Safety Evaluation and Adjustment of Superelevation Design Guides for Horizontal Curves Based on Reliability Analysis
Publication: Journal of Transportation Engineering, Part A: Systems
Volume 143, Issue 6
Abstract
In general, the use of superelevation and changes in a road’s transverse slope are typically based on the road’s design speed to provide safety and comfort for a vehicle driving on a horizontal curve. However, due to the difference between operating and design speeds, there has always been uncertainty in determining the margin of safety using superelevation. This paper discusses the assessment of the safety margins obtained from the application of superelevation in horizontal-curve design. The assessment uses geometric design guides and a reliability index to determine any uncertainties in the design parameters. In addition, adjusted design charts of superelevation values related to the radius of horizontal curves at various levels of probability of noncompliance are provided. The results show that the adjusted superelevation values are generally greater than those derived from current standards. The adjusted design charts can help designers select an appropriate superelevation value for a particular horizontal curve for highways that have geometric constraints. These adjusted charts may also aid designers in predicting the consequences and safety margins associated with the selection of superelevation alternatives required to approve geometric designs that involve violations of the standard requirements due to environmental constraints.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2011). A policy on geometric design of highways and streets, 6th Ed., Washington, DC.
Easa, S. M. (2000). “Reliability approach to intersection sight distance design.” Transp. Res. Rec., 1701, 42–52.
Echaveguren, T., Bustos, M., and de Solminihac, H. (2005). “Assessment of horizontal curves of an existing road using reliability concepts.” Can. J. Civ. Eng., 32(6), 1030–1038.
Emmanuel, L. F., (1996). “Reliability-based design for highway horizontal curves.” M.S. thesis, Dept. of Civil Engineering, Univ. of British Columbia, Vancouver, BC, Canada.
Gillespie, T. D. (1992). Fundamentals of vehicle dynamics, 1st Ed., SAE, Warrendale, PA.
Hussain, A., and Easa, S. M. (2015). “Reliability analysis of left-turn sight distance at signalized intersections.” J. Transp. Eng., .
Hussein, M., Sayed, T., Ismail, K., and Van Espen, A. (2014). “Calibrating road design guides using risk-based reliability analysis.” J. Transp. Eng., .
Ismail, K., and Sayed, T. (2009). “Risk-based framework for accommodating uncertainty in highway geometric design.” Can. J. Civ. Eng., 36(5), 743–753.
Khoury, J., and Hobeika, A. (2007). “Incorporating uncertainty into the estimation of the passing sight distance requirements.” Comput.-Aided Civ. Infrastruct. Eng., 22(5), 347–357.
Lamm, R., Choueiri, E., and Mailaender, T. (1990). “Comparison of operating speed on the dry and wet pavement of two-lane highways.” Transp. Res. Rec., 1280, 199–207.
Low, B. K., and Tang, W. H. (2007). “Efficient spreadsheet algorithm for first-order reliability method.” J. Eng. Mech., 1378–1387.
McLean, J. (1983). “Speed on curves: Side friction factor considerations.”, Australian Road Research Board, VIC, Australia.
Navin, F. P. D. (1990). “Safety factors for road design: Can they be estimated.” Transp. Res. Rec., 1280, 181–189.
Osama, A., Sayed, T., and Easa, S. M. (2016). “Framework for evaluating risk of limited sight distance for permitted left-turn movements: Case study.” Can. J. Civ. Eng., 43(4), 369–377.
Ranagnatan, R. (1999). Structural reliability analysis and design, 1st Ed., Jaico Publishing, Mumbai, India.
Richl, L., and Sayed, T. (2005). “Effect of speed prediction models and perceived radius on design consistency.” Can. J. Civ. Eng., 32(2), 388–399.
Richl, L., and Sayed, T. (2006). “Evaluating the safety risk of narrow medians using reliability analysis.” J. Transp. Eng., 366–375.
Sarhan, M., and Hassan, Y. (2008). “Three-dimensional, probabilistic highway design: Sight distance application.” Transp. Res. Rec., 2060, 10–18.
TAC (Transportation Association of Canada). (2007). “Geometric design guide for Canadian roads.” Ottawa.
TRB (Transportation Research Board). (2003). “Design speed, operating speed, and posted speed practices.”, AASHTO in Cooperation with the Federal Highway Administration, Washington, DC.
TRB (Transportation Research Board). (2014). “Superelevation criteria for sharp horizontal curves on steep grades.”, AASHTO in Cooperation with the Federal Highway Administration, Washington, DC.
Zheng, Z. (1997). Application of reliability theory to roadway geometric design, Univ. of British Columbia, Vancouver, BC, Canada.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: May 19, 2016
Accepted: Oct 31, 2016
Published online: Feb 16, 2017
Published in print: Jun 1, 2017
Discussion open until: Jul 16, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.