Seismic Behavior of 3D Joint between Concrete Encased Steel Cross-Shaped Column and Steel Beam: Experimental Study
Publication: Journal of Structural Engineering
Volume 148, Issue 12
Abstract
This paper presents an experimental study on the seismic performance of a three-dimensional (3D) joint between concrete encased steel cross-shaped (CESC) columns and steel beams. Cyclic loading test of five interior joints was performed to investigate failure modes, hysteretic behavior and strain distribution. Steel configuration, load ratio, and loading angle were considered. Seismic performance was evaluated based on peak load, stiffness degradation, energy dissipation, and ductility factor for these joints. The test results indicated that the seismic performance of joints with solid-web steel is much better than that of joints with T- and U-shaped steel trusses. The ultimate drift ratio of all joints was larger than the minimum limit of 1/50 in American and Chinese standards. The strain results showed that the influence of loading angle on the shear capacity of 3D joints cannot be ignored. Ultimately, because of the rhombic coordinate relationship between shear strength and loading angle, the formulas established in this paper can be adopted to assess the shear capacity of 3D joints between CESC columns and steel beams.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all of the data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research was sponsored by the National Natural Science Foundation of China through Grant Nos. 51578163 and 52220105005, the Bagui Scholars Special Funding Project through Grant No. 79-2019, and the Guangxi Science and Technology Base and Talent Special Project through Grant No. AD21075031. It was also partially supported by the Projects Funded by the Central Government to Guide Local Scientific and Technological Development (Grant No. ZY21195010) and the Innovation Project of Guangxi Graduate Education (Grant No. YCBZ2021020). The financial support is highly appreciated.
References
ASCE. 2010. Minimum design loads for buildings and other structures. ASCE 7-10. Reston, VA: ASCE.
ASTM. 2012. Standard specification for test coupons for steel castings. ASTM A1067/A1067M-12a. West Conshohocken, PA: ASTM.
Cai, J., H. Hao, T. Ozbakkaloglu, Y. Zhang, and J. Pan. 2020. “Behavior of geopolymeric recycled aggregate concrete-filled FRP tube (GRACFFT) columns under lateral cyclic loading.” Eng. Struct. 222 (Nov): 111047. https://doi.org/10.1016/j.engstruct.2020.111047.
Chen, C.-C., and K.-T. Lin. 2009. “Behavior and strength of steel reinforced concrete beam–column joints with two-side force inputs.” J. Constr. Steel Res. 65 (3): 641–649. https://doi.org/10.1016/j.jcsr.2008.03.010.
Chen, Z., D. Xu, J. Xu, and N. Wang. 2021. “Seismic behavior and strength of L-shaped steel reinforced concrete column-concrete beam planar and spatial joints.” Steel Compos. Struct. 39 (3): 337–352. https://doi.org/10.12989/scs.2021.39.3.337.
Chen, Z., J. Xu, and J. Xue. 2015a. “Hysteretic behavior of special shaped columns composed of steel and reinforced concrete (SRC).” Earthquake Eng. Eng. Vibr. 14 (2): 329–345. https://doi.org/10.1007/s11803-015-0026-1.
Chen, Z., J. Xue, H. Zhao, and Y. Shao. 2007. “Analysis on the shear capacity of irregularly-shaped steel reinforced concrete columns under cyclic reversed loading.” China Civ. Eng. J. 40 (7): 30–36. https://doi.org/10.3321/j.issn:1000-131x.2007.07.006.
Chen, Z. P., J. J. Xu, and Y. L. Chen. 2016. “Load ratio limit values for steel reinforced concrete (SRC) special shaped columns.” Steel Compos. Struct. 20 (2): 295–316. https://doi.org/10.12989/scs.2016.20.2.295.
Chen, Z. P., J. J. Xu, Y. L. Chen, and J. Y. Xue. 2015b. “Seismic behavior of steel reinforced concrete (SRC) T-shaped column-beam planar and 3D hybrid joints under cyclic loads.” Earthquakes Struct. 8 (3): 555–572. https://doi.org/10.12989/eas.2015.8.3.555.
Chu, L., Y. Tian, D. Li, Y. He, and H. Feng. 2021. “Shear behavior of steel reinforced concrete column-steel beam joints with or without reinforced concrete slab.” J. Build. Eng. 35 (Mar): 102063. https://doi.org/10.1016/j.jobe.2020.102063.
CMC (China Ministry of Construction). 2002. Standard for test method of mechanical properties on ordinary concrete. [In Chinese.] GBT 50081-2002. Beijing: CMC.
CMC (China Ministry of Construction). 2010a. Code for design concrete structures. [In Chinese.] GB 50010-2010. Beijing: CMC.
CMC (China Ministry of Construction). 2010b. Code for seismic design of buildings. [In Chinese.] GB 50011-2010. Beijing: CMC.
CMC (China Ministry of Construction). 2010c. Metallic materials—Tensile testing—Part 1: Method of test at room temperature. [In Chinese.] GB/T 228.1-2010. Beijing: CMC.
CMC (China Ministry of Construction). 2015. Specification for test methods of seismic buildings. [In Chinese.] JGJ/T 101-2015. Beijing: CMC.
CSCS (China Steel Construction Society). 2021. Technical standard for steel reinforced concrete structures with specially-shaped columns. [In Chinese.] T/CSCS 014-2021. Beijing: CSCS.
Elmy, M. H., and S. Nakamura. 2017. “Static and seismic behaviours of innovative hybrid steel reinforced concrete bridge.” J. Constr. Steel Res. 138 (Nov): 701–713. https://doi.org/10.1016/j.jcsr.2017.08.025.
Fan, J., Q. Li, J. Nie, and H. Zhou. 2014. “Experimental study on the seismic performance of 3D joints between concrete-filled square steel tubular columns and composite beams.” J. Struct. Eng. 140 (12): 04014094. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001013.
Fan, J., C. Liu, Y. Yang, Y. Bai, and C. Wu. 2015. “Shear capacity of 3D composite CFT joints subjected to symmetric loading condition.” J. Constr. Steel Res. 112 (Sep): 242–251. https://doi.org/10.1016/j.jcsr.2015.05.005.
Gao, S., L. Guo, and Z. Zhang. 2021. “Anti-collapse performance of composite frame with special-shaped MCFST columns.” Eng. Struct. 245 (Oct): 112917. https://doi.org/10.1016/j.engstruct.2021.112917.
Han, L. 2007. Concrete-filled steel tubular structure: Theory and practice. [In Chinese.] Beijing: Science Press.
Jin, H., W. Xue, X. Yang, and P. Li. 2012. “Experimental research on seismic behavior of connection between prestressed steel reinforced concrete beam and concrete-filled steel tubular column.” J. Build. Struct. 33 (8): 66–74. https://doi.org/10.14006/j.jzjgxb.2012.08.010.
Li, L., J. B. Mander, and R. P. Dhakal. 2008. “Bidirectional cyclic loading experiment on a 3D beam–column joint designed for damage avoidance.” J. Struct. Eng. 134 (11): 1733–1742. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:11(1733).
Li, W., L.-F. Xu, and W.-W. Qian. 2021. “Seismic performance of 3-D steel beam to concrete-encased CFST column joints: Tests.” Eng. Struct. 232 (Apr): 111793. https://doi.org/10.1016/j.engstruct.2020.111793.
Li, X., Z. Fang, and H. Chen. 2009. “Experimental study on two-dimensional loading quasi-static of prestressed concrete spatial frame joint.” J. Earthquake Eng. Eng. Vibr. 29 (1): 70–77. https://doi.org/10.13197/j.eeev.2009.01.012.
Liu, Z. Q., J. Y. Xue, and H. T. Zhao. 2016. “Seismic behavior of steel reinforced concrete special-shaped column-beam joints.” Earthquakes Struct. 11 (4): 665–680. https://doi.org/10.12989/eas.2016.11.4.665.
Mirza, S. A., and E. A. Lacroix. 2004. “Comparative strength analyses of concrete-encased steel composite columns.” J. Struct. Eng. 130 (12): 1941–1953. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:12(1941).
Mostofinejad, D., and M. Hajrasouliha. 2018. “Shear retrofitting of corner 3D-reinforced concrete beam-column joints using externally bonded CFRP reinforcement on grooves.” J. Compos. Constr. 22 (5): 04018037. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000862.
Wilson, E. L., and A. Habibullah. 1987. “Static and dynamic analysis of multi-story buildings, including P-delta effects.” Earthquake Spectra 3 (2): 289–298. https://doi.org/10.1193/1.1585429.
Xiang, P., Z. H. Deng, Y. S. Su, H. P. Wang, and Y. F. Wan. 2017. “Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading.” Adv. Struct. Eng. 20 (3): 446–460. https://doi.org/10.1177/1369433216653841.
Xiang, P., Y. Lin, and W. Huang. 2020. “Investigation on shear capacity of joints between steel reinforced concrete special-shaped column and reinforced concrete beam.” Front. Mater. 7 (Sep): 588296. https://doi.org/10.3389/fmats.2020.588296.
Xiang, P., and H. P. Wang. 2016. “Structural performances of steel reinforced concrete special shaped column–beam joints under bidirectional low-cyclic reversed loading.” Am. J. Civ. Eng. 5 (1): 16. https://doi.org/10.11648/j.ajce.20170501.13.
Xu, J. J., Z. P. Chen, S. Q. Zhang, and J. Y. Xue. 2018. “Seismic performance evolution and transmission mechanism, design philosophy of cross-shaped steel reinforced concrete columns and the corresponding joints.” China Civ. Eng. J. 51 (7): 75–86. https://doi.org/10.15951/j.tmgcxb.2018.07.009.
Xu, Z.-H., G.-L. Bai, and J.-Q. Zhao. 2021. “Shear mechanism and capacity calculation on SRC special-shaped joints.” Eng. Struct. 247 (Nov): 113080. https://doi.org/10.1016/j.engstruct.2021.113080.
Xue, J. Y. 2007. Steel-concrete composite structures. Wuhan, China: Huazhong University of Science and Technology Press.
Xue, J. Y., Z. P. Chen, and H. T. Zhao. 2012. “Shear mechanism and bearing capacity calculation on steel reinforced concrete special-shaped columns.” Steel Compos. Struct. 13 (5): 473–487. https://doi.org/10.12989/scs.2012.13.5.473.
Xue, J. Y., Y. Liu, H. T. Zhao, and Z. P. Chen. 2011. “Experimental study of the bearing capacity of steel reinforced concrete specially-shaped column-beam joint.” China Civ. Eng. J. 44 (5): 41–48. https://doi.org/10.15951/j.tmgcxb.2011.05.014.
Yao, Q. F., and P. Chen. 2001. Civil engineering structural experiment. Beijing: China Architecture & Building Press.
Yin, F., S.-D. Xue, W.-L. Cao, H.-Y. Dong, and H.-P. Wu. 2020. “Experimental and analytical study of seismic behavior of special-shaped multicell composite concrete-filled steel tube columns.” J. Struct. Eng. 146 (1): 04019170. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002442.
Zhang, J., and J. Jia. 2016. “Experimental study on seismic behavior of composite frame consisting of SRC beams and SRUHSC columns subjected to cyclic loading.” Constr. Build. Mater. 125 (Oct): 1055–1065. https://doi.org/10.1016/j.conbuildmat.2016.08.157.
Zhou, J., Z. Chen, W. Xu, H. Liao, and N. Wang. 2022a. “Seismic behavior of 3-D beam to L-shaped concrete encased steel composite column joint: An experimental study.” J. Build. Eng. 52 (Jul): 104437. https://doi.org/10.1016/j.jobe.2022.104437.
Zhou, J., Z. Chen, W. Zheng, and H. Liao. 2022b. “Seismic behavior of steel reinforced concrete column with welded studs subjected to combined action of compression-bending-shear-torsion.” Eng. Struct. 252 (Feb): 113727. https://doi.org/10.1016/j.engstruct.2021.113727.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Mar 7, 2022
Accepted: Aug 12, 2022
Published online: Oct 10, 2022
Published in print: Dec 1, 2022
Discussion open until: Mar 10, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.