Analytical Method of Connecting Parallel Tracks Located in a Circular Arc Using Curved Turnouts
Publication: Journal of Transportation Engineering, Part A: Systems
Volume 146, Issue 3
Abstract
The paper focused on the issue of curving railroad turnouts in order to use them to connect parallel tracks located in a circular curve on a double-track line. An analytical method of recording was applied, which gave greater application opportunities in particular applications. The basic assumption adopted was to eliminate the reverse curve from the geometrical layout. This indicated the need to adopt a solution with two one-sided curved turnouts. At the same time, in the area where the ends of both turnouts were connected, the values of the occurring bends had to be minimized. After proper curving of the turnouts which were to be applied in both the external and the internal tracks, the question of determining their location becomes the basic issue. The present solution to the problem proposes an appropriate course of action leading to determining the most advantageous mutual position of both turnouts, wherein the connection of the end of the diverging tracks is obtained by means of a straight insert or a segment of a circular arc and a straight insert.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
Alfi, S., and S. Bruni. 2009. “Mathematical modelling of train-turnout interaction.” Veh. Syst. Dyn. 47 (5): 551–574. https://doi.org/10.1080/00423110802245015.
Bentley Rail Track. 2001. Rail infrastructure design and optimization. Exton, PA: Bentley Systems.
Bugarin, M. R., A. Orro, and M. Novales. 2011. “Geometry of high speed turnouts.” Transp. Res. Rec. 2261 (1): 64–72.
CEN (European Committee for Standardization). 2003. Railway applications—Track—Switches and crossings—Part 2: Requirements for geometric design. EN 13232-2. Brussels, Belgium: CEN.
Cervi, G. E. 1986. “Basic French technology for crossing, switches and special trackwork.” Transp. Res. Rec. 1071 (1): 57–63.
Deutsche Reichsbahn. 1943. Das Einrechnen von Bogenweichen und Bogenkreutzungsweichen. Berlin: Deutsche Reichsbahn.
Elsners Taschenbuch für den bautechnischen Eisenbahndienst. 1942. 14. Frankfurt am Main, Berlin: Dr. Arthur Tetzlaff-Verlag.
Elsners Taschenbuch für den bautechnischen Eisenbahndienst. 1954. 26. Frankfurt am Main, Berlin: Dr. Arthur Tetzlaff-Verlag.
FRA (Federal Railroad Administration). 2008. Code of federal regulations title 49 transportation. Washington, DC: US Government Printing Office.
Hartmann, R. 1940. Reichsbahmweichen und Reichsbahnbagenweichen. Berlin.
Honner, D. 2016. “Guide to using the curved turnout & crossover template designer by David Honner.” Accessed March 15, 2019. http://www.proto87.com/media/CTnCTD/Guide_to_CTnCT_designer.pdf.
Koc, W. 2017. “Arching of railway turnouts by analytical design method.” Curr. J. Appl. Sci. Technol. 25 (4): 1–12. https://doi.org/10.9734/CJAST/2017/39093.
Laczynski, J. 1976. Railway turnouts. [In Polish.] Warsaw, Poland: WKiL.
Lovejoy, L. G., and G. W. Martyn. 2012. “Track design handbook for light rail transit.” In Special trackwork. 2nd ed. Washington, DC: Transportation Research Board.
Nicklisch, D., E. Kassa, J. C. O. Nielsen, M. Ekh, and S. Iwnicki. 2010. “Geometry and stiffness optimization for swtches and crossings, and simulation of material degradation.” Proc. Inst. Mech. Eng. Part F: J. Rail Rapid Transit. 224 (4): 279–292. https://doi.org/10.1243/09544097JRRT348.
Niemann, W. 1953. Merkbuch für das Entwerfen und Abstecken von Gleisen und Weichen. Leipzig, Germany: Fachbuchverlag.
North, P. D., Jr., and B. C. Whiton. 2011. “‘X-W-C’–rated—Guidelines for turnouts in horizontal curves.” In Proc., 2011 Annual Conf.: AREMA 2011, 18–21. College Park, MD: American Railway Engineering and Maintenance-of-Way Association.
Palsson, B. A. 2013. “Design of optimisation of switch rails in railway turnouts.” Veh. Syst. Dyn. 51 (10): 1610–1639. https://doi.org/10.1080/00423114.2013.807933.
Patlasov, O. M., S. O. Tokariev, and Y. O. Patlasov. 2016. “Establishment of the permissible train speed on the curved turnouts.” Zaliznična kolija (Vistnik Dnipropetrovskogo Nacionalnogo Universitetu Zalizničnogo Transportu) 62 (2): 98–108. https://doi.org/10.15802/stp2016/67318.
Ping, W. 2015. “Design of high-speed railway turnouts.” In Theory and applications. Oxford, UK: Elsevier.
PKP (Polish State Railways). 2018. “Technical standards—Detailed technical conditions for the modernization or construction of railway lines for speed (for conventional rolling stock)/ (for rolling stock with a tilting box).” [In Polish.] In Attachment ST-T1- A6: Geometrical layouts of tracks. Warsaw, Poland: PKP Polskie Linie Kolejowe.
Rzepka, W. 1966. Curved turnouts in plan and profile. [In Polish.] Warsaw, Poland: WKiL.
Sadeghi, J., A. Masnabadi, and A. Mazraeh. 2016. “Correlations among railway track geometry, safety and speds.” Proc. Inst. Civ. Eng. Transp. 169 (4): 219–229. https://doi.org/10.1680/jtran.15.00059.
Schramm, G. 1958. Der gleisbogen: Seine geometrische und bauliche Gestaltung. Darmstadt: Elsner.
Wojtczak, R. 2015. “Geometry of switches used by network rail in Great Britain.” [In Polish.] Przeglad Komunikacyjny 70 (7): 8–10.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Apr 8, 2019
Accepted: Jul 29, 2019
Published online: Dec 30, 2019
Published in print: Mar 1, 2020
Discussion open until: May 30, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.