Development of Bioregenerant and Its Potential Application: Investigation for Regeneration of RAP Materials
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 9
Abstract
To achieve efficient utilization of reclaimed asphalt pavement (RAP) materials, a bioregenerant (BR) was developed in this research, and waste vegetable oil (WVO), alkylphenol polyoxyethylene ether (APEO), plasticizer [tributyl acetylcitrate (ATBC)] and tackifying resin (FTR) were chosen as components of the regenerant. The composition ratio of BR was designed based on the response surface method (RSM), and the optimal BR dosage and the regeneration effect of BR on the bioregenerated mixture (BRM) with different RAP contents were determined and investigated. Results showed that the optimal composition ratio of BR was found to be . The addition of BR significantly reduced the high-temperature stability and aging resistance of the mixture, but improved its low-temperature cracking resistance and fatigue resistance. Additionally, BR prominently contributed to the improvement for the water stability of the regenerated mixture, and its regeneration effect was found to be similar to that of two commercial regenerants, although excessive BR led to the decline of water stability. Moreover, the high-temperature stability and aging resistance of BRM when mixed with 20%, 30%, and 40% RAP were similar to those of the new asphalt mixture (NAM). At 20%, 30%, and 40% RAP content, both the low-temperature cracking resistance and fatigue resistance of BRM met the requirements. However, when the RAP content exceeded 40%, the water stability of BRM went beyond the specification limit. Taking into account the overall road performance, it is suggested that the optimal BR dosage is 5%–9%, and the maximum RAP content ensuring the road performance of BRM meets the requirements is 40%. These research findings will contribute to addressing the stacking problem of reclaimed asphalt pavement materials and environmental pollution, aligning with green and environmentally friendly sustainable development principles.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors gratefully acknowledge the Hubei University of Arts and Science and Chang’an University for providing all necessary conditions to come up with this work. The research has also been funded by the Fundamental Research Project of Science and Technology Department of Shanxi Province under Grant No. 202203021222428, and the economic support is gratefully acknowledged.
References
Al-Sabaeei, A. M., M. B. Napiah, M. H. Sutanto, W. S. Alaloul, and A. Usman. 2020. “A systematic review of bio-asphalt for flexible pavement applications: Coherent taxonomy, motivations, challenges and future directions.” J. Cleaner Prod. 249 (Mar): 119357. https://doi.org/10.1016/j.jclepro.2019.119357.
Asli, H., E. Ahmadinia, M. Zargar, and M. R. Karim. 2012. “Investigation on physical properties of waste cooking oil-rejuvenated bitumen binder.” Constr. Build. Mater. 37 (Dec): 398–405. https://doi.org/10.1016/j.conbuildmat.2012.07.042.
Cai, X., J. Zhang, G. Xu, M. H. Gong, and J. Yang. 2019. “Internal aging indexes to characterize the aging behavior of two bio-rejuvenated asphalts.” J. Cleaner Prod. 220 (May): 1231–1238. https://doi.org/10.1016/j.jclepro.2019.02.203.
Chen, M., B. Leng, S. Wu, and Y. Sang. 2014. “Physical, chemical and rheological properties of waste edible vegetable oil rejuvenated asphalt binders.” Constr. Build. Mater. 66 (36): 286–298. https://doi.org/10.1016/j.conbuildmat.2014.05.033.
Devulapalli, L., S. Kothandaraman, and G. Sarang. 2019. “Evaluation of rejuvenator’s effectiveness on the reclaimed asphalt pavement incorporated stone matrix asphalt mixtures.” Constr. Build. Mater. 224 (Nov): 909–919. https://doi.org/10.1016/j.conbuildmat.2019.07.126.
Elkashef, M., J. Podolsky, R. C. Williams, and E. W. Cochran. 2017a. “Introducing a soybean oil-derived material as a potential rejuvenator of asphalt through rheology, mix characterization and Fourier transform infrared analysis.” Road Mater. Pavement Des. 19 (7–8): 1750–1770. https://doi.org/10.1080/14680629.2017.1345781.
Elkashef, M., R. Podolsky, R. C. Williams, and E. Cochran. 2017b. “Preliminary examination of soybean oil derived material as a potential rejuvenator through Superpave criteria and asphalt bitumen rheology.” Constr. Build. Mater. 149 (Sep): 826–836. https://doi.org/10.1016/j.conbuildmat.2017.05.195.
Fan, Y., A. Edith, L. Robert, M. Amy Epps, and C. Lorena Garcia. 2014. “Novel method for moisture susceptibility and rutting evaluation using Hamburg wheel tracking test.” Transp. Res. Rec. 2446 (1): 1–7. https://doi.org/10.3141/2446-01.
Fang, Y., Z. Zhang, J. Yang, and X. Li. 2021. “Comprehensive review on the application of bio-rejuvenator in the regeneration of waste asphalt materials.” Constr. Build. Mater. 295 (Aug): 123631. https://doi.org/10.1016/j.conbuildmat.2021.123631.
Fang, Y., Z. Zhang, J. Yang, and X. Li. 2022a. “Composition design of waste vegetable oil-based rejuvenator based on RSM and performance evaluation of rejuvenated asphalt.” J. Mater. Civ. Eng. 34 (7): 04022136. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004284.
Fang, Y., Z. Zhang, J. Yang, and X. Li. 2022b. “Performance characterization of bio-recycled asphalt and gray correlation analysis between its components and macro-properties.” J. Mater. Civ. Eng. 34 (3): 04021490. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004127.
Fang, Y., Z. Zhang, H. Zhang, and W. Li. 2022c. “Analysis of wetting behavior and its influencing factors of rejuvenator/old asphalt interface based on surface wetting theory.” Constr. Build. Mater. 314 (Jan): 125674. https://doi.org/10.1016/j.conbuildmat.2021.125674.
Gao, J., J. Yang, D. Yu, Y. Jiang, and L. Luo. 2021. “Reducing the variability of multi-source reclaimed asphalt pavement materials: A practice in China.” Constr. Build. Mater. 278 (Apr): 122389. https://doi.org/10.1016/j.conbuildmat.2021.122389.
Haghshenas, H. E., A. Khodaii, M. Khedmati, and S. Tapkin. 2015. “A mathematical model for predicting stripping potential of hot mix asphalt.” Constr. Build. Mater. 75 (75): 488–495. https://doi.org/10.1016/j.conbuildmat.2014.11.041.
Hugener, M., M. N. Partl, and M. Morant. 2014. “Cold asphalt recycling with 100% reclaimed asphalt pavement and vegetable oil-based rejuvenators.” Road Mater. Pavement Des. 15 (2): 239–258. https://doi.org/10.1080/14680629.2013.860910.
Kaseer, F., E. Arámbula-Mercado, L. G. Cucalon, and A. E. Martin. 2020. “Performance of asphalt mixtures with high recycled materials content and recycling agents.” Int. J. Pavement Eng. 21 (7): 863–877. https://doi.org/10.1080/10298436.2018.1511990.
Kuang, D. L., Z. G. Feng, J. Y. Yu, X. Chen, and B. Zhou. 2011. “A new approach for evaluating rejuvenator diffusing into aged bitumen.” J. Wuhan Univ. Technol. Mater. Sci. Ed. 26 (1): 43–46. https://doi.org/10.1007/s11595-011-0164-x.
Leng, B. B., M. Z. Chen, and S. P. Wu. 2014a. “Effect of waste edible vegetable oil on high temperature properties of different aged asphalts.” Key Eng. Mater. 599 (May): 135–140. https://doi.org/10.4028/www.scientific.net/KEM.599.135.
Leng, B. B., M. Z. Chen, and S. P. Wu. 2014b. “Research on physical properties of recycled asphalt with waste vegetable oil.” Highway 59 (2): 175–179.
Li, Z. H., G. F. Wang, and J. M. Wei. 2011. “Preparation of recycling agent and evaluation on recycled asphalt.” J. China Univ. Pet. 35 (5): 152–156. https://doi.org/10.3969/j.issn.1673-5005.2011.05.029.
Moghaddam, T. B., M. Soltani, and M. R. Karim. 2015a. “Stiffness modulus of polyethylene terephthalate modified asphalt mixture: A statistical analysis of the laboratory testing results.” Mater. Des. 68 (Mar): 88–96. https://doi.org/10.1016/j.matdes.2014.11.044.
Moghaddam, T. B., M. Soltani, M. R. Karim, and H. Baaj. 2015b. “Optimization of asphalt and modifier contents for polyethylene terephthalate modified asphalt mixtures using response surface methodology.” Measurement 74 (Oct): 159–169. https://doi.org/10.1016/j.measurement.2015.07.012.
MOT (Ministry of Transport of the People’s Republic of China). 2017. Standard test methods of bitumen and bituminous mixtures for highway engineering. [In Chinese]. JTG E20-2011. Beijing: MOT.
Nassar, A. I., N. Thom, and T. Parry. 2016. “Optimizing the mix design of cold bitumen emulsion mixtures using response surface methodology.” Constr. Build. Mater. 104 (Feb): 216–229. https://doi.org/10.1016/j.conbuildmat.2015.12.073.
Rayhan, B., and K. H. Ahmed. 2020. “Waste cooking oil as an asphalt rejuvenator: A state-of-the-art review.” Constr. Build. Mater. 230 (Jan): 116985. https://doi.org/10.1016/j.conbuildmat.2019.116985.
Wang, X. B. 2019. Application of high volume RAP in thermal regeneration technology of asphalt pavement. Zhengzhou, China: Zhengzhou Univ.
Xu, S., J. Yu, C. B. Hu, D. F. Qin, and L. H. Xue. 2017. “Laboratory evaluation of rejuvenation effect of reactive rejuvenator on aged SBS modified bitumen.” Mater. Struct. 50 (6): 233. https://doi.org/10.1617/s11527-017-1106-7.
Zargar, M., E. Ahmadinia, H. Asli, and M. R. Karim. 2012. “Investigation of the possibility of using waste cooking oil as a rejuvenating agent for aged bitumen.” J. Hazard. Mater. 233 (Sep): 254–258. https://doi.org/10.1016/j.jhazmat.2012.06.021.
Zaumanis, M., R. B. Mallick, and R. Frank. 2015. “Evaluation of different recycling agents for restoring aged asphalt binder and performance of 100% recycled asphalt.” Mater. Struct. 48 (8): 2475–2488. https://doi.org/10.1617/s11527-014-0332-5.
Zhang, J. Z., X. M. Zhang, M. Liang, H. G. Jiang, and Z. Y. Yao. 2020. “Influence of different rejuvenating agents on rheological behavior and dynamic response of recycled asphalt mixtures incorporating 60% RAP dosage.” Constr. Build. Mater. 238 (Mar): 117778. https://doi.org/10.1016/j.conbuildmat.2019.117778.
Zhang, Y. 2013. “Study on aging mechanism of asphalt and development of rejuvenator.” Accessed October 30, 2021. https://kns.cnki.net/kcms/detail/detail.aspx?FileName=1015328967.nh&DbName=CMFD2016.
Zhang, Z. Q., Y. F. Luo, and K. Zhang. 2017. “Review on Hamburg wheel-track device evaluation of asphalt mixture.” Mater. Rev. 31 (3): 96–105. https://doi.org/10.11896/j.issn.1005-023X.2017.03.016.
Ziari, H., A. Moniri, P. Bahri, and Y. Saghafi. 2019. “The effect of rejuvenators on the aging resistance of recycled asphalt mixtures.” Constr. Build. Mater. 224 (Nov): 89–98. https://doi.org/10.1016/j.conbuildmat.2019.06.181.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Oct 11, 2023
Accepted: Mar 1, 2024
Published online: Jun 25, 2024
Published in print: Sep 1, 2024
Discussion open until: Nov 25, 2024
ASCE Technical Topics:
- Asphalt pavements
- Construction materials
- Design (by type)
- Engineering fundamentals
- Engineering materials (by type)
- Hydration
- Infrastructure
- Laminating
- Load and resistance factor design
- Load factors
- Materials characterization
- Materials engineering
- Materials processing
- Measurement (by type)
- Mixtures
- Pavements
- Recycling
- Structural design
- Temperature effects
- Temperature measurement
- Transportation engineering
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.