Imperfect Condition-Based Maintenance Strategy for a Deteriorating Rail Track System with Multiple Competitive Failure Modes
Publication: Journal of Transportation Engineering, Part A: Systems
Volume 146, Issue 9
Abstract
This paper modeled rail track segments subject to multiple competitive failure modes and shock deterioration processes caused by passing trains. To determine the optimal inspection interval and intervention level of each failure mode, competitive failures were modeled by a series system, the shock arrivals were modeled by a Poisson process, and the deterioration caused by each shock was modeled by a gamma process. A maintenance improvement factor was considered as a function to model the decreasing effect of maintenance and aging on the system. The proposed model was applied to a real-world rail data set in which three geometry failure modes were the possible system deterioration mechanisms, and the condition-based maintenance strategy was determined by a Monte Carlo simulation algorithm for two classes of rail. The effects of reliability level and improvement factor on maintenance strategies were discussed numerically.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
References
Alaswad, S., and Y. Xiang. 2017. “A review on condition-based maintenance optimization models for stochastically deteriorating system.” Reliab. Eng. Syst. Saf. 157 (Jan): 54–63. https://doi.org/10.1016/j.ress.2016.08.009.
Andrade, A. R., and P. F. Teixeira. 2011. “Uncertainty in rail-track geometry degradation: Lisbon-Oporto line case study.” J. Transp. Eng. 137 (3): 193–200. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000206.
Arasteh khouy, I., P.-O. Larsson-Kråik, A. Nissen, U. Juntti, and H. Schunnesson. 2014. “Optimisation of track geometry inspection interval.” Proc. Inst. Mech. Eng. Part F J. Rail Rapid Transit 228 (5): 546–556. https://doi.org/10.1177/0954409713484711.
Arasteh khouy, I., P.-O. Larsson-Kråik, A. Nissen, and U. Kumar. 2016. “Cost-effective track geometry maintenance limits.” Proc. Inst. Mech. Eng. Part F J. Rail Rapid Transit 230 (2): 611–622. https://doi.org/10.1177/0954409714542859.
Audley, M., and J. Andrews. 2013. “The effects of tamping on railway track geometry degradation.” Proc. Inst. Mech. Eng. Part F J. Rail Rapid Transit 227 (4): 376–391. https://doi.org/10.1177/0954409713480439.
Do, P., A. Voisin, E. Levrat, and B. Iung. 2015. “A proactive condition-based maintenance strategy with both perfect and imperfect maintenance actions.” Reliab. Eng. Syst. Saf. 133 (Jan): 22–32. https://doi.org/10.1016/j.ress.2014.08.011.
FRA (Federal Railroad Administration). 2011. Part 213—Track safety standards. Washington, DC: DOT.
Hamid, A., and A. Gross. 1981. “Track-quality indices and track degradation models for maintenance-of-way planning.” Transp. Res. Board 809: 2–8.
Liu, B., M. Xie, Z. Xu, and W. Kuo. 2016. “An imperfect maintenance policy for mission-oriented systems subject to degradation and external shocks.” Comput. Ind. Eng. 102: 21–32. https://doi.org/10.1016/j.cie.2016.10.008.
Liu, B., Z. Xu, M. Xie, and W. Kuo. 2014. “A value-based preventive maintenance policy for multi-component system with continuously degrading components.” Reliab. Eng. Syst. Saf. 132 (Dec): 83–89. https://doi.org/10.1016/j.ress.2014.06.012.
Lopez-Pita, A., P. Teixeira, C. Casas, A. Bachiller, and P. Ferreira. 2008. “Maintenance costs of high-speed lines in Europe: State of the art.” Transp. Res. Rec. 2043 (1): 13–19. https://doi.org/10.3141/2043-02.
Park, C., and W. J. Padgett. 2006. “Stochastic degradation models with several accelerating variables.” IEEE Trans. Reliab. 55 (2): 379–390. https://doi.org/10.1109/TR.2006.874937.
Peng, H., Q. Feng, and D. W. Coit. 2010. “Reliability and maintenance modeling for systems subject to multiple dependent competing failure processes.” IIE Trans. 43 (1): 12–22. https://doi.org/10.1080/0740817X.2010.491502.
Pham, H., and H. Wang. 1996. “Imperfect maintenance.” Eur. J. Oper. Res. 94 (3): 425–438. https://doi.org/10.1016/S0377-2217(96)00099-9.
Sadeghi, J., and H. Askarinejad. 2009. “An investigation into the effects of track structural conditions on railway track geometry deviations.” Proc. Inst. Mech. Eng. Part F J. Rail Rapid Transit 223 (4): 415–425. https://doi.org/10.1243/09544097JRRT266.
Sadeghi, J., and H. Askarinejad. 2010. “Development of improved railway track degradation models.” Struct. Infrastruct. Eng. 6 (6): 675–688. https://doi.org/10.1080/15732470801902436.
Sadeghi, J., and H. Askarinejad. 2012. “Application of neural networks in evaluation of railway track quality condition.” J. Mech. Sci. Technol. 26 (1): 113–122. https://doi.org/10.1007/s12206-011-1016-5.
Sadeghi, J., M. E. Motieyan, and J. A. Zakeri. 2019a. “Development of integrated railway ballast quality index.” Int. J. Pavement Eng. 1–9. https://doi.org/10.1080/10298436.2019.1577418.
Sadeghi, J., M. M. Najar, J. Zakeri, and C. Kuttelwascher. 2019b. “Development of railway ballast geometry index using automated measurement system.” Measurement 138 (May): 132–142. https://doi.org/10.1016/j.measurement.2019.01.092.
Section, R. I. R. A. 2015. “Track geometry analytics.” Accessed January 20, 2018. https://connect.informs.org/railway-applications/new-item3/problem-solving-competition681/new-item9.
Soleimanmeigouni, I., A. Ahmadi, and U. Kumar. 2016. “Track geometry degradation and maintenance modelling: A review.” Proc. Inst. Mech. Eng. Part F J. Rail Rapid Transit 232 (1): 73–102. https://doi.org/10.1177/0954409716657849.
Soleimanmeigouni, I., A. Ahmadi, and U. Kumar. 2018. “Track geometry degradation and maintenance modelling: A review.” Proc. Inst. Mech. Eng. Part F J. Rail Rapid Transit 232 (1): 73–102. https://doi.org/10.1177/0954409716657849.
ten Wolde, M., and A. A. Ghobbar. 2013. “Optimizing inspection intervals—Reliability and availability in terms of a cost model: A case study on railway carriers.” Reliab. Eng. Syst. Saf. 114: 137–147. https://doi.org/10.1016/j.ress.2012.12.013.
Van, P. D., and C. Bérenguer. 2012. “Condition-based maintenance with imperfect preventive repairs for a deteriorating production system.” Qual. Reliab. Eng. Int. 28 (6): 624–633. https://doi.org/10.1002/qre.1431.
van Noortwijk, J. 2009. “A survey of the application of gamma processes in maintenance.” Reliab. Eng. Syst. Saf. 94 (1): 2–21. https://doi.org/10.1016/j.ress.2007.03.019.
Wang, Y., and H. Pham. 2011. “A multi-objective optimization of imperfect preventive maintenance policy for dependent competing risk systems with hidden failure.” IEEE Trans. Reliab. 60 (4): 770–781. https://doi.org/10.1109/TR.2011.2167779.
Wu, F., S. A. Niknam, and J. E. Kobza. 2015. “A cost effective degradation-based maintenance strategy under imperfect repair.” Reliab. Eng. Syst. Saf. 144 (Dec): 234–243. https://doi.org/10.1016/j.ress.2015.08.002.
Xiang, Y., Z. Zhu, D. W. Coit, and Q. Feng. 2017. “Condition-based maintenance under performance-based contracting.” Comput. Ind. Eng. 111 (Sep): 391–402. https://doi.org/10.1016/j.cie.2017.07.035.
Ye, Z.-S., and N. Chen. 2014. “The inverse Gaussian process as a degradation model.” Technometrics 56 (3): 302–311. https://doi.org/10.1080/00401706.2013.830074.
Yousefikia, M., S. Moridpour, S. Setunge, and E. Mazloumi. 2014. “Modeling degradation of tracks for maintenance planning on a tram line.” J. Traffic Logist. Eng. 2 (2): 86–91. https://doi.org/10.12720/jtle.2.2.86-91.
Zhang, M., O. Gaudoin, and M. Xie. 2015. “Degradation-based maintenance decision using stochastic filtering for systems under imperfect maintenance.” Eur. J. Oper. Res. 245 (2): 531–541. https://doi.org/10.1016/j.ejor.2015.02.050.
Zhu, W., M. Fouladirad, and C. Bérenguer. 2015. “Condition-based maintenance policies for a combined wear and shock deterioration model with covariates.” Comput. Ind. Eng. 85 (Jul): 268–283. https://doi.org/10.1016/j.cie.2015.04.005.
Zio, E. 2013. Vol. 39 of The Monte Carlo simulation method for system reliability and risk analysis. New York: Springer.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Oct 22, 2019
Accepted: Apr 7, 2020
Published online: Jun 22, 2020
Published in print: Sep 1, 2020
Discussion open until: Nov 22, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.