Fabrication and Performance Evaluation of High-Performance SBS-Modified Asphalt through Secondary Modification with Aminated Graphene Oxide
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 12
Abstract
Adding graphene microflakes with excellent mechanical properties to asphalt materials can promote the development of sustainable transportation infrastructure. Recently, graphene oxide–modified asphalt has gained popularity due to its enhanced storage stability, ease of construction, and high-temperature stability. However, the modification mechanism of graphene oxide and polymer modifiers within asphalt remains unclear. This study aims to investigate the mechanism of action of aminated graphene oxide and styrene-butadiene-styrene (SBS) within asphalt and elucidate their influence on the properties of composite-modified asphalt. This research utilized X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), dynamic shear rheometer (DSR), multiple stress creep recovery (MSCR), bending beam rheometer (BBR), and thermogravimetry analysis (TGA) to explore the performance of composite-modified asphalt and the modification mechanism of modifiers. X-ray diffraction and Fourier transform infrared spectroscopy showed that the modification effect was better, the surface wrinkles of modified graphene oxide increased, and the interlayer spacing expanded, which was favorable to its compatibility with asphalt. Conventional test and Brookfield viscosity revealed that composite-modified asphalt possessed favorable high-temperature resistance and plasticity compared to the original asphalt. Additionally, dynamic shear rheological and storage stability tests indicated that the addition of aminated graphene oxide not only improved the viscoelastic properties of asphalt but also enhanced the compatibility between various substances. Multiple stress creep recovery and bending beam rheometer tests measurements confirm that the composite-modified asphalt exhibits superior high-temperature rutting resistance and low-temperature crack resistance. Fluorescence microscopy analysis demonstrated the uniform distribution of the modifier and SBS within the asphalt, while thermogravimetry analysis revealed that composite-modified asphalt exhibited higher thermal stability compared to SBS-modified asphalt. This study holds significant importance in advancing the development and practical application of road modification materials.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This work was supported by the Research and Innovation Program for Graduate Students in Chongqing (CYB23249) and Chongqing Natural Science Foundation Joint Fund for Innovation and Development Project (CSTB2022NSCQ-LZX0063).
References
ASTM. 2010. Determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR). ASTM D7175-08. West Conshohocken, PA: ASTM.
Bai, J., X. Chen, J. Shao, C. Jia, and Q. Wang. 2019. “Study of breakage of main covalent bonds during co-pyrolysis of oil shale and alkaline lignin by TG-FTIR integrated analysis.” J. Energy Inst. 92 (3): 512–522. https://doi.org/10.1016/j.joei.2018.04.007.
Chinese Standard. 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG E20. Beijing: People’s Communication Press.
Cong, P., X. Wang, P. Xu, J. Liu, R. He, and S. Chen. 2013. “Investigation on properties of polymer modified asphalt containing various antiaging agents.” Polym Degrad. Stab. 98 (12): 2627–2634. https://doi.org/10.1016/j.polymdegradstab.2013.09.024.
Duan, S., J. Li, Y. Muhammad, Z. Su, F. Meng, H. Yang, and X. Yao. 2019a. “Synthesis and evaluation of high-temperature properties of butylated graphene oxide composite incorporated SBS (-GO/SBS)-modified asphalt.” J. Appl. Polym. Sci. 136 (46): 48231. https://doi.org/10.1002/app.48231.
Duan, S., Y. Muhammad, J. Li, S. Maria, F. Meng, Y. Wei, and H. Yang. 2019b. “Enhancing effect of microalgae biodiesel incorporation on the performance of crumb rubber/SBS modified asphalt.” J. Cleaner Prod. 237 (Apr): 117725. https://doi.org/10.1016/j.jclepro.2019.117725.
Fang, C., X. Yu, R. Yu, P. Liu, and X. Qiao. 2016. “Preparation and properties of isocyanate and nano particles composite modified asphalt.” Constr. Build. Mater. 119 (Apr): 113–118. https://doi.org/10.1016/j.conbuildmat.2016.04.099.
Han, M., J. Li, Y. Muhammad, D. Hou, F. Zhang, Y. Yin, and S. Duan. 2018a. “Effect of polystyrene grafted graphene nanoplatelets on the physical and chemical properties of asphalt binder.” Constr. Build. Mater. 174 (Jun): 108–119. https://doi.org/10.1016/j.conbuildmat.2018.04.082.
Han, M., J. Li, Y. Muhammad, Y. Yin, J. Yang, S. Yang, and S. Duan. 2018b. “Studies on the secondary modification of SBS modified asphalt by the application of octadecyl amine grafted graphene nanoplatelets as modifier.” Diamond Relat. Mater. 89 (Jan): 140–150. https://doi.org/10.1016/j.diamond.2018.08.011.
Hao, G., and Y. Wang. 2022. “Identification and evaluation of oil or fuel contaminants in airport asphalt pavements.” J. Mater. Civ. Eng. 34 (10): 04022265. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004381.
He, H., C. Ai, Y. Liu, H. Zou, and A. Rahman. 2023. “Characterization of interlayer bonding mechanism based on interface morphology in double-layered asphalt systems.” J. Mater. Civ. Eng. 35 (6): 04023121. https://doi.org/10.1061/JMCEE7.MTENG-15259.
Hu, K., C. Yu, Q. Yang, Y. Chen, G. Chen, and R. Ma. 2021. “Multi–scale enhancement mechanisms of graphene oxide on styrene–butadiene–styrene modified asphalt: An exploration from molecular dynamics simulations.” Mater. Des. 208 (Sep): 109901. https://doi.org/10.1016/j.matdes.2021.109901.
Huang, W., and N. Tang. 2015. “Characterizing SBS modified asphalt with sulfur using multiple stress creep recovery test.” Constr. Build. Mater. 93 (Feb): 514–521. https://doi.org/10.1016/j.conbuildmat.2015.06.041.
Khan, M. A., and A. J. Puppala. 2023. “Sustainable pavement with geocell reinforced reclaimed-asphalt-pavement (RAP) base layer.” J. Cleaner Prod. 387 (Jun): 135802. https://doi.org/10.1016/j.jclepro.2022.135802.
Kim, K., W. Regan, B. Geng, B. Alemán, B. M. Kessler, F. Wang, and A. Zettl. 2010. “High-temperature stability of suspended single-layer grapheme.” Phys. Status Solidi RRL 4 (11): 302–304. https://doi.org/10.1002/pssr.201000244.
Kim, Y.-R., and D. N. Little. 2004. “Linear viscoelastic analysis of asphalt mastics.” J. Mater. Civ. Eng. 16 (2): 122–132. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:2(122).
Kumar, K., A. Singh, S. K. Maity, M. Srivastava, M. Sahai, R. K. Singh, and M. O. Garg. 2016. “Rheological studies of performance grade bitumens prepared by blending elastomeric SBS (styrene butadiene styrene) co-polymer in base bitumens.” J. Ind. Eng. Chem. 44 (Jan): 112–117. https://doi.org/10.1016/j.jiec.2016.08.017.
Leng, Z., R. K. Padhan, and A. Sreeram. 2018. “Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt.” J. Cleaner Prod. 180 (Sep): 682–688. https://doi.org/10.1016/j.jclepro.2018.01.171.
Li, J., J. Yang, Y. Liu, Z. Zhao, X. Tang, J. Luo, and Y. Muhammad. 2021. “Fabrication of IPDI-LDHs/SBS modified asphalt with enhanced thermal aging and UV aging resistance.” Constr. Build. Mater. 302 (Jun): 124131. https://doi.org/10.1016/j.conbuildmat.2021.124131.
Li, J., S. Yang, Y. Muhammad, M. Sahibzada, Z. Zhu, T. Liu, and S. Liao. 2020. “Fabrication and application of polyurea formaldehyde-bioasphalt microcapsules as a secondary modifier for the preparation of high self-healing rate SBS modified asphalt.” Constr. Build. Mater. 246 (Mar): 118452. https://doi.org/10.1016/j.conbuildmat.2020.118452.
Li, P., Z. Ding, and Z. Zhang. 2013. “Effect of temperature and frequency on visco-elastic dynamic response of asphalt mixture.” J. Test. Eval. 41 (4): 571–578. https://doi.org/10.1520/JTE20120044.
Liu, K., K. Zhang, and X. Shi. 2018a. “Performance evaluation and modification mechanism analysis of asphalt binders modified by graphene oxide.” Constr. Build. Mater. 163 (Apr): 880–889. https://doi.org/10.1016/j.conbuildmat.2017.12.171.
Liu, K., K. Zhang, J. Wu, B. Muhunthan, and X. Shi. 2018b. “Evaluation of mechanical performance and modification mechanism of asphalt modified with graphene oxide and warm mix additives.” J. Cleaner Prod. 193 (Jun): 87–96. https://doi.org/10.1016/j.jclepro.2018.05.040.
Shi, K., Z. Fu, F. Ma, J. Liu, R. Song, J. Li, and Y. Wen. 2022. “Development on the rheological properties and micromorphology of active reagent-rejuvenated SBS-modified asphalt.” ACS Sustainable Chem. Eng. 10 (50): 16734–16751. https://doi.org/10.1021/acssuschemeng.2c05008.
Singh, B. B., F. Mohanty, S. S. Das, and S. K. Swain. 2020a. “Graphene sandwiched crumb rubber dispersed hot mix asphalt.” J. Traffic Transp. Eng. 7 (5): 652–667. https://doi.org/10.1016/j.jtte.2019.02.003.
Singh, D., A. Kuity, S. Girimath, A. Suchismita, and B. Showkat. 2020b. “Investigation of chemical, microstructural, and rheological perspective of asphalt binder modified with graphene oxide.” J. Mater. Civ. Eng. 32 (11): 04020323. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003385.
Su, J. F., J. Qiu, E. Schlangen, and Y. Y. Wang. 2015. “Experimental investigation of self-healing behavior of bitumen/microcapsule composites by a modified beam on elastic foundation method.” Mater Struct. 48 (Sep): 4067–4076. https://doi.org/10.1617/s11527-014-0466-5.
Ting, J. H., E. Khare, A. DeBellis, B. Orr, J. S. Jourdan, F. J. Martín-Martínez, and M. J. Buehler. 2021. “Role of methylene diphenyl diisocyanate (MDI) additives on SBS-modified asphalt with improved thermal stability and mechanical performance.” Energy Fuels 35 (21): 17629–17641. https://doi.org/10.1021/acs.energyfuels.1c02794.
Vasiljevic-Shikaleska, A., F. Popovska-Pavlovska, S. Cimmino, D. Duraccio, and C. Silvestre. 2010. “Viscoelastic properties and morphological characteristics of polymer-modified bitumen blends.” J. Appl. Polym. Sci. 118 (3): 1320–1330. https://doi.org/10.1002/app.32317.
Wei, Y., C. Hu, Y. Muhammad, L. Chen, D. Zhou, S. Wang, and Q. Chen. 2020. “Fabrication and performance evaluation of aminopropyl triethoxysilane-dopamine- incorporated SBS modified asphalt.” Constr. Build. Mater. 265 (Apr): 120346. https://doi.org/10.1016/j.conbuildmat.2020.120346.
Xiao, F., S. Amirkhanian, H. Wang, and P. Hao. 2014. “Rheological property investigations for polymer and polyphosphoric acid modified asphalt binders at high temperatures.” Constr. Build. Mater. 64 (Mar): 316–323. https://doi.org/10.1016/j.conbuildmat.2014.04.082.
Yang, J., Y. Muhammad, C. Yang, Y. Liu, Z. Su, Y. Wei, and J. Li. 2021. “Preparation of incorporated SBS modified asphalt with enhanced resistance against ultraviolet aging.” Constr. Build. Mater. 276 (Sep): 121461. https://doi.org/10.1016/j.conbuildmat.2020.121461.
Yang, S., Y. Liu, M. Yaseen, F. Meng, Y. Wei, and J. Li. 2020. “Concomitantly controlling harmful fumes generation and enhancing mechanical properties of SBS modified asphalt by the incorporation of MIL-101(Cr) as modifier.” J. Mater. Civ. Eng. 32 (8): 04020192. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003215.
Yang, Y., Y. Liu, M. Sun, Z. Song, X. Zhao, and X. Ma. 2016a. “Modification of petroleum asphalt with coal tar pitch extract and pyrolysis properties.” Chem. Ind. Eng. Prog. 35 (2): 479–484. https://doi.org/10.16085/j.issn.1000-6613.2016.02.020.
Yang, Y., J. Wen, L. Guo, X. Wan, P. Du, P. Feng, and Q. Wan. 2016b. “Long-term synaptic plasticity emulated in modified graphene oxide electrolyte gated IZO-based thin-film transistors.” ACS Appl. Mater. Interfaces 8 (44): 30281–30286. https://doi.org/10.1021/acsami.6b08515.
Yu, R., Q. Wang, W. Wang, Y. Xiao, Z. Wang, X. Zhou, and C. Fang. 2021. “Polyurethane/graphene oxide nanocomposite and its modified asphalt binder: Preparation, properties and molecular dynamics simulation.” Mater. Des. 209 (Jan): 109994. https://doi.org/10.1016/j.matdes.2021.109994.
Zeng, Q., Y. Liu, Q. Liu, P. Liu, Y. He, and Y. Zeng. 2020. “Preparation and modification mechanism analysis of graphene oxide modified asphalts.” Constr. Build. Mater. 238 (Jun): 117706. https://doi.org/10.1016/j.conbuildmat.2019.117706.
Zhang, F., J. Li, M. Yaseen, M. Han, Y. Yin, and S. Yang. 2018. “Preparation methods and performance of modified asphalt using rubber–plastic alloy and its compounds.” J. Mater. Civ. Eng. 30 (8): 04018163. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002356.
Zhang, F., J. Yu, and J. Han. 2011. “Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS-and SBS/sulfur-modified asphalts.” Constr. Build. Mater. 25 (1): 129–137. https://doi.org/10.1016/j.conbuildmat.2010.06.048.
Zhang, K., W. S. Cui, Z. Q. Zhang, and S. Q. Jiang. 2014a. “Study on asphalt mixture segregation criteria based on laboratory tests.” J. Wuhan Univ. Technol. 36 (5): 55–61. https://doi.org/10.3963/j.issn.1671-4431.2014.05.011.
Zhang, L., X. Gao, W. Wang, H. Wang, and K. Zheng. 2021. “Laboratory evaluation of rheological properties of asphalt binder modified by Nano-TiO2/CaCO3.” Adv. Mater. Sci. Eng. 2021 (Apr): 1–13. https://doi.org/10.1155/2021/5522025.
Zhang, P., Q. Guo, J. Tao, D. Ma, and Y. Wang. 2019. “Aging mechanism of a diatomite-modified asphalt binder using Fourier-transform infrared (FTIR) spectroscopy analysis.” Materials 12 (6): 988. https://doi.org/10.3390/ma12060988.
Zhang, R., N. Tang, and H. Zhu. 2022a. “The effect of sea salt solution erosion on cohesion, chemical and rheological properties of SBS modified asphalt.” Constr. Build. Mater. 318 (Dec): 125923. https://doi.org/10.1016/j.conbuildmat.2021.125923.
Zhang, X., S. Zhou, H. Zhou, and D. Li. 2022b. “The effect of the modification of graphene oxide with -aminopropyltriethoxysilane (KH550) on the properties and hydration of cement.” Constr. Build. Mater. 322 (Nov): 126497. https://doi.org/10.1016/j.conbuildmat.2022.126497.
Zhang, Y., J. E. Mark, Y. Zhu, R. S. Ruoff, and D. W. Schaefer. 2014b. “Mechanical properties of polybutadiene reinforced with octadecylamine modified graphene oxide.” Polymer 55 (21): 5389–5395. https://doi.org/10.1016/j.polymer.2014.08.065.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Nov 9, 2023
Accepted: May 2, 2024
Published online: Sep 27, 2024
Published in print: Dec 1, 2024
Discussion open until: Feb 27, 2025
ASCE Technical Topics:
- Analysis (by type)
- Composite materials
- Design (by type)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Equipment and machinery
- Load and resistance factor design
- Load factors
- Material mechanics
- Material properties
- Materials engineering
- Measurement (by type)
- Measuring instruments
- Rubber
- Structural design
- Structural engineering
- Temperature (by type)
- Temperature effects
- Temperature measurement
- Thermal analysis
- Thermal properties
- Thermodynamics
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.