Nonlinear Models of Multistory Timber Frames with Timber Buckling-Restrained Braces
Publication: Journal of Structural Engineering
Volume 150, Issue 9
Abstract
The building industry requires the development of a ductile lateral force resisting system made of mass timber to help mass timber to continue to grow in popularity as the primary structural building material. The OpenSees framework was used to develop a numerical model of a single-story timber frame with a timber buckling-restrained brace, which was validated by the results of a previously completed series of quasistatic cyclic timber buckling-restrained brace (TBRB) component and subassembly tests. The experimental validation included a model developed for the hysteretic behavior of the TBRB and the rotational capacity of beam–column joints made with mass ply lam (MPL) panels, two slotted-in steel plates, and a number of steel dowels. The single-story model TBRB braced frame was then expanded to a numerical model of an eight-story mass timber buckling-restrained braced frame. The TBRB frame was analyzed with static pushover, quasistatic cyclic loads, and earthquake simulations. During the simulation of eleven design-level earthquake ground motions, the building experienced a peak interstory drift at of 2.54% at the first-floor level and a peak floor acceleration of 1.7g at the roof. The numerical model developed in this research of a timber buckling-restrained braced frame with TBRBs is novel and could be used to design timber buckling-restrained braced frames as a ductile lateral force resisting solution for mass timber buildings in seismic regions.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors would like to acknowledge the financial support provided by Wood Innovations, under USDA Grant No. 20-DG-11046000-615.
References
APA (American Plywood Association). 2022. Freres mass ply panels (MPP), and mass ply lam (MPL) beams and columns.. Tacoma, WA: APA.
ASCE. 2016. Minimum design loads and associated criteria for buildings and other structures. ASCE 7-16. Reston, VA: ASCE.
AWC (American Wood Council). 2018. General dowel equations for calculating lateral connection values with Appendix A. Technical Rep. No. 12. Leesburg, VA: AWC.
Blomgren, H.-E., J.-P. Koppitz, A. D. Valdes, and E. Ko. 2016. “The heavy timber buckling-restrained brace frame as a solution for commercial buildings in regions of high seismicity.” In Proc., World Conf. on Timber Engineering. Vienna, Austria: Institute for Mechanics of Materials and Structures.
Blomgren, H.-E., S. Pei, Z. Jin, J. Powers, J. D. Dolan, J. W. van de Lindt, A. R. Barbosa, and D. Huang. 2019. “Full-scale shake table testing of cross-laminated timber rocking shear walls with replaceable components.” J. Struct. Eng. 145 (10): 04019115. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002388.
Dong, W., M. Li, C.-L. Lee, and G. MacRae. 2021. “Numerical modelling of glulam frames with buckling restrained braces.” Eng. Struct. 239 (July): 112338. https://doi.org/10.1016/j.engstruct.2021.112338.
Dong, W., M. Li, T. Sullivan, G. MacRae, C.-L. Lee, and T. Chang. 2022. “Direct displacement-based seismic design of glulam frames with buckling restrained braces.” J. Earthquake Eng. 27 (8): 2166–2197. https://doi.org/10.1080/13632469.2022.2110999.
FEMA. 2022. Hazus earthquake model technical manual. Washington, DC: FEMA.
Ganey, R., J. Berman, T. Akbas, S. Loftus, J. D. Dolan, R. Sause, J. Ricles, S. Pei, J. van de Lindt, and H.-E. Blomgren. 2017. “Experimental investigation of self-centering cross-laminated timber walls.” J. Struct. Eng. 143 (10): 04017135. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001877.
Gilbert, C. F., and J. Erochko. 2019. “Development and testing of hybrid timber-steel braced frames.” Eng. Struct. 198 (Nov): 109495. https://doi.org/10.1016/j.engstruct.2019.109495.
Gohlich, R., J. Erochko, and J. E. Woods. 2018. “Experimental testing and numerical moment-resisting frame with ductile steel links.” Earthquake Eng. Struct. Dyn. 47 (6): 1460–1477. https://doi.org/10.1002/eqe.3025.
Hashemi, A., S. M. M. Yousef-Beik, P. Zarnani, and P. Quenneville. 2021. “Seismic strengthening of conventional timber structures using resilient braces.” Structures 32 (Aug): 1619–1633. https://doi.org/10.1016/j.istruc.2021.03.100.
McKenna, F., M. H. Scott, and G. L. Fenves. 2009. “Nonlinear finite-element analysis software architecture using object composition.” J. Comput. Civ. Eng. 24 (1): 95–107. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000002.
Murphy, C., C. P. Pantelides, H. Blomgren, and D. Rammer. 2021. “Development of timber buckling restrained brace for mass timber-braced frames.” J. Struct. Eng. 147 (5): 04021050. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002996.
PEER (Pacific Earthquake Engineering Research Center). 2020. “NGA-West 2 database flat file.” Accessed February 23, 2023. https://ngawest2.berkeley.ed/databases/.
Pei, S., J. W. van de Lindt, A. R. Barbosa, J. W. Berman, E. McDonnell, J. D. Dolan, H.-E. Blomgren, R. B. Zimmerman, D. Huang, and S. Wichman. 2019. “Experimental seismic response of a resilient 2-story mass-timber building with post-tensioned rocking walls.” J. Struct. Eng. 145 (11): 04019120. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002382.
Seismosoft. 2022. “Seismomatch–A computer program for spectrum matching of earthquake records.” Accessed February 23, 2023. https://www.seismosoft.com/seismomatch.
Takeuchi, T., Y. Terazawa, S. Komuro, T. Kurata, and B. Sitler. 2022. “Performance and failure modes of mass timber buckling-restrained braces under cyclic loading.” Eng. Struct. 266 (Sep): 114462. https://doi.org/10.1016/j.engstruct.2022.114462.
Upadhyay, A., C. P. Pantelides, and I. Ibarra. 2019. “Residual drift mitigation for bridges retrofitted with buckling restrained braces or self-centering energy dissipation devices.” Eng. Struct. 199 (Sep): 109663. https://doi.org/10.1016/j.engstruct.2019.109663.
van de Lindt, J., M. O. Amini, D. Rammer, P. Line, S. Pei, and M. Popovski. 2020. “Seismic performance for cross-laminated timber shear wall systems in the United States.” J. Struct. Eng. 146 (9): 04020172. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002718.
van de Lindt, J., M. O. Amini, D. Rammer, P. Line, S. Pei, and M. Popovski. 2022. Determination of seismic performance factors for cross-laminated timber shear walls based on FEMA P695 methodology.. Washington, DC: DOT.
van de Lindt, J., S. Pei, S. E. Pryor, H. Shimizu, and H. Isoda. 2010. “Experimental seismic response of a full-scale six-story light-frame wood building.” J. Struct. Eng. 136 (10): 1262–1272. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000222.
Williamson, E., C. P. Pantelides, H.-E. Blomgren, and D. Rammer. 2023a. “Design and cyclic experiments of a mass timber frame with a timber buckling restrained brace.” J. Struct. Eng. 149 (10): 04023131. https://doi.org/10.1061/JSENDH.STENG-12363.
Williamson, E., C. P. Pantelides, H.-E. Blomgren, and D. Rammer. 2023b. “Performance of beam-column connections with Mass Ply Lam and steel dowels under cyclic loads.” J. Struct. Eng. 149 (6): 04023057. https://doi.org/10.1061/JSENDH.STENG-11569.
Williamson, E., C. P. Pantelides, H.-E. Blomgren, and D. Rammer. 2024. “Seismic performance of timber frames with timber buckling-restrained braces.” J. Struct. Eng. 150 (6): 04024048. https://doi.org/10.1061/JSENDH.STENG-12877.
Yousef-beik S. M. M., A. Hashemi, S. Veismoradi, and P. Quenneville. 2020. “Self-centering bracing system: Avoidance of elastic buckling for braces with one intermediate damper.” In Proc., New Zealand Society of Earthquake Engineering (NZSEE) Conf. Lausanne, Switzerland: Presses Polytechniques et Universitaires Romandes.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Aug 23, 2023
Accepted: Mar 18, 2024
Published online: Jun 21, 2024
Published in print: Sep 1, 2024
Discussion open until: Nov 21, 2024
ASCE Technical Topics:
- Bracing
- Buckling
- Building materials
- Construction engineering
- Construction methods
- Continuum mechanics
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Forces (type)
- Frames
- Lateral forces
- Materials engineering
- Models (by type)
- Numerical models
- Solid mechanics
- Structural dynamics
- Structural engineering
- Structural members
- Structural systems
- Structures (by type)
- Wood and wood products
- Wood structures
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.