Empirical Analysis of Operating Speed Performance on Undivided Hilly Roads
Publication: Journal of Transportation Engineering, Part A: Systems
Volume 145, Issue 8
Abstract
Drivers’ speed choice on a curve depends on their perception of the safety offered by that particular geometric element. Perception is a latent variable and is difficult to measure directly from the field. This study assumed that perception is reflected in the speed and path radius adopted by drivers on curves. Preliminary analysis of the speed variability and the difference between path radius and curve radius showed that the curve direction and superimposed horizontal and vertical alignments significantly influence the driver’s perception. The study suggests a clustering-based approach to deal with drivers’ perception of a complex geometry. Curve direction and type of superimposed vertical curve were considered as the criteria for clustering. Based on those two criteria, the curves were clustered into eight groups. For each cluster, the geometric variables influencing the operating speed were identified through correlation analysis. The study found a significant improvement in the correlation between geometric parameters and operating speed after clustering. The results support the assumption that driver perception plays a significant role in operating speed decisions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abbas, S. K. S., M. A. Adnan, and I. R. Endut. 2012. “An investigation of the 85th percentile operating speed models on horizontal and vertical alignments for two-lane rural highways: A case study.” J. Inst. Eng. Malaysia 73 (1): 31–40.
Abdul-Mawjoud, A. A., and G. G. Sofia. 2008. “Development of models for predicting speed on horizontal curves for two-lane rural highways.” Arabian J. Sci. Eng. 33 (2B): 365–377.
Akoglu, H. 2018. “User’s guide to correlation coefficients.” Turk. J. Emergency Med. 18 (3): 91–93. https://doi.org/10.1016/j.tjem.2018.08.001.
Bella, F. 2005. “Verification of the coordination of horizontal alignment and profile at the driving simulator.” In Proc., 3rd Int. Symp. on Highway Geometric Design. Washington, DC: Transportation Research Board of the National Academies.
Bidulka, S., T. Sayed, and Y. Hassan. 2002. “Influence of vertical alignment on horizontal curve perception: Phase I: Examining the hypothesis.” Transp. Res. Rec. 1796 (1): 12–23. https://doi.org/10.3141/1796-02.
Camacho-Torregrosa, F. J., A. M. Pérez-Zuriaga, J. M. Campoy-Ungría, and A. García-García. 2013. “New geometric design consistency model based on operating speed profiles for road safety evaluation.” Accid. Anal. Prev. 61 (Dec): 33–42. https://doi.org/10.1016/j.aap.2012.10.001.
Castro, M., J. F. Sánchez, J. A. Sánchez, and L. Iglesias. 2011. “Operating speed and speed differential for highway design consistency.” J. Transp. Eng. 137 (11): 837–840. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000309.
Cohen, J., P. Cohen, S. G. West, and L. S. Aiken. 2003. Applied multiple regression/correlation analysis for the behavioral sciences. Mahwah, NJ: Lawrence Erlbaum Associates.
Donnell, E., Y. Ni, M. Adolini, and L. Elefteriadou. 2001. “Speed prediction models for trucks on two-lane rural highways.” Transp. Res. Rec. 1751 (1): 44–55. https://doi.org/10.3141/1751-06.
Fink, K. L., and R. A. Krammes. 1995 “Tangent length and sight distance effects on accident rates at horizontal curves on rural two-lane highways.” Transp. Res. Rec. 1500: 162–168.
Fitzpatrick, K., et al. 2000a. Alternative design consistency rating methods for two-lane rural highways. Mclean, VA: Federal Highway Administration.
Fitzpatrick, K., et al. 2000b. Speed prediction for two-lane rural highways. Mclean, VA: Federal Highway Administration.
Gibreel, G. M., S. M. Easa, and I. A. El-Dimeery. 2001. “Prediction of operating speed on three-dimensional highway alignments.” J. Transp. Eng. 127 (1): 21–30. https://doi.org/10.1061/(ASCE)0733-947X(2001)127:1(21).
Gibreel, G. M., S. M. Easa, Y. Hassan, and I. A. El-Dimeery. 1999. “State of the art of highway geometric design consistency.” J. Transp. Eng. 125 (4): 305–313. https://doi.org/10.1061/(ASCE)0733-947X(1999)125:4(305).
Hasan, M., T. Sayed, and Y. Hassan. 2005. “Influence of vertical alignment on horizontal curve perception: Effect of spirals and position of vertical curve.” Can. J. Civ. Eng. 32 (1): 204–212. https://doi.org/10.1139/l04-090.
Hassan, Y., and S. M. Easa. 2003. “Effect of vertical alignment on driver perception of horizontal curves.” J. Transp. Eng. 129 (4): 399–407. https://doi.org/10.1061/(ASCE)0733-947X(2003)129:4(399).
Hassan, Y., S. M. Easa, and A. O. A. Halim. 1997. “Design considerations for combined highway alignments.” J. Transp. Eng. 123 (1): 60–68. https://doi.org/10.1061/(ASCE)0733-947X(1997)123:1(60).
Hassan, Y., T. Sayed, and S. Bidulka. 2002. “Influence of vertical alignment on horizontal curve perception: Phase II: Modeling perceived radius.” Transp. Res. Rec. 1796 (1): 24–34. https://doi.org/10.3141/1796-03.
Hou, Y., C. Sun, and P. Edara. 2012. “Statistical test for 85th and 15th percentile speeds with asymptotic distribution of sample quantiles.” Transp. Res. Rec. 2279 (1): 47–53. https://doi.org/10.3141/2279-06.
IRC (Indian Road Congress). 1983. Dimensions and weights of road design vehicle. IRC:3. New Delhi, India: IRC.
Islam, M. N., and P. N. Seneviratne. 1994. “Evaluation of design consistency of two-lane rural highways.” Inst. Transp. Eng. J. 64 (2): 28–31.
Jacob, A., and M. V. L. R. Anjaneyulu. 2013. “Operating speed of different classes of vehicles at horizontal curves on two-lane rural highways.” J. Transp. Eng. 139 (3): 287–294. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000503.
Jacob, A., and M. V. L. R. Anjaneyulu. 2015. “Geometric design consistency and safety evaluation of combined curves on two-lane rural highways.” In Proc., 3rd Conf. of Transportation Researchers Group of India (CTRG-2015). Bangalore, India: Transport Research Group of India.
Jessen, D., K. Schurr, P. McCoy, G. Pesti, and R. Huff. 2001. “Operating speed prediction on crest vertical curves of rural two-lane highways in Nebraska.” Transp. Res. Rec. 1751 (1): 67–75. https://doi.org/10.3141/1751-08.
Kowler, E. 2011. “Eye movements: The past 25 years.” Vision Res. 51 (13): 1457–1483. https://doi.org/10.1016/j.visres.2010.12.014.
Krammes, R. A., et al. 1995. Horizontal alignment design consistency for rural two-lane highways.. Mclean, VA: Federal Highway Administration.
Lamm, R., B. Psarianos, and T. Mailaender. 1999. Highway design and traffic safety engineering handbook. New York: McGraw-Hill.
Liu, J., X. Wang, and X. Yang. 2017. “Safety evaluation of combined alignments of freeway: A driving simulator study.” In Proc., 14th World Conf. on Transport Research (WCTR). Amsterdam, Netherlands: Elsevier.
Llopis-Castelló, D., B. González-Hernández, A. M. Pérez-Zuriaga, and A. García. 2018. “Speed prediction models for trucks on horizontal curves of two-lane rural roads.” Transp. Res. Rec. 2672 (17): 72–82. https://doi.org/10.1177/0361198118776111.
Mavromatis, S., B. Psarianos, P. Tsekos, G. Kleioutis, and E. Katsanos. 2016. “Investigation of vehicle motion on sharp horizontal curves combined with steep longitudinal grades.” Transp. Lett. 8 (4): 220–228. https://doi.org/10.1080/19427867.2015.1114748.
Misaghi, P., and Y. Hassan. 2005. “Modeling operating speed and speed differential on two-lane rural roads.” J. Transp. Eng. 131 (6): 408–418. https://doi.org/10.1061/(ASCE)0733-947X(2005)131:6(408).
Morris, C. M., and E. T. Donnell. 2014. “Passenger car and truck operating speed models on multilane highways with combinations of horizontal curves and steep grades.” J. Transp. Eng. 140 (11): 04014058. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000715.
Poe, C., and J. Mason Jr. 2000. “Analyzing influence of geometric design on operating speeds along low-speed urban streets: Mixed-model approach.” Transp. Res. Rec. 1737 (1): 18–25. https://doi.org/10.3141/1737-03.
Schurr, K., B. Spargo, R. Huff, and G. Pesti. 2005. “Predicted 95th percentile speeds on curved alignments approaching a stop.” Transp. Res. Rec. 1912 (1): 1–10. https://doi.org/10.1177/0361198105191200101.
Shankar, A. R., M. Anjaneyulu, and N. Sowmya. 2013. “Consistency evaluation of horizontal curves on rural highways.” J. Indian Roads Congress 73 (4): 91–99.
Smith, B. L., and R. Lamm. 1994. “Coordination of horizontal and vertical alignment with regard to highway esthetics.” Transp. Res. Rec. 1445: 73–85.
Wang, X., R. Yu, and X. Wang. 2014. “A speed study of mountainous freeway combined alignment.” In Proc., 14th COTA Int. Conf. of Transportation Professionals, 2257–2265. Reston, VA: ASCE.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Mar 28, 2018
Accepted: Jan 11, 2019
Published online: May 31, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 31, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.