Axial Compressive Mechanical Behaviors of a Double-Layer Member
Publication: Journal of Structural Engineering
Volume 149, Issue 8
Abstract
The instability of structural members under axial compression most likely causes spatial structural collapse. Therefore, the configuration of double-layer members (DLMs) is proposed in this study to improve the stability of compression members. Experiments on four specimens (two single-layer members and two DLMs) were conducted, where the failure mechanism was revealed based on analysis of a validated finite-element (FE) model. Parametric studies were also performed to investigate the effects of different parameters on the compressive mechanical behaviors of the DLMs. Results showed that the desired failure mode of the DLMs was high-order buckling with torsion of the inner tube and no global buckling failure prior to contact between the outer tube and end plate (HTCG). Under the failure mode of HTCG, the ultimate load and ductility were greatly improved due to the constraint of the outer tube. Finally, predictions of the crucial loads derived from the equilibrium differential equation and empirical formula were in good agreement with the test and FE results.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research was supported by the National Natural Science Foundation of China (Grant Nos. 52178161 and 51608433). These financial supports are greatly acknowledged.
References
Chen, Y., C. L. Wang, C. Wang, and B. Zeng. 2022. “Experimental study and performance evaluation of compression members in space structures strengthened with assembled outer sleeves.” Thin-Walled Struct. 173 (Apr): 108999. https://doi.org/10.1016/j.tws.2022.108999.
Cimellaro, G. P., and M. Domaneschi. 2017. “Stability analysis of different types of steel scaffolds.” Eng. Struct. 152 (Dec): 535–548. https://doi.org/10.1016/j.engstruct.2017.07.091.
CMC (China Ministry of Construction). 2017. Standard for design of steel structures. GB/T 50017-2017. Beijing: CMC.
CMC (China Ministry of Construction). 2018. Seamless steel tubes for structural purposes. GB/T 8162-2018. Beijing: CMC.
CMC (China Ministry of Construction). 2021. Metallic materials—Tensile testing—Part 1: Method of test at room temperature. GB/T 228.1-2021. Beijing: CMC.
Filho, J. O. F., T. Tankova, H. Carvalho, C. Martins, and L. S. da Silva. 2022. “Experimental and numerical flexural buckling resistance of high strength steel columns and beam-columns.” Eng. Struct. 265 (Aug): 114414. https://doi.org/10.1016/j.engstruct.2022.114414.
Gong, P., W. H. Liu, B. Zeng, and Z. Zhou. 2022. “Experimental and numerical study on the axial compression performance of the prestressed sleeved members.” Thin-Walled Struct. 181 (Dec): 110049. https://doi.org/10.1016/j.tws.2022.110049.
Heshmati, M., R. Haghani, and M. Al-Emrani. 2015. “Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: State of the art.” Composites, Part B 81 (Nov): 259–275. https://doi.org/10.1016/j.compositesb.2015.07.014.
Heshmati, M., R. Haghani, M. Al-Emrani, and A. André. 2018. “On the strength prediction of adhesively bonded FRP-steel joints using cohesive zone modeling.” Theor. Appl. Fract. Mech. 93 (Feb): 64–78. https://doi.org/10.1016/j.tafmec.2017.06.022.
Hu, B., B. Q. Gao, S. L. Zhan, and C. Zhang. 2013a. “Theoretical and experimental study on load-carrying capacity of combined members consisted of inner and sleeved tubes.” Struct. Eng. Mech. 45 (1): 129–144. https://doi.org/10.12989/sem.2013.45.1.129.
Hu, L., B. Shen, K. J. Ma, C. G. Deng, and B. W. Yan. 2013b. “A mechanical model and experimental investigations for axially compressed sleeved column.” J. Constr. Steel Res. 89 (Oct): 107–120. https://doi.org/10.1016/j.jcsr.2013.06.014.
Kiakojouri, F., V. De Biagi, B. Chiaia, and M. R. Sheidaii. 2022. “Strengthening and retrofitting techniques to mitigate progressive collapse: A critical review and future research agenda.” Eng. Struct. 262 (Jul): 114274. https://doi.org/10.1016/j.engstruct.2022.114274.
Meng, X., and L. Gardner. 2022. “Stability and design of normal and high strength steel CHS beam-columns.” Eng. Struct. 251 (Jan): 113361. https://doi.org/10.1016/j.engstruct.2021.113361.
Ni, G. B., C. X. Zhang, D. F. Li, Q. Chen, and Z. Y. Wang. 2021. “Collapse of the spatial double-layer cylinder shell by experimental study.” Eng. Struct. 245 (Oct): 112862. https://doi.org/10.1016/j.engstruct.2021.112862.
Schmidt, L. C., and A. Hanaor. 1979. “Force limiting devices in space trusses.” J. Struct. Div. 105 (5): 939–951. https://doi.org/10.1061/JSDEAG.0005147.
Sitler, B., T. Takeuchi, R. Matsui, M. Terashima, and Y. Terazawa. 2020. “Experimental investigation of a multistage buckling-restrained brace.” Eng. Struct. 213 (Jun): 110482. https://doi.org/10.1016/j.engstruct.2020.110482.
Szewczak, I., K. Rzeszut, and P. Rozylo. 2021. “Structural behaviour of steel cold-formed sigma beams strengthened with bonded steel tapes.” Thin-Walled Struct. 159 (Feb): 107295. https://doi.org/10.1016/j.tws.2020.107295.
Tian, L. M., M. H. Li, L. Li, D. Y. Li, and C. Bai. 2023. “Novel joint for improving the collapse resistance of steel frame structures in column-loss scenarios.” Thin-Walled Struct. 182 (Jan): 110219. https://doi.org/10.1016/j.tws.2022.110219.
Tian, L. M., J. P. Wei, and J. P. Hao. 2019. “Optimisation of long-span single-layer spatial grid structures to resist progressive collapse.” Eng. Struct. 188 (Jun): 394–405. https://doi.org/10.1016/j.engstruct.2019.03.025.
Tian, L. M., J. P. Wei, Q. X. Huang, and J. W. Ju. 2021. “Collapse-resistant performance of long-span single-layer spatial grid structures subjected to equivalent sudden joint loads.” J. Struct. Eng. 147 (1): 04020309. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002904.
Wang, C. L., Y. Qing, J. Wu, J. X. Wang, and Z. C. Gu. 2020. “Analytical and experimental studies on buckling-restrained brace with gap-supported tendon protection.” J. Constr. Steel Res. 164 (Jan): 105807. https://doi.org/10.1016/j.jcsr.2019.105807.
Wei, Y., J. W. Bai, Y. R. Zhang, K. T. Miao, and K. Q. Zheng. 2021. “Compressive performance of high-strength seawater and sea sand concrete filled circular FRP-steel composite tube columns.” Eng. Struct. 240 (Aug): 112357. https://doi.org/10.1016/j.engstruct.2021.112357.
Ying, W. D., C. G. Deng, and C. H. Zhang. 2021. “Static behaviors and applications of buckling monitoring members with rigid ends.” Processes 9 (5): 836. https://doi.org/10.3390/pr9050836.
Zhang, C. H., and C. G. Deng. 2019a. “Static behaviour of latticed-sleeved compression member with strip core.” Thin-Walled Struct. 143 (Oct): 194–206. https://doi.org/10.1016/j.tws.2019.106194.
Zhang, C. H., and C. G. Deng. 2019b. “Static behaviors of buckling-monitoring members.” Eng. Struct. 178 (Jan): 55–69. https://doi.org/10.1016/j.engstruct.2018.09.086.
Zhang, Y. R., Y. Wei, K. T. Miao, and B. Li. 2022. “A novel seawater and sea sand concrete-filled FRP-carbon steel composite tube column: Cyclic axial compression behaviour and modeling.” Eng. Struct. 252 (Feb): 113531. https://doi.org/10.1016/j.engstruct.2022.114872.
Zhao, X. F., P. Tan, H. T. Ma, F. L. Zhou, and B. Shen. 2021. “Analysis and application of sleeved column considering the extension of the inner core.” Thin-Walled Struct. 167 (Oct): 108184. https://doi.org/10.1016/j.tws.2021.108184.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Oct 20, 2022
Accepted: Apr 24, 2023
Published online: Jun 7, 2023
Published in print: Aug 1, 2023
Discussion open until: Nov 7, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.