The Neutral Axis Concept in Asphalt Pavement Analysis
Publication: Journal of Transportation Engineering, Part B: Pavements
Volume 150, Issue 4
Abstract
The neutral axis concept is a fundamental and useful entity in elastic beamlike and platelike structures (where it is called the neutral surface). It distinguishes between tensile and compressive zones, governs how moments are redistributed when entering an inelastic range, and functions as a damage-sensitive attribute in condition monitoring applications. The objective of this study was to investigate the existence and characteristics of the neutral axis concept for layered elasticity—which is the most prevalent theory in the design and analysis of asphalt pavements. The investigation was done in silico by first examining the concept for an isotropic half-space, and then for two- and three-layered half-spaces. The main findings from these synthetic investigations were (1) more than one neutral surface can exist; (2) stress and strain neutral surfaces do not overlap; and (3) locations of the neutral surfaces are affected by the loading configuration. An actual case study involving Interstate 475 was examined to demonstrate the practical implications of these findings. It is concluded that all familiar/expected neutral axis characteristics deviate considerably when carried over to layered elastic theory. It is thus recommended to avoid utilizing intuition obtained from the classic neutral axis concept to interpret the mechanistic behavior of asphalt pavements.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
References
AASHTO. 2023. “AASHTOWare pavement ME design.” Accessed February 15, 2024. https://www.aashtoware.org/products/pavement/pavement-me-design/.
Al Bacha, M., P. Hornych, M.-L. Nguyen, O. Chupin, and F. Hammoum. 2023. “Evaluation of the influence of interface bonding condition on mechanical responses of bituminous pavement surface layers.” Transp. Eng. 14 (Dec): 100211. https://doi.org/10.1016/j.treng.2023.100211.
Al-Qadi, I. L., M. A. Elseifi, P. J. Yoo, S. H. Dessouky, N. Gibson, T. Harman, J. D’Angelo, and K. Petros. 2008. “Accuracy of current complex modulus selection procedure from vehicular load pulse: NCHRP project 1-37a mechanistic-empirical pavement design guide.” Transp. Res. Rec. 2087 (1): 81–90. https://doi.org/10.3141/2087-09.
ARA (Applied Research Associates). 2004. Guide for mechanical-empirical design of new and rehabilitated pavement structures, NCHRP 1-37. Washington, DC: Transportation Research Board.
Bauchau, O. A., and J. I. Craig. 2009. Vol. 163 of Structural analysis: With applications to aerospace structures. Dordrecht, Netherlands: Springer.
Bernardo, L., and S. Lopes. 2004. “Neutral axis depth versus flexural ductility in high-strength concrete beams.” J. Struct. Eng. 130 (3): 452–459. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(452).
Bleech, C. 2018. Roads innovation task force report. Lansing, MI: Michigan Dept. of Transportation.
Burmister, D. M. 1943. “The theory of stress and displacements in layered systems and applications to the design of airport runways” Highway Res. Board Proc. 23: 126–148.
Burmister, D. M. 1945a. “The general theory of stresses and displacements in layered soil systems. II.” J. Appl. Phys. 16 (3): 126–127. https://doi.org/10.1063/1.1707562.
Burmister, D. M. 1945b. “The general theory of stresses and displacements in layered soil systems. III.” J. Appl. Phys. 16 (5): 296–302. https://doi.org/10.1063/1.1707590.
Burmister, D. M. 1945c. “The general theory of stresses and displacements in layered systems. I.” J. Appl. Phys. 16 (2): 89–94. https://doi.org/10.1063/1.1707558.
Castro, A. J., N. Tran, M. Robbins, D. H. Timm, and C. Wagner. 2017. “Further evaluation of limiting strain criteria for perpetual asphalt pavement design.” Transp. Res. Rec. 2640 (1): 41–48. https://doi.org/10.3141/2640-05.
Chadbourn, B. A., D. E. Newcomb, and D. H. Timm. 1997. “Measured and theoretical comparisons of traffic loads and pavement response distributions.” In Proc., Eighth Int. Conf. on Asphalt Pavements, 229–238. Seattle: Univ. of Washington.
Davis, P. M., R. Gupta, and A. Sinha. 2012. “Revisiting the neutral axis in wood beams.” Holzforschung 66 (4): 497–503. https://doi.org/10.1515/hf.2011.180.
Dempsey, B. J., and M. R. Thompson. 1970. A heat-transfer model for evaluating frost action and temperature-related effects in multilayered pavement systems. Urbana, IL: Univ. of Illinois.
Foshee, M., and D. Timm. 2022. “The influence of asphalt/base modulus ratio on strain mode reversal in flexible pavements.” In Proc., Eleventh Int. Conf. on the Bearing Capacity of Roads, Railways and Airfields, 108–117. Boca Raton, FL: CRC Press.
Habibpour, M., A. Ali, D. Offenbacker, Y. Mehta, M. Elshaer, and C. Decarlo. 2023. “Full-scale evaluation of geosynthetic-reinforced hot mix asphalt.” Transp. Res. Rec. 2677 (9): 713–729. https://doi.org/10.1177/03611981231160154.
Heran, E. 1997. Mechanics of materials 1: An introduction to the mechanics of elastic and plastic deformation solids and structural materials. London: Butterworth-Heinemann.
Horak, E. 1988. “Application of equivalent-layer-thickness concept in a mechanistic rehabilitation design procedure” Transp. Res. Rec. 1207: 69–75.
Huang, Y. 2004. Vol. 2 of Pavement analysis and design. Upper Saddle River, NJ: Pearson Prentice Hall.
Jong, D. L., M. Peutz, and A. Korswagen. 1979. Computer program bisar, layered systems under normal and tangential surface loads. Amsterdam, Netherlands: Koninklijke/Shell Laboratorium.
Kutay, M. E., and M. Lanotte. 2020. “Formulations of the pavement performance prediction models in the mechanistic-empirical asphalt pavement analysis (MEAPA) web application.” Accessed February 15, 2024. https://paveapps.com/meapaapp2/images/MEAPADocumentation_V3.pdf.
Levenberg, E. 2016. “ELLEA1: Isotropic layered elasticity in Excel: Pavement analysis tool for students and engineers.” Accessed February 15, 2024. https://orbit.dtu.dk/en/publications/ellea1-isotropic-layered-elasticity-in-excel-pavement-analysis-to.
Levenberg, E. 2020. Pavement mechanics: Lecture notes. 1st ed. Gentofte, Denmark: Eyal Levenberg.
Levenberg, E., R. S. McDaniel, and J. Olek. 2009. Validation of NCAT structural test track experiment using INDOT APT facility. FHWA/IN/JTRP-2008/26. West Lafayette, IN: Joint Transportation Research Program, Indiana Dept. of Transportation and Purdue Univ.
Li, H., J. Li, Y. Xin, H. Hao, T. D. Le, and T. M. Pham. 2022. “Prestress force monitoring and quantification of precast segmental beams through neutral axis location identification.” Appl. Sci. 12 (5): 2756. https://doi.org/10.3390/app12052756.
Lou, T., S. M. Lopes, and A. V. Lopes. 2015. “Neutral axis depth and moment redistribution in FRP and steel reinforced concrete continuous beams.” Composites, Part B 70 (Mar): 44–52. https://doi.org/10.1016/j.compositesb.2014.10.044.
Molenaar, A., and C. van Gurp. 1980. “Optimization of the thickness design of asphalt concrete.” In Proc., 10th ARRB Conf., Vol. 10, Part 2, 31–44. Sydney, Australia: Australian Road Research Board.
Muslim, H., M. Ghazavi, M. Kutay, S. Haider, B. Cetin, C. Santos, N. Buch, W. Hansen, H. Coban, and M. Lanotte. 2023. Evaluation of mdot’s long-life pilot projects. Lansing, MI: Michigan Dept. of Transportation.
Nguyen, M. L., O. Chupin, J. Blanc, J. M. Piau, P. Hornych, and Y. Lefeuvre. 2020. “Investigation of crack propagation in asphalt pavement based on apt result and lefm analysis.” J. Test. Eval. 48 (1): 161–177. https://doi.org/10.1520/JTE20180933.
Nielsen, J., E. Levenberg, and A. Skar. 2022. “Mechanistic modelling of grid-reinforced milled-and-overlaid asphalt pavements.” Int. J. Pavement Eng. 24 (2): 2072502. https://doi.org/10.1080/10298436.2022.2072502.
Pierce, L. M., and M. Ginger. 2014. Implementation of the AASHTO mechanistic-empirical pavement design guide and software. Washington, DC: National Academies Press.
Schiffman, R. L. 1962. “General analysis of stresses and displacements in layered elastic systems.” In Vol. 1 of Proc., Int. Conf. on the Structural Design of Asphalt Pavements. Ann Arbor, MI: Univ. of Michigan.
Shi, Y., J. A. Rogers, C. Gao, and Y. Huang. 2014. “Multiple neutral axes in bending of a multiple-layer beam with extremely different elastic properties.” J. Appl. Mech. 81 (11): 114501. https://doi.org/10.1115/1.4028465.
Sigurdardottir, D. H., and B. Glisic. 2015. “The neutral axis location for structural health monitoring: An overview.” J. Civ. Struct. Health Monit. 5 (5): 703–713. https://doi.org/10.1007/s13349-015-0136-5.
Singh, G., G. Rao, and N. Iyengar. 1994. “Geometrically nonlinear flexural response characteristics of shear deformable unsymmetrically laminated plates.” Comput. Struct. 53 (1): 69–81. https://doi.org/10.1016/0045-7949(94)90131-7.
Skar, A., and S. Andersen. 2020. “Alva: An adaptive MATLAB package for layered viscoelastic analysis.” J. Open Source Software 5 (55): 2548. https://doi.org/10.21105/joss.02548.
Timm, D. H., and D. E. Newcomb. 2006. “Perpetual pavement design for flexible pavements in the US.” Int. J. Pavement Eng. 7 (2): 111–119. https://doi.org/10.1080/10298430600619182.
Xia, Y., X. Lei, P. Wang, G. Liu, and L. Sun. 2020. “Long-term performance monitoring and assessment of concrete beam bridges using neutral axis indicator.” Struct. Control Health Monit. 27 (12): e2637. https://doi.org/10.1002/stc.2637.
Yao, K., X. Jiang, J. Jiang, Z. Yang, and Y. Qiu. 2021. “Influence of modulus of base layer on the strain distribution for asphalt pavement.” Baltic J. Road Bridge Eng. 16 (4): 126–152. https://doi.org/10.7250/bjrbe.2021-16.542.
Yuya, W., T. Yasushi, K. Futoshi, and W. Kazuhiro. 2023. “Evaluation of the effect of interlayer bonding condition on the deterioration of asphalt pavement.” Transp. Res. Rec. 2677 (7): 500–508. https://doi.org/10.1177/03611981231153649.
Zgheib, E., A. Alhussein, M. F. Slim, K. Khalil, and M. François. 2019. “Multilayered models for determining the young’s modulus of thin films by means of impulse excitation technique.” Mech. Mater. 137 (Oct): 103143. https://doi.org/10.1016/j.mechmat.2019.103143.
Information & Authors
Information
Published In
Journal of Transportation Engineering, Part B: Pavements
Volume 150 • Issue 4 • December 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Oct 17, 2023
Accepted: Jun 13, 2024
Published online: Sep 9, 2024
Published in print: Dec 1, 2024
Discussion open until: Feb 9, 2025
ASCE Technical Topics:
- Asphalt pavements
- Case studies
- Design (by type)
- Elastic analysis
- Engineering fundamentals
- Engineering mechanics
- Geometry
- Half space
- Highway and road design
- Highway engineering
- Highway transportation
- Infrastructure
- Layered systems
- Material mechanics
- Material properties
- Materials engineering
- Mathematics
- Methodology (by type)
- Pavement design
- Pavements
- Research methods (by type)
- Sight distances
- Structural analysis
- Structural engineering
- Systems engineering
- Systems management
- Transportation engineering
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.