Abstract
This paper presents an improved model for pedestrian crossing time that is used to establish preliminary guidelines for lateral clearance needs on railroad-highway grade crossings. The improved model includes new elements that are lacking in existing models such as pedestrian observation-reaction time, length of pedestrian unit, and safety margin. A general model for the required lateral clearance, that is applicable to any number of tracks on crossings located on horizontal curves or on tangent sections, was developed. The model can be used to determine the required lateral clearance to the right and to the left of the crossing, including maximum lateral clearance, its location, and lateral clearance at a specified location. A comparison of pedestrian crossing sight distance with intersection (vehicle) sight distance shows that lateral clearance needs for pedestrians are not generally satisfied by those currently available for vehicles. The presented design guidelines promote pedestrian safety and should be of interest to highway and railroad professionals.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank four anonymous reviewers for their thorough and most helpful comments. This research is financially supported by a Discovery Grant from the Natural Sciences and Engineering Research Council of Canada (NSERC).
References
AASHTO. (2011). “A policy on geometric design of highways and streets.” Washington, DC.
ATSB (Australian Transport Safety Bureau). (2016). “Australian rail safety occurrence data.” ⟨http://www.atsb.gov.au/publications/2012/rr-2012-010/⟩ (Feb. 23, 2016).
Coffin, A., and Morrall, J. (1995). “Walking speeds of elderly pedestrians at crosswalks.” Transp. Res. Rec., 1487, 63–67.
Easa, S. M. (2016). “Pedestrian crossing sight distance: Lateral clearance guidelines for roadways.” Transp. Res. Rec., 2588, 32–42.
Easa, S. M., and Cheng, J. (2013). “Reliability analysis of minimum green intervals for traffic signals.” J. Transp. Eng., 651–659.
Evans, A. W. (2011). “Fatal accidents at railway level crossings in Great Britain 1946–2009.” Acc. Anal. Prev., 43(5), 1837–1845.
FHWA (Federal Highway Administration). (1986). “Railroad-highway grade crossing handbook.”, U.S. Dept. of Transportation, Washington, DC.
FHWA (Federal Highway Administration). (2009a). “FHWA course on pedestrian and bicycle facilities.” U.S. Dept. of Transportation, Washington, DC.
FHWA (Federal Highway Administration). (2009b). “Manual on uniform traffic control devices for streets and highways.” U.S. Dept. of Transportation, Washington, DC.
FRA (Federal Railway Administration). (2016). “Highway-rail accidents statistical data.” ⟨https://safetydata.fra.dot.gov/OfficeofSafety/publicsite/query/HwyRailAccidentSummaryByRR.aspx⟩ (Feb. 23, 2016).
Irwin, D. (2004). “Safety criteria for light rail pedestrian crossings.” ⟨http://onlinepubs.trb.org/onlinepubs/circulars/ec058/08_02_Irwin.pdf⟩ (Feb. 25, 2004).
Knoblauch, R. L., Pietrucha, M. T., and Nitzburg, M. (1996). “Field studies of pedestrian walking speed and start-up time.” Transp. Res. Rec., 1538, 27–38.
LaPlante, J., and Kaeser, T. P. (2007). “A history of pedestrian signal walking speed assumptions.” Proc., 3rd Urban Street Symp., Transportation Research Board, Washington, DC.
Lerer, L. B., and Matzopoulos, R. (1996). “Meeting the challenge of railway injury in a South African city.” The Lancet, 348(9028), 664–666.
Lobb, B., Harre, N., and Suddendorf, N. (2003). “An evaluation of four types of railway pedestrian crossing safety intervention.” Acc. Anal. Prev., 35(4), 487–494.
Lobb, B., Harre, N., and Terry, T. (2001). “An evaluation of a suburban railway pedestrian crossing safety programme.” Acc. Anal. Prev., 33(2), 157–165.
Matzopoulos, R., and Lerer, L. B. (1998). “Hours to hell and back: A social epidemiology of railway injury in a South African city.” Soc. Sci. Med., 47(1), 75–83.
McPherson, C., and Daff, M. (2005). “Pedestrian behaviour and the design of accessible rail crossings.” Proc., 28th Australasian Transport Research Forum, Australian Dept. of Infrastructure and Regional Development, Canberra, Australia.
NZTA (New Zealand Transport Agency). (2009). “Pedestrian planning and design guide.” Wellington, New Zealand.
Schoon, J. G. (2013). “Sight distance for disabled pedestrians at crossings: Methodology comparison with other modes.” Transp. Res. Rec., 2393, 174–182.
Scottish Government. (2008). “Edinburgh international surface link. Appendix C: Calculation of rail line speed as a function of track curvature.” ⟨http://www.eisl.org.uk/AppC.html⟩ (Mar. 1, 2016).
Smith, G. (1995). “Incidents involving trains.” Aust. J. Emergency Care, 2(2), 30–34.
Transport Canada. (2007). “Pedestrian safety at grade crossing guide.” Ottawa.
Transport Canada. (2014). “Grade crossings standards.” Ottawa.
TRB (Transportation Research Board). (2010). Highway capacity manual, Washington, DC.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: May 11, 2016
Accepted: Nov 22, 2016
Published online: Mar 10, 2017
Published in print: Jul 1, 2017
Discussion open until: Aug 10, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.