Self-Regulating the Temperature of Permeable Concrete Based on Phase Change Materials
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 6
Abstract
Phase change microcapsules are a type of energy storage material that can affect temperature changes by changing its material state and releasing or absorbing latent heat. In this paper, the temperature effect of phase change microcapsules on permeable concrete is investigated. Cooling, heating, and snow melting tests were performed on ordinary permeable concrete and test blocks with different contents of phase change microcapsules. The results indicate that the addition of phase change microcapsules to ordinary permeable concrete has several benefits. First, it effectively raises the internal temperature of concrete in cold conditions. Second, it prolongs the heating duration of concrete in high-temperature environments. Last, it helps in reducing the maximum temperature reached by the concrete. Moreover, the heat storage capacity of phase change microcapsules prevents the refreezing of melted snow water within the concrete. With the increase of the content of phase change microcapsules, the temperature-regulating effect of the test blocks is improved. To sum up, phase change materials can exhibit temperature-regulating effect on permeable concrete under different environmental conditions and have wide applications in the design, manufacture, and performance research of permeable concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The study is supported by the National Natural Science Foundation of China (U1906234, U2106224, 51974124)
References
Bentz, D. P., and R. Turpin. 2007. “Potential applications of phase change materials in concrete technology.” Cem. Concr. Compos. 29 (7): 527–532. https://doi.org/10.1016/j.cemconcomp.2007.04.007.
Chavan, S., V. Gumtapure, and D. A. Perumal. 2021. “Performance assessment of composite phase change materials for thermal energy storage: Characterization and simulation studies.” Recent Pat. Mech. Eng. 14 (1): 75–85. https://doi.org/10.2174/2212797613999200708140952.
Chen, X., W. Liu, and Z. Jiang. 2017. “Utilization of phase change materials to improve the frost resistance of cement based materials.” Bull. Chin. Ceram. Soc. 36 (10): 3330–3335. https://doi.org/10.16552/j.cnki.issn1001-1625.2017.10.019.
Cheng, C., G. Cheng, F. Gong, Y. Fu, and J. Qiao. 2021. “Performance evaluation of asphalt mixture using polyethylene glycol polyacrylamide graft copolymer as solid–solid phase change materials.” Constr. Build. Mater. 300 (Jul): 1–13. https://doi.org/10.1016/J.CONBUILDMAT.2021.124221.
Errebai, F. B., S. Chikh, L. Derradji, M. Amara, and Z. Younsi. 2020. “Optimum mass percentage of microencapsulated PCM mixed with gypsum for improved latent heat storage.” J. Storage Mater. 33 (Jan): 101910. https://doi.org/10.1016/j.est.2020.101910.
Farnam, Y., H. S. Esmaeeli, P. D. Zavattieri, J. Haddock, and J. Weiss. 2017. “Incorporating phase change materials in concrete pavement to melt snow and ice.” Cem. Concr. Compos. 84 (2017): 134–145. https://doi.org/10.1016/j.cemconcomp.2017.09.002.
Farnam, Y., M. J. Krafcik, L. C. Liston, and W. Weiss. 2015. “Evaluating the use of phase change materials in concrete pavement to melt ice and snow.” J. Mater. Civ. Eng. 28 (4): 04015161. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001439.
Feijoo, J., M. A. Alvarez-Feijoo, R. Fort, E. Arce, and D. Ergenç. 2022. “Effects of paraffin additives, as phase change materials, on the behavior of a traditional lime mortar.” Constr. Build. Mater. 361 (Dec): 129734. https://doi.org/10.1016/j.conbuildmat.2022.129734.
Feng, Z., D. Hu, L. Zhao, and C. Xue. 2015. “Applications of phase change material to road engineering.” Supplement, Mater. Rep. 29 (S1): 144–147.
Fernandes, F., S. Manari, M. Aguayo, K. Santos, and G. Sant. 2014. “On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials.” Cem. Concr. Compos. 51 (Aug): 14–26. https://doi.org/10.1016/j.cemconcomp.2014.03.003.
Ghabchi, R., D. Singh, and M. Zaman. 2015. “Laboratory evaluation of stiffness, low-temperature cracking, rutting, moisture damage, and fatigue performance of WMA mixes.” Road Mater. Pavement Des. 16 (2): 334–357. https://doi.org/10.1080/14680629.2014.1000943.
Hu, S., and B. Fan. 2019. “Study on the bilinear softening mode and fracture parameters of concrete in low temperature environments.” Eng. Fract. Mech. 211 (Apr): 1–16. https://doi.org/10.1016/j.engfracmech.2019.02.002.
Jun, C., Z. Cheng, L. Quan, X. Shi, and Z. Sun. 2023. “Investigation on frost heaving stress (FHS) of porous cement concrete exposed to freeze-thaw cycles.” Cold Reg. Sci. Technol. 205 (May): 1–10. https://doi.org/10.1016/J.COLDREGIONS.2022.103694.
Kevern, J. T., D. Biddle, and Q. Cao. 2014. “Effects of macrosynthetic fibers on pervious concrete properties.” J. Mater. Civ. Eng. 27 (9): 119–134. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001213.
Li, D., Y. Wu, C. Liu, G. Zhang, and M. Arıcı. 2018. “Energy investigation of glazed windows containing Nano-PCM in different seasons.” Energy Convers. Manage. 172 (Apr): 119–128. https://doi.org/10.1016/j.enconman.2018.07.015.
Liu, T., N. Guo, Y. Tan, Z. You, and X. Jin. 2020. “Research and development trend of road usage phase change materials.” Mater. Rep. 34 (23): 23179–23189. https://doi.org/10.11896/cldb.19090191.
Liu, X., G. Ke, and B. Tian. 2015. “Recent research of the application of phase change materials in mass concrete.” New Build. Mater. 42 (5): 81–85. https://doi.org/10.3969/j.issn.1001-702X.2015.05.024.
Lu, J., M. Qu, and S. Tian. 2020. “Thermal performances of micro-encapsulated phase change materials/aerated concrete composite materials.” J. Build. Mater. 23 (2): 341–363.
Rehder, B., K. Banh, and N. Neithalath. 2014. “Fracture behavior of pervious concretes: The effects of pore structure and fibers.” Eng. Fract. Mech. 118 (Jun): 1–16. https://doi.org/10.1016/j.engfracmech.2014.01.015.
Saffari, M., A. De Gracia, C. Fernández, and L. F. Cabeza. 2017. “Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings.” Appl. Energy 202 (Sep): 420–434. https://doi.org/10.1016/j.apenergy.2017.05.107.
Sakulich, A. R., and D. P. Bentz. 2012. “Increasing the service life of bridge decks by incorporating phase-change materials to reduce freeze-thaw cycles.” J. Mater. Civ. Eng. 24 (8): 1034–1042. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000381.
Sanfilippo, D., A. Garcia-Hernández, A. Alexiadis, and B. Ghiassi. 2022. “Effect of freeze–thaw cycles on the void topologies and mechanical properties of asphalt.” Constr. Build. Mater. 344 (Aug): 128085. https://doi.org/10.1016/j.conbuildmat.2022.128085.
Sassani, A., A. Arabzadeh, H. Ceylan, S. Kim, S. M. S. Sadati, K. Gopalakrishnan, P. C. Taylor, and H. Abdualla. 2018. “Carbon fiber-based electrically conductive concrete for salt-free deicing of pavements.” J. Cleaner Prod. 203 (Jun): 799–809. https://doi.org/10.1016/j.jclepro.2018.08.315.
Šavija, B., and E. Schlangen. 2016. “Use of phase change materials (PCMs) to mitigate early age thermal cracking in concrete: Theoretical considerations.” Constr. Build. Mater. 126 (Apr): 332–344. https://doi.org/10.1016/j.conbuildmat.2016.09.046.
Seeniraj, A. P. V. V. 2008. “Phase change material-based building architecture for thermal management in residential and commercial establishments.” Renewable Sustainable Energy Rev. 12 (1): 39–64. https://doi.org/10.1016/j.rser.2006.05.010.
She, Z., Z. Wei, B. A. Young, G. Falzone, N. Neithalath, G. Sant, and L. Pilon. 2019. “Examining the effects of microencapsulated phase change materials on early-age temperature evolutions in realistic pavement geometries.” Cem. Concr. Compos. 103 (Feb): 149–159. https://doi.org/10.1016/j.cemconcomp.2019.04.002.
Snoeck, D., B. Priem, P. Dubruel, and N. De Belie. 2016. “Encapsulated phase-change materials as additives in cementitious materials to promote thermal comfort in concrete constructions.” Mater. Struct. 49 (1–2): 225–239. https://doi.org/10.1617/s11527-014-0490-5.
Sun, R., H. Li, F. Huang, Z. Wang, and Z. Yi. 2020. “Application of phase change materials in cement-based materials.” Bull. Chin. Ceram. Soc. 39 (3): 662–676.
Suo, W. 2022. “Analysis of pavement performance of asphalt concrete under high temperature.” Resour. Inf. Eng. 37 (2): 93–100. https://doi.org/10.19534/j.cnki.zyxxygc.2022.02.009.
Tianye, W., and Q. Xiaoping. 2023. “Topology optimization of HCM/PCM composites for thermal energy storage.” J. Storage Mater. 73 (PB): 108972. https://doi.org/10.1016/J.EST.2023.108972.
Wang, X., S. Geng, D. Wang, and Z. Dong. 2022. “The discussion of municipal road drainage design and key issues under sponge city concept.” Supplement, Water Wastewater Eng. 48 (S1): 569–573. https://doi.org/10.13789/j.cnki.wwe1964.2021.04.28.0006.
Worsman, R. 2014. “An evaluation of the potential of geosynthetic reinforced chip seals to reduce asphalt pavement temperatures.” Masters theses, Dept. of Civil Engineering, Worcester Polytechnic Institute.
Wu, H., B. Huang, X. Shu, and Q. Dong. 2011. “Laboratory evaluation of abrasion resistance of portland cement pervious concrete.” J. Mater. Civ. Eng. 23 (5): 697–702. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000210.
Xu, H., H. Shi, Y. Tan, Q. Ye, and X. Liu. 2022. “Modeling and assessment of operation economic benefits for hydronic snow melting pavement system.” Appl. Energy 326 (Nov): 119977. https://doi.org/10.1016/j.apenergy.2022.119977.
Young, B. A., G. Falzone, Z. She, A. M. Thiele, Z. Wei, N. Neithalath, G. Sant, and L. Pilon. 2017. “Early-age temperature evolutions in concrete pavements containing microencapsulated phase change materials.” Constr. Build. Mater. 147 (Apr): 466–477. https://doi.org/10.1016/j.conbuildmat.2017.04.150.
Zhang, C., P. Ren, P. Deng, Z. Zhu, X. Gao, and S. Guo. 2022. “Study on mechanical properties and durability concrete containing recycled performance of pervious aggregate.” J. Hunan Univ. (Nat. Sci.) 50 (03): 185–194. https://doi.org/10.16339/j.cnki.hdxbzkb.2023042.
Zhang, H., and H. Cui. 2015. “Review of the applications of incorporating phase change materials into concrete.” Supplement, Mater. Rep. 29 (S1): 131–135.
Zhang, H., S. Sun, X. Wang, and D. Wu. 2011. “Fabrication of microencapsulated phase change materials based on n-octadecane core and silica shell through interfacial polycondensation.” Colloids Surf., A 389 (1): 104–117. https://doi.org/10.1016/j.colsurfa.2011.08.043.
Zhou, G., and J. He. 2015. “Thermal performance of a radiant floor heating system with different heat storage materials and heating pipes.” Appl. Energy 138 (Feb): 648–660. https://doi.org/10.1016/j.apenergy.2014.10.058.
Zhu, H., C. Wen, Z. Wang, and L. Li. 2020. “Study on the permeability of recycled aggregate pervious concrete with fibers.” Materials 13 (2): 321. https://doi.org/10.3390/ma13020321.
Zong, Y., R. Xiong, Y. Tian, M. Chang, X. Wang, J. Yu, Y. Zhang, B. Feng, H. Wang, and C. Li. 2022. “Preparation and temperature susceptibility evaluation of crumb rubber modified asphalt applied in alpine regions.” Coatings 12 (4): 496. https://doi.org/10.3390/coatings12040496.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: May 23, 2023
Accepted: Nov 15, 2023
Published online: Mar 19, 2024
Published in print: Jun 1, 2024
Discussion open until: Aug 19, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.