Evaluating the Wheelset Health Status of Rail Transit Vehicles: Synthesis of Wear Mechanism and Data-Driven Analysis
Publication: Journal of Transportation Engineering, Part A: Systems
Volume 146, Issue 12
Abstract
The security and reliability of rail transit vehicles in service are greatly affected by their wheel–rail contact. Thus, modeling the wear of wheelsets and monitoring their status is important for improving safety and reducing costs. A key issue involves evaluating the wheelset status accurately and using this as the basis for developing effective maintenance strategies and measures. However, the open nature of actual wheel–rail systems and their inconsistent environmental conditions make it difficult to construct a precise theoretical model that covers both wheelset wear and status evaluation. In this paper, a synthesis approach for evaluating the wheelset health status of rail transit vehicles is proposed. The wheelset health status is defined, and then a data-driven wheelset health evaluation model is developed. Potential causes of deviations between the model and reality are analyzed based on a theoretical wear mechanism, and application prerequisites for the proposed model are given. A case study involving the Shanghai Metro shows that the proposed approach operates well and can, therefore, be applied in practice.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code used during the study were provided by a third party (Shanghai Metro Co., Ltd.). Direct requests for these materials may be made to the provider, as indicated in the “Acknowledgments” section.
Acknowledgments
The study was financially supported by the Natural Science Foundation of China (71701152) and the Research Program of Science and Technology Commission in Shanghai (18510745800). The authors wish to acknowledge Shanghai Metro Co., Ltd., for providing raw data during the research.
References
Andrade, A. R., and J. Stow. 2016. “Statistical modelling of wear and damage trajectories of railway wheelsets.” Qual. Reliab. Eng. Int. 32 (8): 2909–2923. https://doi.org/10.1002/qre.1977.
Andrade, A. R., and P. F. Teixeira. 2011. “Biobjective optimization model for maintenance and renewal decisions related to rail track geometry.” Transp. Res. Rec. 2261 (1): 163–170. https://doi.org/10.3141/2261-19.
Bevan, A., P. Molyneux-Berry, B. Eickhoff, and M. Burstow. 2013. “Development and validation of a wheel wear and rolling contact fatigue damage model.” Wear 307 (1–2): 100–111. https://doi.org/10.1016/j.wear.2013.08.004.
Braghin, F., R. Lewis, R. S. Dwyer-Joyce, and S. Bruni. 2006. “A mathematical model to predict railway wheel profile evolution due to wear.” Wear 261 (11–12): 1253–1264. https://doi.org/10.1016/j.wear.2006.03.025.
Enblom, R. 2009. “Deterioration mechanisms in the wheel-rail interface with focus on wear prediction: A literature review.” Veh. Syst. Dyn. 47 (6): 661–700. https://doi.org/10.1080/00423110802331559.
Enblom, R., and M. Berg. 2005. “Simulation of railway wheel profile development due to wear–influence of disc braking and contact environment.” Wear 258 (7): 1055–1063. https://doi.org/10.1016/j.wear.2004.03.055.
Ghofrani, F., Q. He, R. M. P. Goverde, and X. Liu. 2018. “Recent applications of big data analytics in railway transportation systems: A survey.” Transp. Res. Part C: Emerging Technol. 90 (May): 226–246. https://doi.org/10.1016/j.trc.2018.03.010.
Godau, R., and M. McGeoch. 2016. “Use of generational models for asset management strategies in an Australian metro rail organisation.” In Proc., 10th World Congress on Engineering Asset Management (WCEAM 2015), 173–188. Cham, Switzerland: Springer.
Guo, T., Y. Qi, and F. Gan. 2018. “Simulation and analysis of wheel wear prediction with rigid flexible couple wheelset.” IOP Conf. Ser.: Earth Environ. Sci. 189 (3): 032012. https://doi.org/10.1088/1755-1315/189/3/032012.
Hodge, V. J., S. O’Keefe, M. Weeks, and A. Moulds. 2015. “Wireless sensor networks for condition monitoring in the railway industry: A survey.” IEEE Trans. Intell. Transp. Syst. 16 (3): 1088–1106. https://doi.org/10.1109/TITS.2014.2366512.
Holicky, M. 2013. Introduction to probability and statistics for engineers. Berlin: Springer-Verlag.
Ignesti, M., M. Malvezzi, L. Marini, E. Meli, and A. Rindi. 2012. “Development of a wear model for the prediction of wheel and rail profile evolution in railway systems.” Wear 284 (Apr): 1–17. https://doi.org/10.1016/j.wear.2012.01.020.
Jendel, T. 2002. “Prediction of wheel profile wear—Comparisons with field measurements.” Wear 253 (1): 89–99. https://doi.org/10.1016/S0043-1648(02)00087-X.
Jin, X. S., L. Wu, J. Y. Fang, S. Q. Zhong, and L. Ling. 2012. “An investigation into the mechanism of the polygonal wear of metro train wheels and its effect on the dynamic behaviour of a wheel/rail system.” Veh. Syst. Dyn. 50 (12): 1817–1834. https://doi.org/10.1080/00423114.2012.695022.
Kilinc, O., and J. Vagner. 2017. “Wayside diagnosis of metro wheelsets using acoustic sensor data and one-period analysis.” In Proc., 23rd Int. Conf. on Engineering Mechanics 2017, 458–461. Brno, Czechia: Brno Univ. of Technology.
Maly, H., M. Saglitz, C. Klose, D. Ullrich, and A. Kolbasseff. 2001. “Neue Onboard- und stationäre Diagnosesysteme für Schienenfahrzeuge des Hochgeschwindigkeitsverkehrs Maly, Säglitz, Klose, Ullrich, Kolbasseff” [New on-board and stationary diagnostic systems for high-speed rail vehicles]. ZEV-Z. fuer Eisenbahnwesen und Verkehrstechnik 125 (9–10): 421–428.
Markine, V. L., I. Y. Shevtsov, and C. Esveld. 2007. “An inverse shape design method for railway wheel profiles.” Struct. Multidiscip. Optim. 33 (3): 243–253. https://doi.org/10.1007/s00158-006-0049-3.
Nielsen, J. C. O., R. Lunden, A. Johansson, and T. Vernersson. 2003. “Train-track interaction and mechanisms of irregular wear on wheel and rail surfaces.” Veh. Syst. Dyn. 40 (1–3): 3–54. https://doi.org/10.1076/vesd.40.1.3.15874.
Olofsson, U., Y. Zhu, S. Abbasi, R. Lewis, and S. Lewis. 2013. “Tribology of the wheel–rail contact—Aspects of wear, particle emission and adhesion.” Veh. Syst. Dyn. 51 (7): 1091–1120. https://doi.org/10.1080/00423114.2013.800215.
Palo, M. 2014. Condition-based maintenance for effective and efficient rolling stock capacity assurance: A study on heavy haul transport in Sweden. Berlin: Springer.
Read, G. J. M., A. Naweed, and P. M. Salmon. 2019. “Complexity on the rails: A systems-based approach to understanding safety management in rail transport.” Reliab. Eng. Syst. Saf. 188 (Aug): 352–365. https://doi.org/10.1016/j.ress.2019.03.038.
SATCO (Shanghai Alstom Transport Co., Ltd.). 2006. Shanghai Yangpu line operation, repair and maintenance manual. Shanghai, China: SATCO.
Suda, Y., T. Iwasa, H. Komine, M. Tomeoka, H. Nakazawa, K. Matsumoto, T. Nakai, M. Tanimoto, and Y. Kishimoto. 2005. “Development of onboard friction control.” Wear 258 (7–8): 1109–1114. https://doi.org/10.1016/j.wear.2004.03.059.
Tamilselvan, P., and P. Wang. 2013. “Failure diagnosis using deep belief learning based health state classification.” Reliab. Eng. Syst. Saf. 115 (Jul): 124–135. https://doi.org/10.1016/j.ress.2013.02.022.
Tao, G., Z. Wen, X. Liang, D. Ren, and X. Jin. 2019. “An investigation into the mechanism of the out-of-round wheels of metro train and its mitigation measures.” Veh. Syst. Dyn. 57 (1): 1–16. https://doi.org/10.1080/00423114.2018.1445269.
Wei, L., L. Zong, S. Luo, and X. He. 2016. “Research into the problem of wear creating a polygon-shaped wheel on metro trains.” Proc. Inst. Mech. Eng., Part F: J. Rail Rapid Transit 230 (1): 43–55. https://doi.org/10.1177/0954409714523584.
Zheng, H., S. P. Lin, and W. Zhu. 2012. Optimization and application of metro vehicles’ maintenance management based on RCM and fuzzy theory. Shanghai, China: School of Mechanical Engineering, Shanghai Jiao Tong Univ.
Zhu, W., D. Yang, Z. Guo, J. Huang, and Y. Huang. 2015. “Data-driven wheel wear modeling and reprofiling strategy optimization for metro systems.” Transp. Res. Rec. 2476 (1): 67–76. https://doi.org/10.3141/2476-10.
Zhu, W., D. Yang, and J. Huang. 2017. “A hybrid optimization strategy for the maintenance of the wheels of metro vehicles: Vehicle turning, wheel re-profiling, and multi-template use.” Proc. Inst. Mech. Eng., Part F: J. Rail Rapid Transit 232 (3): 832–841. https://doi.org/10.1177/0954409717695649.
Zobory, I. 1997. “Prediction of wheel/rail profile wear.” Veh. Syst. Dyn. 28 (2–3): 221–259. https://doi.org/10.1080/00423119708969355.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Mar 7, 2020
Accepted: Jul 29, 2020
Published online: Oct 7, 2020
Published in print: Dec 1, 2020
Discussion open until: Mar 7, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.