” J. Transp. Eng. Part A. Syst. 147 (2): 04020159. https://doi.org/10.1061/JTEPBS.0000492.
Lasdon, L. S., R. L. Fox, and M. W. Ratner. 1974. “Nonlinear optimization using the generalized reduced gradient method: Revue française d’automatique, informatique, recherche opérationnelle.” Recherche Opérationnelle 8 (3): 73–103.
List, G., N. Rouphail, and B. Yang. 2014. PCE values for single grades. Raleigh, NC: Institute for Transportation Research and Education.
Zhou, J. 2018. “Effects of moving bottlenecks on traffic operations on four-lane level freeway segments.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Univ. of Nebraska-Lincoln.
Zhou, J., L. Rilett, and E. Jones. 2019. Estimating passenger car equivalent using the HCM-6 PCE methodology on four-lane level freeway segments in western US. Washington, DC: Transportation Research Record.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 1, 2021
Accepted: Sep 17, 2021
Published online: Nov 12, 2021
Published in print: Jan 1, 2022
Discussion open until: Apr 12, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Efstathios Bouhouras, Konstantina Kikeni, Athanasios Siginos, Apostolos Vouitsis, Konstantina Voulgari, Socrates Basbas, Is It Necessary to Calculate Passenger Car Equivalent Value for Commercial Vehicles in Urban Areas?, Smart Energy for Smart Transport, 10.1007/978-3-031-23721-8_102, (1266-1277), (2023).