Investigation of the Effect of Pavement Albedo on Urban Temperature Using Computational Fluid Dynamics Simulation
Publication: Journal of Transportation Engineering, Part B: Pavements
Volume 149, Issue 4
Abstract
This paper investigated the effect of the changed albedo of colored pavement on the urban temperature. The surface albedo of different conventional and colored pavement slabs was measured in the laboratory. Numerical simulations were conducted to determine the relationship between pavement albedo and the temperatures of pavement and its surrounding environment in the local urban. Results showed that colored porous portland cement concrete (PPCC) slabs have higher albedo values than conventional gray PPCC and black asphalt concrete, but conventional dense portland cement concrete (DPCC) has the highest albedo value owing to its smooth surface. The temperature of colored PPCC (except black PPCC) slabs at 1-cm depth was about 1°C–6°C lower than that of conventional gray PPCC due to the high albedo, and the green PPCC slab had the best cooling effect among all PPCCs. The simulated temperature profiles of the PPCC slab were found to be in good agreement with the laboratory test results. The local urban simulation showed that the colored pavement has a noticeable effect on reducing pavement surface temperature and nearby air temperature. Compared with open-graded friction course, which had an albedo value of 0.058, conventional gray DPCC with an albedo value of 0.32 had a temperature at 0.2 m below the pavement surface that was 0.83°C lower at 3:00 p.m. of a typical summer day.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The experimental work presented herein was sponsored by the National Natural Science Foundation of China (No. 52178421), the Natural Science Foundation of Jiangsu Province (No. BK20191300), and the Open Fund of National Engineering Laboratory of Highway Maintenance Technology (Changsha University of Science & Technology) (No. kfj180107) in China.
References
Abu-Hamdeh, N. H. 2003. “Thermal properties of soils as affected by density and water content.” Biosyst. Eng. 86 (1): 97–102. https://doi.org/10.1016/S1537-5110(03)00112-0.
Aflaki, A., M. Mirnezhad, A. Ghaffarianhoseini, A. Ghaffarianhoseini, H. Omrany, Z.-H. Wang, and H. Akbari. 2017. “Urban heat island mitigation strategies a state-of-the-art review on Kuala Lumpur, Singapore and Hong Kong.” Cities 62 (Feb): 131–145. https://doi.org/10.1016/j.cities.2016.09.003.
Allegrini, J., V. Dorer, and J. Carmeliet. 2015. “Influence of morphologies on the microclimate in urban neighbourhoods.” J. Wind Eng. Ind. Aerodyn. 144 (Sep): 108–117. https://doi.org/10.1016/j.jweia.2015.03.024.
Anak Guntor, N. A., M. F. Md Din, M. Ponraj, and K. Iwao. 2014. “Thermal performance of developed coating material as cool pavement material for tropical regions.” J. Mater. Civ. Eng. 26 (4): 755–760. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000859.
Battisti, A., F. Laureti, M. Zinzi, and G. Volpicelli. 2018. “Climate mitigation and adaptation strategies for roofs and pavements: A case study at Sapienza University campus.” Sustainability 10 (10): 3788. https://doi.org/10.3390/su10103788.
Blocken, B., W. D. Janssen, and T. van Hooff. 2012. “CFD simulation for pedestrian wind comfort and wind safety in urban areas: General decision framework and case study for the Eindhoven University campus.” Environ. Modell. Software 30 (Apr): 15–34. https://doi.org/10.1016/j.envsoft.2011.11.009.
Chen, J., R. Chu, H. Wang, L. Zhang, X. Chen, and Y. Du. 2019a. “Alleviating urban heat island effect using high-conductivity permeable concrete pavement.” J. Cleaner Prod. 237 (Nov): 117722. https://doi.org/10.1016/j.jclepro.2019.117722.
Chen, J., J. Li, H. Wang, W. Huang, W. Sun, and T. Xu. 2019b. “Preparation and effectiveness of composite phase change material for performance improvement of open graded friction course.” J. Cleaner Prod. 214 (Mar): 259–269. https://doi.org/10.1016/j.jclepro.2019.01.001.
Chen, J., Z. Zhou, Z. Sun, J. Zhang, and Z. Wang. 2020. “Laboratory measurement for albedo and internal temperature of colored pavement.” [In Chinese.] J. Harbin Inst. Technol. 52 (Sep): 159–166. https://doi.org/10.11918/201902103.
Chen, J., Z. Zhou, J. Wu, S. Hou, and M. Liu. 2019c. “Field and laboratory measurement of albedo and heat transfer for pavement materials.” Constr. Build. Mater. 202 (Mar): 46–57. https://doi.org/10.1016/j.conbuildmat.2019.01.028.
Chen, Q., C. Wang, H. Fu, and L. Zhang. 2018. “Durability evaluation of road cooling coating.” Constr. Build. Mater. 190 (Nov): 13–23. https://doi.org/10.1016/j.conbuildmat.2018.09.071.
Chinese Standard. 2009. Technical specification for pervious cement concrete pavement of China. CJJ/T 135-2009. Beijing: Jiangsu Construction Engineering Group.
Chinese Standard. 2020. Testing methods of cement and concrete for highway engineering of China. JTG 3420-2020. Beijing: Highway & Transportation Industry Standard.
Chui, E. H., and G. D. Raithby. 1993. “Computation of radiant heat transfer on a nonorthogonal mesh using the finite-volume method.” Numer. Heat Transfer, Part B 23 (3): 269–288. https://doi.org/10.1080/10407799308914901.
Cotana, F., F. Rossi, V. Coccia, A. L. Pisello, E. Bonamente, A. Petrozzi, and G. Cavalaglio. 2014. “Albedo control as an effective strategy to tackle global warming: A case study.” Appl. Energ. 130 (Oct): 641–647. https://doi.org/10.1016/j.apenergy.2014.02.065.
Diz-Mellado, E., V. P. López-Cabeza, C. Rivera-Gómez, J. Roa-Fernández, and C. Galán-Marín. 2020. “Improving school transition spaces microclimate to make them liveable in warm climates.” Appl. Sci. 10 (21): 7648. https://doi.org/10.3390/app10217648.
Ferrari, A., A. Kubilay, D. Derome, and J. Carmeliet. 2020. “The use of permeable and reflective pavements as a potential strategy for urban heat island mitigation.” Urban Clim. 31 (Mar): 100534. https://doi.org/10.1016/j.uclim.2019.100534.
Gui, J., P. E. Phelan, K. E. Kaloush, and J. S. Golden. 2007. “Impact of pavement thermophysical properties on surface temperatures.” J. Mater. Civ. Eng. 19 (8): 683–690. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:8(683).
Huang, X., and Y. Wang. 2019. “Investigating the effects of 3D urban morphology on the surface urban heat island effect in urban functional zones by using high-resolution remote sensing data: A case study of Wuhan, Central China.” ISPRS J. Photogramm. Remote Sens. 152 (Jun): 119–131. https://doi.org/10.1016/j.isprsjprs.2019.04.010.
Jandaghian, Z., and H. Akbari. 2018. “The effects of increasing surface reflectivity on heat-related mortality in Greater Montreal Area, Canada.” Urban Clim. 25 (Sep): 135–151. https://doi.org/10.1016/j.uclim.2018.06.002.
Jin, J., T. Xiao, J. Zheng, R. Liu, G. Qian, J. Xie, H. Wei, J. Zhang, and H. Liu. 2018. “Preparation and thermal properties of encapsulated ceramsite-supported phase change materials used in asphalt pavements.” Constr. Build. Mater. 190 (Nov): 235–245. https://doi.org/10.1016/j.conbuildmat.2018.09.119.
Kalnæs, S. E., and B. P. Jelle. 2015. “Phase change materials and products for building applications: A state-of-the-art review and future research opportunities.” Energy Build. 94 (May): 150–176. https://doi.org/10.1016/j.enbuild.2015.02.023.
Kuai, C., J. Chen, X. Shi, and Z. Grasley. 2021. “Regulating porous asphalt concrete temperature using phase change composite: Experiment and simulation.” Constr. Build. Mater. 273 (Mar): 122043. https://doi.org/10.1016/j.conbuildmat.2020.122043.
Li, K., and Z. Yu. 2008. “Comparative and combinative study of urban heat island in Wuhan City with remote sensing and CFD simulation.” Sensors 8 (10): 6692–6703. https://doi.org/10.3390/s8106692.
Li, Y., L. Liu, and L. Sun. 2020. “Temperature field prediction model for thick asphalt layer.” J. Tongji Univ. (Nat. Sci.) 48 (3): 377–382. https://doi.org/10.11908/j.issn.0253-374x.19039.
Ma, B., W. Si, J. Ren, H.-n. Wang, F.-w. Liu, and J. Li. 2014. “Exploration of road temperature-adjustment material in asphalt mixture.” Road Mater. Pavement Des. 15 (3): 659–673. https://doi.org/10.1080/14680629.2014.885462.
Makvandi, M., B. F. Li, M. Elsadek, Z. Khodabakhshi, and M. Ahmadi. 2019. “The interactive impact of building diversity on the thermal balance and micro-climate change under the influence of rapid urbanization.” Sustainability 11 (6): 1662. https://doi.org/10.3390/su11061662.
Malikov, V., Y. Panasiuk, and V. Strikha. 2016. “About the possibility of applying coloured soil-cement in making road pavement layers.” Mater. Sci. Forum 871 (Oct): 118–125. https://doi.org/10.4028/www.scientific.net/MSF.871.118.
Nazarian, N., and J. Kleissl. 2015. “CFD simulation of an idealized urban environment: Thermal effects of geometrical characteristics and surface materials.” Urban Clim. 12 (Jun): 141–159. https://doi.org/10.1016/j.uclim.2015.03.002.
Piérard, N., J. De Visscher, S. Vansteenkiste, and A. Vanelstraete. 2015. Coloured asphalt pavements: Mix design and laboratory performance testing, 283–294. Dordrecht, Netherlands: Springer.
Santamouris, M. 2013. “Using cool pavements as a mitigation strategy to fight urban heat island—A review of the actual developments.” Renewable Sustainable Energy Rev. 26 (Oct): 224–240. https://doi.org/10.1016/j.rser.2013.05.047.
Santamouris, M., N. Gaitani, A. Spanou, M. Saliari, K. Giannopoulou, K. Vasilakopoulou, and T. Kardomateas. 2012. “Using cool paving materials to improve microclimate of urban areas—Design realization and results of the flisvos project.” Build. Environ. 53 (Jul): 128–136. https://doi.org/10.1016/j.buildenv.2012.01.022.
Santamouris, M., A. Synnefa, and T. Karlessi. 2011. “Using advanced cool materials in the urban built environment to mitigate heat islands and improve thermal comfort conditions.” Sol. Energy 85 (12): 3085–3102. https://doi.org/10.1016/j.solener.2010.12.023.
Sen, S., and J. Roesler. 2019. “Thermal and optical characterization of asphalt field cores for microscale urban heat island analysis.” Constr. Build. Mater. 217 (Aug): 600–611. https://doi.org/10.1016/j.conbuildmat.2019.05.091.
Sen, S., and J. Roesler. 2020. “Wind direction and cool surface strategies on microscale urban heat island.” Urban Clim. 31 (Mar): 100548. https://doi.org/10.1016/j.uclim.2019.100548.
Spitzer, L., Jr. 1950. “On the interpretation of measured solar wave-lengths.” Mon. Not. R. Astron. Soc. 110 (3): 216–219. https://doi.org/10.1093/mnras/110.3.216.
Sultana, S., and A. N. V. Satyanarayana. 2020. “Assessment of urbanisation and urban heat island intensities using landsat imageries during 2000–2018 over a sub-tropical Indian city.” Sustainable Cities Soc. 52 (Jan): 101846. https://doi.org/10.1016/j.scs.2019.101846.
Toparlar, Y., B. Blocken, B. Maiheu, and G. J. F. van Heijst. 2017. “A review on the CFD analysis of urban microclimate.” Renewable Sustainable Energy Rev. 80 (Dec): 1613–1640. https://doi.org/10.1016/j.rser.2017.05.248.
Toparlar, Y., B. Blocken, P. Vos, G. J. F. van Heijst, W. D. Janssen, T. van Hooff, H. Montazeri, and H. J. P. Timmermans. 2015. “CFD simulation and validation of urban microclimate: A case study for Bergpolder Zuid, Rotterdam.” Build. Environ. 83 (Jan): 79–90. https://doi.org/10.1016/j.buildenv.2014.08.004.
Wai, K.-M., C. Yuan, A. Lai, and P. K. N. Yu. 2020. “Relationship between pedestrian-level outdoor thermal comfort and building morphology in a high-density city.” Sci. Total Environ. 708 (Mar): 134516. https://doi.org/10.1016/j.scitotenv.2019.134516.
Wang, X., and Y. Li. 2016. “Predicting urban heat island circulation using CFD.” Build. Environ. 99 (Apr): 82–97. https://doi.org/10.1016/j.buildenv.2016.01.020.
Wen, C.-Y., Y.-H. Juan, and A.-S. Yang. 2017. “Enhancement of city breathability with half open spaces in ideal urban street canyons.” Build. Environ. 112 (Feb): 322–336. https://doi.org/10.1016/j.buildenv.2016.11.048.
Yaghoobian, N., J. Kleissl, and E. S. Krayenhoff. 2010. “Modeling the thermal effects of artificial turf on the urban environment.” J. Appl. Meteorol. Climatol. 49 (3): 332–345. https://doi.org/10.1175/2009JAMC2198.1.
Yang, A.-S., C.-Y. Wen, Y.-H. Juan, Y.-M. Su, and J.-H. Wu. 2014. “Using the central ventilation shaft design within public buildings for natural aeration enhancement.” Appl. Therm. Eng. 70 (1): 219–230. https://doi.org/10.1016/j.applthermaleng.2014.05.017.
Yinfei, D., W. Shengyue, and Z. Jian. 2015. “Cooling asphalt pavement by a highly oriented heat conduction structure.” Energy Build. 102 (Sep): 187–196. https://doi.org/10.1016/j.enbuild.2015.05.020.
Zhang, D., M. Chen, S. Wu, Q. Liu, and J. Wan. 2018. “Preparation of expanded graphite/polyethylene glycol composite phase change material for thermoregulation of asphalt binder.” Constr. Build. Mater. 169 (Apr): 513–521. https://doi.org/10.1016/j.conbuildmat.2018.02.167.
Zheng, M., L. Han, F. Wang, H. Mi, Y. Li, and L. He. 2015. “Comparison and analysis on heat reflective coating for asphalt pavement based on cooling effect and anti-skid performance.” Constr. Build. Mater. 93 (Sep): 1197–1205. https://doi.org/10.1016/j.conbuildmat.2015.04.043.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: May 12, 2022
Accepted: Jun 14, 2023
Published online: Aug 8, 2023
Published in print: Dec 1, 2023
Discussion open until: Jan 8, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.