Tests of Cold-Formed Steel T-Joints with Semi-Oval Hollow Section Chord
Publication: Journal of Structural Engineering
Volume 149, Issue 8
Abstract
This paper presents a test campaign concerning the structural behavior of cold-formed steel T-joints with semi-oval hollow section (SOHS) chord. Three different sizes of SOHS and nine different sizes of rectangular hollow sections (RHS) or square hollow sections (SHS) were employed as chord and brace members, respectively, to fabricate the T-joint specimens. Robotic gas metal arc welding was adopted to connect the RHS/SHS brace to the flat flange of SOHS chord. The width ratio between brace and chord () ranged from 0.29 to 0.96. The brace-to-chord thickness ratio () ranged from 0.46 to 0.72, and the chord width-to-thickness ratio () ranged from 10.3 to 13.9. A total of 29 T-joint specimens were tested with the chord simply supported and the brace axially compressed. The joint failure strengths, load-deformation histories, and failure characteristics of cold-formed steel T-joints with a SOHS chord are presented and discussed. The behavior of T-joints with a SOHS chord resembled that of RHS/SHS T-joints because the brace was connected to the SOHS chord at the flat flange. The feasibility of the design provisions in current standards initially developed for RHS T-joints was examined. The comparisons demonstrate that the strength predictions by the current standards are quite conservative for T-joints with cold-formed steel SOHS chord. The possible reasons for conservatism in design strength predictions are analyzed and discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study are available upon reasonable request.
Acknowledgments
The authors are grateful to Shenyang Dongyang Special Section Tube for supplying the test specimens. The authors would also like to thank the support from the National Natural Science Foundation of China (No. 52108157) and the Shanghai Sailing Program, China (No. 20YF1419400).
References
AISI (American Iron and Steel Institute). 2016. North American Specification for the design of cold-formed steel structural members. AISI S100-16. Washington, DC: AISI.
ASTM. 2016. Standard test methods for tension testing of metallic materials. ASTM E8M-16. West Conshohocken, PA: ASTM.
AWS (American Welding Society). 2020. Structural welding code–steel. AWS D1.1/D1.1M. Miami: American Welding Society.
Carvalho, J. P., A. C. Lemonge, P. H. Hallak, and D. E. Vargas. 2020. “Simultaneous sizing, shape, and layout optimization and automatic member grouping of dome structures.” Structures 28 (Dec): 2188–2202. https://doi.org/10.1016/j.struct.2020.10.016.
CEN (European Committee for Standardization). 2005. Design of steel structures—Part 1.1: General rules and rules for buildings. EN 1993-1-1:2005. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2021. Design of steel structures–Part 1.8: Design of joints. PrEN 1993-1-8:2021. Brussels, Belgium: CEN.
Chen, M. T., A. Cai, M. Pandey, C. Shen, Y. Zhang, and L. Hu. 2023a. “Mechanical properties of high strength steels and weld metals at arctic low temperatures.” Thin-Walled Struct. 185 (Apr): 110543. https://doi.org/10.1016/j.tws.2023.110543.
Chen, M. T., Y. Chen, and B. Young. 2023b. “Experimental investigation on cold-formed steel elliptical hollow section T-joints.” Eng. Struct. 283 (May): 115593. https://doi.org/10.1016/j.engstruct.2023.115593.
Chen, M. T., M. Pandey, and B. Young. 2021a. “Mechanical properties of cold-formed steel semi-oval hollow sections after exposure to ISO-834 fire.” Thin-Walled Struct. 167 (Oct): 108202. https://doi.org/10.1016/j.tws.2021.108202.
Chen, M. T., M. Pandey, and B. Young. 2021b. “Post-fire residual material properties of cold-formed steel elliptical hollow sections.” J. Constr. Steel Res. 183 (Aug): 106723. https://doi.org/10.1016/j.jcsr.2021.106723.
Chen, M. T., and B. Young. 2018a. “Cross-sectional behavior of cold-formed steel semi-oval hollow sections.” Eng. Struct. 177 (Dec): 318–330. https://doi.org/10.1016/j.engstruct.2018.08.057.
Chen, M. T., and B. Young. 2018b. “Experimental and numerical investigation on pin-ended cold-formed steel semi-oval hollow section compression members.” J. Constr. Steel Res. 151 (Dec): 174–184. https://doi.org/10.1016/j.jcsr.2018.09.009.
Chen, M. T., and B. Young. 2019a. “Material properties and structural behavior of cold-formed steel elliptical hollow section stub columns.” Thin-Walled Struct. 134 (Jan): 111–126. https://doi.org/10.1016/j.tws.2018.07.055.
Chen, M. T., and B. Young. 2019b. “Structural behavior of cold-formed steel semi-oval hollow section beams.” Eng. Struct. 185 (Apr): 400–411. https://doi.org/10.1016/j.engstruct.2019.01.069.
Chen, M. T., and B. Young. 2019c. “Structural performance of cold-formed steel elliptical hollow section pin-ended columns.” Thin-Walled Struct. 136 (Mar): 267–279. https://doi.org/10.1016/j.tws.2018.11.024.
Chen, M. T., and B. Young. 2020a. “Beam-column tests of cold-formed steel elliptical hollow sections.” Eng. Struct. 210 (May): 109911. https://doi.org/10.1016/j.engstruct.2019.109911.
Chen, M. T., and B. Young. 2020b. “Tensile tests of cold-formed stainless steel tubes.” J. Struct. Eng. 146 (9): 04020165. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002738.
Chen, M. T., and B. Young. 2020c. “Tests of cold-formed normal and high strength steel tubes under tension.” Thin-Walled Struct. 153 (Aug): 106844. https://doi.org/10.1016/j.tws.2020.106844.
Chen, M. T., and B. Young. 2020d. “Tests of cold-formed steel semi-oval hollow section members under eccentric axial load.” J. Struct. Eng. 146 (4): 04020027. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002468.
Chen, M. T., and B. Young. 2021a. “Beam-column design of cold-formed steel semi-oval hollow non-slender sections.” Thin-Walled Struct. 162 (May): 107376. https://doi.org/10.1016/j.tws.2020.107376.
Chen, M. T., and B. Young. 2021b. “Numerical analysis and design of cold-formed steel elliptical hollow sections under combined compression and bending.” Eng. Struct. 241 (Aug): 112417. https://doi.org/10.1016/j.engstruct.2021.112417.
Chen, M. T., B. Young, A. D. Martins, D. Camotim, and P. B. Dinis. 2020a. “Experimental investigation on cold-formed steel stiffened lipped channel columns undergoing local-distortional interaction.” Thin-Walled Struct. 150 (May): 106682. https://doi.org/10.1016/j.tws.2020.106682.
Chen, M. T., B. Young, A. D. Martins, D. Camotim, and P. B. Dinis. 2020b. “Uniformly bent CFS lipped channel beams experiencing local-distortional interaction: Experimental investigation.” J. Constr. Steel Res. 170 (Jul): 106098. https://doi.org/10.1016/j.jcsr.2020.106098.
Chen, M. T., B. Young, A. D. Martins, D. Camotim, and P. B. Dinis. 2021c. “Experimental investigation on cold-formed steel lipped channel beams affected by local-distortional interaction under non-uniform bending.” Thin-Walled Struct. 161 (Apr): 107494. https://doi.org/10.1016/j.tws.2021.107494.
Chen, M. T., T. Zhang, and T. Young. 2023c. “Behavior of concrete-filled cold-formed steel built-up section stub columns.” Thin-Walled Struct 187 (Jun): 110692. https://doi.org/10.1016/j.tws.2023.110692.
Cheng, B., F. Huang, Y. Duan, and M. T. Chen. 2021. “Fatigue performance of bird-beak SHS Gap K-joints under brace in-plane force.” J. Struct. Eng. 147 (11): 04021167. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003143.
Ding, F. X., Z. Li, S. Cheng, and Z. W. Yu. 2016. “Composite action of octagonal concrete-filled steel tubular stub columns under axial loading.” Thin-Walled Struct. 107 (Oct): 453–461. https://doi.org/10.1016/j.tws.2016.07.012.
Fang, H., T. M. Chan, and B. Young. 2018. “Material properties and residual stresses of octagonal high strength steel hollow sections.” J. Constr. Steel Res. 148 (Sep): 479–490. https://doi.org/10.1016/j.jcsr.2018.06.007.
Guan, M., W. Liu, M. H. Lai, H. Du, J. Cui, and Y. Gan. 2019. “Seismic behavior of innovative composite walls with high-strength manufactured sand-concrete.” Eng. Struct. 195 (Sep): 182–199. https://doi.org/10.1016/j.engstruct.2019.05.096.
Ho, J. C. M., X. L. Ou, C. W. Li, W. Song, Q. Wang, and M. H. Lai. 2021. “Uni-axial behaviour of expansive CFST and DSCFST stub columns.” Eng. Struct. 237 (Jun): 112193. https://doi.org/10.1016/j.engstruct.2021.112193.
Huang, Y., and B. Young. 2014. “The art of coupon tests.” J. Constr. Steel Res. 96 (May): 159–175. https://doi.org/10.1016/j.jcsr.2014.01.010.
IIW (International Institute of Welding). 2012. Static design procedure for welded hollow-section joints—Recommendations. IIW Doc. XV-1402-12 and IIW Doc. XV-E-12-433. Paris: IIW.
ISO. 2013. Static design procedure for welded hollow-section joints—Recommendations. BS ISO 14346. Geneva: ISO.
Jiang, B., M. C. H. Yam, K. Ke, A. C. C. Lam, and Q. Zhao. 2020. “Block shear failure of S275 and S690 steel angles with single-line bolted connections.” J. Constr. Steel Res. 170 (Jul): 106068. https://doi.org/10.1016/j.jcsr.2020.106068.
Ke, K., Y. H. Chen, X. H. Zhou, M. C. H. Yam, and S. L. Hu. 2023a. “Experimental and numerical study of a brace-type hybrid damper with steel slit plates enhanced by friction mechanism.” Thin-Walled Struct. 182 (Jan): 110429. https://doi.org/10.1016/j.tws.2022.110429.
Ke, K., F. Wang, M. C. H. Yam, L. Deng, and Y. He. 2019. “A multi-stage-based nonlinear static procedure for estimating seismic demands of steel MRFs equipped with steel slit walls.” Eng. Struct. 183 (Mar): 1091–1108. https://doi.org/10.1016/j.engstruct.2019.01.029.
Ke, K., M. C. H. Yam, A. C. C. Lam, and K. F. Chung. 2018. “Local web buckling of single-coped beam connections with slender web.” J. Constr. Steel Res. 150 (Nov): 543–555. https://doi.org/10.1016/j.jcsr.2018.08.017.
Ke, K., M. C. H. Yam, P. Zhang, Y. Shi, Y. Liu, and S. Liu. 2023b. “Self-centering damper with multi-energy-dissipation mechanisms: Insights and structural seismic demand perspectives.” J. Constr. Steel Res. 204 (May): 107837. https://doi.org/10.1016/j.jcsr.2023.107837.
Ke, K., M. Zhang, M. C. H. Yam, A. C. C. Lam, J. Wang, and B. Jiang. 2022. “Block shear performance of double-line bolted S690 steel angles under uniaxial tension.” Thin-Walled Struct. 171 (Feb): 108668. https://doi.org/10.1016/j.tws.2021.108668.
Khodzhaiev, M., and U. Reuter. 2021. “Structural optimization of transmission towers using a novel Genetic Algorithm approach with a variable length genome.” Eng. Struct. 240 (Aug): 112306. https://doi.org/10.1016/j.engstruct.2021.112306.
Lai, M., K. Wu, X. Ou, M. Zeng, C. Li, and J. C. M. Ho. 2022. “Effect of concrete wet packing density on the uni-axial strength of manufactured sand CFST columns.” Struct. Concr. 23 (4): 2615–2629. https://doi.org/10.1002/suco.202100280.
Lai, M. H., S. A. M. Binhowimal, A. M. Griffith, L. Hanzic, Q. Wang, Z. Y. Chen, and J. C. M. Ho. 2021b. “Shrinkage design model of concrete incorporating wet packing density.” Constr. Build. Mater. 280 (Apr): 122448. https://doi.org/10.1016/j.conbuildmat.2021.122448.
Lai, M. H., M. T. Chen, F. M. Ren, and J. C. M. Ho. 2019. “Uni-axial behaviour of externally confined UHSCFST columns.” Thin-Walled Struct. 142 (Sep): 19–36. https://doi.org/10.1016/j.tws.2019.04.047.
Lai, M. H., A. M. Griffith, L. Hanzic, Q. Wang, and J. C. M. Ho. 2021a. “Interdependence of passing ability, dilatancy and wet packing density of concrete.” Constr. Build. Mater. 270 (Feb): 121440. https://doi.org/10.1016/j.conbuildmat.2020.121440.
Lai, M. H., C. W. Li, J. C. M. Ho, and M. T. Chen. 2020. “Experimental investigation on hollow-steel-tube columns with external confinements.” J. Constr. Steel Res. 166 (Mar): 105865. https://doi.org/10.1016/j.jcsr.2019.105865.
Lai, M. H., Y. H. Lin, Y. Y. Jin, Q. Fei, Z. C. Wang, and J. C. M. Ho. 2023. “Uni-axial behaviour of steel slag concrete-filled-steel-tube columns with external confinement.” Thin-Walled Struct. 185 (Apr): 110562. https://doi.org/10.1016/j.tws.2023.110562.
Lai, M. H., J. J. Zou, B. Y. Yao, J. C. M. Ho, X. Zhuang, and Q. Wang. 2021c. “Improving mechanical and microstructure of concrete by using BOF steel slag aggregate.” Constr. Build. Mater. 277 (Mar): 122269. https://doi.org/10.1016/j.conbuildmat.2021.122269.
Lin, X.-M., M. C. Yam, K. Ke, Q. He, and K.-F. Chung. 2022. “Investigation of block shear strength of high strength steel bolted connections.” J. Constr. Steel Res. 196 (Sep): 107407. https://doi.org/10.1016/j.jcsr.2022.107407.
Packer, J. A., J. Wardenier, X.-L. Zhao, G. Van der Vegte, and Y. Kurobane. 2009. Design guide for rectangular hollow section (RHS) joints under predominantly static loading. Zoetermeer, Netherlands: International Committee for the Development and Study of Tubular Structures.
Pandey, M., K.-F. Chung, and B. Young. 2021. “Design of cold-formed high strength steel tubular T-joints under compression loads.” Thin-Walled Struct. 164 (Jul): 107573. https://doi.org/10.1016/j.tws.2021.107573.
Pandey, M., and B. Young. 2019a. “Compression capacities of cold-formed high strength steel tubular T-joints.” J. Constr. Steel Res. 162 (Nov): 105650. https://doi.org/10.1016/j.jcsr.2019.05.040.
Pandey, M., and B. Young. 2019b. “Tests of cold-formed high strength steel tubular T-joints.” Thin-Walled Struct. 143 (Oct): 106200. https://doi.org/10.1016/j.tws.2019.106200.
Pandey, M., and B. Young. 2021. “Ultimate resistances of member-rotated cold-formed high strength steel tubular T-joints under compression loads.” Eng. Struct. 244 (Oct): 112601. https://doi.org/10.1016/j.engstruct.2021.112601.
Ren, Q. X., L. H. Han, D. Lam, and C. Hou. 2014. “Experiments on special-shaped CFST stub columns under axial compression.” J. Constr. Steel Res. 98 (Jul): 123–133. https://doi.org/10.1016/j.jcsr.2014.03.002.
Ren, F. M., S. Y. Tian, L. Gong, J. X. Mo, C. L. Lai, and M. H. Lai. 2023. “Seismic performance of a ring beam joint connecting FTCES column and RC/ESRC beam with NSC.” J. Build. Eng. 63 (Jan): 105366. https://doi.org/10.1016/j.jobe.2022.105366.
Shen, W., Y. Choo, J. Wardenier, J. Packer, and G. Van Der Vegte. 2014. “Static strength of axially loaded elliptical hollow section X joints with braces welded to wide sides of chord. I: Numerical investigations based on experimental tests.” J. Struct. Eng. 140 (1): 04013035. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000791.
Su, A., K. Jiang, Y. Liang, and O. Zhao. 2021a. “Post-fire behaviour and resistances of S690 high strength steel welded I-section stub columns.” Thin-Walled Struct. 169 (Dec): 108422. https://doi.org/10.1016/j.tws.2021.108422.
Su, A., K. Jiang, Y. Wang, and O. Zhao. 2023. “Experimental and numerical investigations into S960 ultra-high strength steel welded I-section stub columns after exposure to elevated temperatures.” Thin-Walled Struct. 183 (Feb): 110349. https://doi.org/10.1016/j.tws.2022.110349.
Su, A., Y. Liang, and O. Zhao. 2021b. “Experimental and numerical studies of S960 ultra-high strength steel welded I-section columns.” Thin-Walled Struct. 159 (Feb): 107166. https://doi.org/10.1016/j.tws.2020.107166.
Su, A., Y. Sun, Y. Liang, and O. Zhao. 2020. “Material properties and membrane residual stresses of S690 high strength steel welded I-sections after exposure to elevated temperatures.” Thin-Walled Struct. 152 (Jul): 106723. https://doi.org/10.1016/j.tws.2020.106723.
Sun, Y., A. He, Y. Liang, and O. Zhao. 2019a. “In-plane bending behaviour and capacities of S690 high strength steel welded I-section beams.” J. Constr. Steel Res. 162 (Nov): 105741. https://doi.org/10.1016/j.jcsr.2019.105741.
Sun, Y., Z. Liu, Y. Liang, and O. Zhao. 2019b. “Experimental and numerical investigations of hot-rolled austenitic stainless steel equal-leg angle sections.” Thin-Walled Struct. 144 (Nov): 106225. https://doi.org/10.1016/j.tws.2019.106225.
Wardenier, J., Y. Kurobane, J. A. Packer, G. Van der Vegte, and X. Zhao. 2008. Design guide for circular hollow section (CHS) joints under predominantly static loading. Zoetermeer, Netherlands: International Committee for the Development and Study of Tubular Structures.
Yam, M. C. H., K. Ke, B. Jiang, and A. C. C. Lam. 2020. “Net section resistance of bolted S690 steel angles subjected to tension.” Thin-Walled Struct. 151 (Jun): 106722. https://doi.org/10.1016/j.tws.2020.106722.
Yi, S., M. T. Chen, and B. Young. 2023a. “Design of concrete-filled cold-formed steel elliptical stub columns.” Eng. Struct. 276 (Feb): 115269. https://doi.org/10.1016/j.engstruct.2022.115269.
Yi, S., M. T. Chen, and B. Young. 2023b. “Stub column behavior of concrete-filled cold-formed steel semi-oval sections.” J. Struct. Eng. 149 (3): 04023001. https://doi.org/10.1061/JSENDH.STENG-11667.
Zhou, Z., Y. Chen, M. C. H. Yam, K. Ke, and X. He. 2023. “Experimental investigation of a high strength steel frame with curved knee braces subjected to extreme earthquakes.” Thin-Walled Struct. 185 (Apr): 110596. https://doi.org/10.1016/j.tws.2023.110596.
Zhou, Z., K. Ke, Y. Chen, and M. C. H. Yam. 2022. “High strength steel frames with curved knee braces: Performance-based damage-control design framework.” J. Constr. Steel Res. 196 (Sep): 107392. https://doi.org/10.1016/j.jcsr.2022.107392.
Zhu, J. Y., T. M. Chan, and B. Young. 2019. “Cross-sectional capacity of octagonal tubular steel stub columns under uniaxial compression.” Eng. Struct. 184 (Apr): 480–494. https://doi.org/10.1016/j.engstruct.2019.01.066.
Zuo, W., M. T. Chen, Y. Chen, O. Zhao, B. Cheng, and J. Zhao. 2023. “Additive manufacturing oriented parametric topology optimization design and numerical analysis of steel joints in Gridshell structures.” Thin-Walled Struct. https://doi.org/10.1016/j.tws.2023.110817.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 149 • Issue 8 • August 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Nov 22, 2022
Accepted: Mar 15, 2023
Published online: May 25, 2023
Published in print: Aug 1, 2023
Discussion open until: Oct 25, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Wenkang Zuo, Man-Tai Chen, Ben Young, Post-Fire Behavior of Cold-Formed Steel Semi-Oval Hollow Stub Columns, Journal of Structural Engineering, 10.1061/JSENDH.STENG-13392, 150, 10, (2024).