Structural Performance of Cold-Formed Steel Unstiffened and Edge-Stiffened Channel Section Beams
Publication: Journal of Structural Engineering
Volume 150, Issue 11
Abstract
An experimental program and numerical study on the structural performance of cold-formed steel unstiffened and edge-stiffened channel section members under major axis bending are presented in this paper. Channel sections with plain flanges and single-fold lips as well as double-fold inward and outward return lips were investigated. In total, 16 four-point bending tests were conducted on channel section specimens of steel grades G450, G500, and G550. The experimental results, including moment–curvature responses, failure modes, and bending capacities, were obtained and used for the calibration of a nonlinear finite-element model. Subsequently, based upon the validated finite-element model, a parametric study was carried out to examine the flexural behavior of thin-walled channel section beams. Underpinned by the results of 16 experiments and 222 numerical analyses obtained from this study together with 19 test data reported in the literature, it was revealed that the strength predictions determined by the direct strength method (DSM) in AISI S100 were overall conservative for the plain channel section beams, while generally unconservative for the edge-stiffened channel section beams. Additionally, the DSM-based approaches with consideration of local–distortional interaction were found to underestimate the nominal flexural strengths of the thin-walled channel section members with edge stiffeners. Hence, modified DSM formulas were recommended in this study to accurately predict bending capacities of the cold-formed steel unstiffened and edge-stiffened channel section beams under major axis bending.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors are thankful to BHP Steel Lysaght Singapore for the supply of test specimens and also acknowledge Mr. Man-Wai Cheng for providing assistance in the experimental program.
References
ABAQUS. 2020. ABAQUS/Standard user’s manual and ABAQUS CAE manual. Version 2020. Pawtucket, RI: Hibbitt, Karlsson & Sorensen, Inc.
AISI. 2022. North American specification for the design of cold-formed steel structural members. AISI S100-16 (R2020) w/S3-22. Washington, DC: AISI.
Anbarasu, M. 2016. “Local–distortional buckling interaction on cold-formed steel lipped channel beams.” Thin-Walled Struct. 98 (Part B): 351–359. https://doi.org/10.1016/j.tws.2015.10.003.
Bamach, M. R., J. T. Merrick, and G. J. Hancock. 1998. “Distortional buckling formulae for thin walled channel and Z-sections with return lips.” In Proc., 14th Int. Specialty Conf. on Cold-formed Steel Structures. St. Louis, MI: Univ. of Missouri-Rolla.
Camotim, D., P. B. Dinis, A. D. Martins, and B. Young. 2018. “Interactive behaviour, failure and DSM design of cold-formed steel members prone to distortional buckling.” Thin-Walled Struct. 128 (Jul): 12–42. https://doi.org/10.1016/j.tws.2017.07.011.
Chen, J., M.-T. Chen, and B. Young. 2019. “Compression tests of cold-formed steel C-and Z-sections with different stiffeners.” J. Struct. Eng. 145 (5): 04019022. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002305.
Chen, M.-T., B. Young, A. D. Martins, D. Camotim, and P. B. Dinis. 2020. “Uniformly bent CFS lipped channel beams experiencing local–distortional interaction: Experimental investigation.” J. Constr. Steel Res. 170 (Jul): 106098. https://doi.org/10.1016/j.jcsr.2020.106098.
Desmond, T. P., G. Winter, and T. Pekoz. 1981. “Edge stiffeners for thin-walled members.” J. Struct. Div. 107 (2): 329–353. https://doi.org/10.1061/JSDEAG.0005645.
Dinis, P. B., and D. Camotim. 2010. “Local/distortional mode interaction in cold-formed steel lipped channel beams.” Thin-Walled Struct. 48 (10–11): 771–785. https://doi.org/10.1016/j.tws.2010.01.005.
Dinis, P. B., D. Camotim, and N. Silvestre. 2007. “FEM-based analysis of the local-plate/distortional mode interaction in cold-formed steel lipped channel columns.” Comput. Struct. 85 (19–20): 1461–1474. https://doi.org/10.1016/j.compstruc.2007.02.013.
Haidarali, M. R., and D. A. Nethercot. 2012. “Local and distortional buckling of cold-formed steel beams with edge-stiffened flanges.” J. Constr. Steel Res. 73 (Jun): 31–42. https://doi.org/10.1016/j.jcsr.2012.01.006.
Huang, Y., and B. Young. 2014. “The art of coupon tests.” J. Constr. Steel Res. 96 (May): 159–175. https://doi.org/10.1016/j.jcsr.2014.01.010.
Li, Q.-Y., and B. Young. 2022a. “Design of cold-formed steel built-up open section members under combined compression and bending.” Thin-Walled Struct. 172 (Mar): 108890. https://doi.org/10.1016/j.tws.2022.108890.
Li, Q.-Y., and B. Young. 2022b. “Structural behaviour of cold-formed steel built-up closed section beam-columns.” Thin-Walled Struct. 181 (Dec): 110087. https://doi.org/10.1016/j.tws.2022.110087.
Li, Q.-Y., and B. Young. 2023. “Experimental and numerical studies on cold-formed steel battened columns.” Eng. Struct. 288 (Aug): 116110. https://doi.org/10.1016/j.engstruct.2023.116110.
Li, Q.-Y., and B. Young. 2024. “Experimental and numerical investigation on cold-formed steel zed section beams with complex edge stiffeners.” Thin-Walled Struct. 194 (Part B): 111315. https://doi.org/10.1016/j.tws.2023.111315.
Maduliat, S., M. R. Bambach, and X. L. Zhao. 2012a. “Inelastic behaviour and design of cold-formed channel sections in bending.” Thin-Walled Struct. 51 (Feb): 158–166. https://doi.org/10.1016/j.tws.2011.10.011.
Maduliat, S., M. R. Bambach, and X. L. Zhao. 2012b. “Yield line mechanism analysis of cold-formed channel sections with edge stiffeners under bending.” Struct. Eng. Mech. 42 (6): 883–897. https://doi.org/10.12989/sem.2012.42.6.883.
Manikandan, P., S. Balaji, S. Sukumar, and M. Sivakumar. 2017. “Experimental and numerical analysis of web stiffened cold-formed steel channel column with various types of edge stiffener.” Int. J. Adv. Struct. Eng. 9 (2): 129–138. https://doi.org/10.1007/s40091-017-0153-1.
Martins, A. D., D. Camotim, and P. B. Dinis. 2017. “Local–distortional interaction in cold-formed steel beams: Behaviour, strength and DSM design.” Thin-Walled Struct. 119 (Oct): 879–901. https://doi.org/10.1016/j.tws.2017.06.011.
Martins, A. D., D. Camotim, R. Gonçalves, and P. B. Dinis. 2018. “On the mechanics of local–distortional interaction in thin-walled lipped channel beams.” Thin-Walled Struct. 128 (Jul): 108–125. https://doi.org/10.1016/j.tws.2017.05.035.
Meimand, V., and B. Schafer. 2014. “Impact of load combinations on structural reliability determined from testing cold-formed steel components.” Struct. Saf. 48 (May): 25–32. https://doi.org/10.1016/j.strusafe.2013.10.006.
Rogers, C. A., and R. Schuster. 1995. Interaction buckling of flange, edge stiffener and web of c-sections in bending. Waterloo, ON, Canada: Univ. of Waterloo.
Schafer, B. W., and S. Ádány. 2006. “Buckling analysis of cold-formed steel members using CUFSM: Conventional and constrained finite strip methods.” In Proc., 18th Int. Specialty Conf. on Cold-Formed Steel Structures. Orlando, FL: Univ. of Missouri-Rolla.
Schafer, B. W., Z. Li, and C. D. Moen. 2010. “Computational modeling of cold-formed steel.” Thin-Walled Struct. 48 (10–11): 752–762. https://doi.org/10.1016/j.tws.2010.04.008.
Schafer, B. W., and T. Peköz. 1998. “Computational modeling of cold-formed steel: Characterizing geometric imperfections and residual stresses.” J. Constr. Steel Res. 47 (3): 193–210. https://doi.org/10.1016/S0143-974X(98)00007-8.
Schafer, B. W., A. Sarawit, and T. Peköz. 2006. “Complex edge stiffeners for thin-walled members.” J. Struct. Eng. 132 (2): 212–226. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(212).
Silvestre, N., and D. Camotim. 2004. “Distortional buckling formulae for cold-formed steel rack-section members.” Steel Compos. Struct. 4 (1): 49–75. https://doi.org/10.12989/scs.2004.4.1.049.
Silvestre, N., D. Camotim, and P. B. Dinis. 2007. “DSM design of fixed lipped channel columns against local-plate/distortional interactive buckling.” In Proc., 6th Int. Conf. on Steel and Aluminium Structures (ICSAS’07), 752–759. Oxford, UK: Oxford Brookes Univ.
Silvestre, N., D. Camotim, and P. B. Dinis. 2009. “Direct strength prediction of lipped channel columns experiencing local-plate/distortional interaction.” Adv. Steel Constr. 5 (1): 45–67. https://doi.org//10.18057/IJASC.2009.5.1.4.
Silvestre, N., P. B. Dinis, and D. Camotim. 2006. “Direct strength method for lipped channel columns and beams affected by local-plate/distortional interaction.” In Proc., 18th Int. Specialty Conf. on Cold-Formed Steel Structures. Orlando, FL: Univ. of Missouri-Rolla.
Teng, J. G., J. Yao, and Y. Zhao. 2003. “Distortional buckling of channel beam-columns.” Thin-Walled Struct. 41 (7): 595–617. https://doi.org/10.1016/S0263-8231(03)00007-7.
Vy, S. T., and M. Mahendran. 2021. “Behaviour and design of slender built-up nested cold-formed steel compression members.” Eng. Struct. 241 (Aug): 112446. https://doi.org/10.1016/j.engstruct.2021.112446.
Wang, C., Z. Zhang, L. Jia, and X. Yu. 2017. “Bending tests and finite element analysis of lipped channels with complex edge stiffeners and web stiffeners.” J. Central South Univ. 24 (9): 2145–2153. https://doi.org/10.1007/s11771-017-3623-5.
Wang, C., Z. Zhang, D. Zhao, and Q. Liu. 2016. “Compression tests and numerical analysis of web-stiffened channels with complex edge stiffeners.” J. Constr. Steel Res. 116 (Jan): 29–39. https://doi.org/10.1016/j.jcsr.2015.08.013.
Wang, H., and Y. Zhang. 2009. “Experimental and numerical investigation on cold-formed steel C-section flexural members.” J. Constr. Steel Res. 65 (5): 1225–1235. https://doi.org/10.1016/j.jcsr.2008.08.007.
Wang, L., and B. Young. 2014. “Design of cold-formed steel channels with stiffened webs subjected to bending.” Thin-Walled Struct. 85 (Dec): 81–92. https://doi.org/10.1016/j.tws.2014.08.002.
Xiang, Y., X. Zhou, Y. Shi, L. Xu, and Y. Xu. 2020. “Experimental investigation and finite element analysis of cold-formed steel channel columns with complex edge stiffeners.” Thin-Walled Struct. 152 (Jul): 106769. https://doi.org/10.1016/j.tws.2020.106769.
Yan, J., and B. Young. 2002. “Column tests of cold-formed steel channels with complex stiffeners.” J. Struct. Eng. 128 (6): 737–745. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:6(737).
Ye, J., I. Hajirasouliha, J. Becque, and K. Pilakoutas. 2016. “Development of more efficient cold-formed steel channel sections in bending.” Thin-Walled Struct. 101 (Apr): 1–13. https://doi.org/10.1016/j.tws.2015.12.021.
Young, B., and E. Ellobody. 2005. “Buckling analysis of cold-formed steel lipped angle columns.” J. Struct. Eng. 131 (10): 1570–1579. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:10(1570).
Young, B., E. Ellobody, and J. He. 2023. “Web crippling tests on cold-formed high strength steel channel sections having different stiffened flanges and stiffened web.” Thin-Walled Struct. 190 (Sep): 110995. https://doi.org/10.1016/j.tws.2023.110995.
Young, B., and G. J. Hancock. 2002. “Tests of channels subjected to combined bending and web crippling.” J. Struct. Eng. 128 (3): 300–308. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:3(300).
Young, B., and J. Yan. 2004. “Numerical investigation of channel columns with complex stiffeners—Part II: Parametric study and design.” Thin-Walled Struct. 42 (6): 895–909. https://doi.org/10.1016/j.tws.2004.01.004.
Zhang, L., S. Li, K. H. Tan, and O. Zhao. 2021. “Experimental and numerical investigations of press-braked stainless steel channel section beam-columns.” Thin-Walled Struct. 161 (Apr): 107344. https://doi.org/10.1016/j.tws.2020.107344.
Zhang, L., and O. Zhao. 2022. “Experimental and numerical study of press-braked S690 high strength steel slender channel section columns prone to local–flexural interactive buckling.” Eng. Struct. 264 (Aug): 114468. https://doi.org/10.1016/j.engstruct.2022.114468.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 150 • Issue 11 • November 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Oct 15, 2023
Accepted: Feb 20, 2024
Published online: Aug 22, 2024
Published in print: Nov 1, 2024
Discussion open until: Jan 22, 2025
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.